list_del(element);
/* Point to Rx buffer via next RBD in circular buffer */
- rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->dma_addr);
+ rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->aligned_dma_addr);
rxq->queue[rxq->write] = rxb;
rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
rxq->free_count--;
rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
/* Alloc a new receive buffer */
- rxb->skb = alloc_skb(priv->hw_params.rx_buf_size,
+ rxb->skb = alloc_skb(priv->hw_params.rx_buf_size + 256,
__GFP_NOWARN | GFP_ATOMIC);
if (!rxb->skb) {
if (net_ratelimit())
list_del(element);
/* Get physical address of RB/SKB */
- rxb->dma_addr =
- pci_map_single(priv->pci_dev, rxb->skb->data,
- priv->hw_params.rx_buf_size, PCI_DMA_FROMDEVICE);
+ rxb->real_dma_addr = pci_map_single(
+ priv->pci_dev,
+ rxb->skb->data,
+ priv->hw_params.rx_buf_size + 256,
+ PCI_DMA_FROMDEVICE);
+ /* dma address must be no more than 36 bits */
+ BUG_ON(rxb->real_dma_addr & ~DMA_BIT_MASK(36));
+ /* and also 256 byte aligned! */
+ rxb->aligned_dma_addr = ALIGN(rxb->real_dma_addr, 256);
+ skb_reserve(rxb->skb, rxb->aligned_dma_addr - rxb->real_dma_addr);
+
list_add_tail(&rxb->list, &rxq->rx_free);
rxq->free_count++;
}
for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
if (rxq->pool[i].skb != NULL) {
pci_unmap_single(priv->pci_dev,
- rxq->pool[i].dma_addr,
- priv->hw_params.rx_buf_size,
+ rxq->pool[i].real_dma_addr,
+ priv->hw_params.rx_buf_size + 256,
PCI_DMA_FROMDEVICE);
dev_kfree_skb(rxq->pool[i].skb);
}
* to an SKB, so we need to unmap and free potential storage */
if (rxq->pool[i].skb != NULL) {
pci_unmap_single(priv->pci_dev,
- rxq->pool[i].dma_addr,
- priv->hw_params.rx_buf_size,
+ rxq->pool[i].real_dma_addr,
+ priv->hw_params.rx_buf_size + 256,
PCI_DMA_FROMDEVICE);
priv->alloc_rxb_skb--;
dev_kfree_skb(rxq->pool[i].skb);
{
int ret;
unsigned long flags;
- unsigned int rb_size;
+ u32 rb_size;
+ const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
+ const u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT why this stalls RX */
spin_lock_irqsave(&priv->lock, flags);
ret = iwl_grab_nic_access(priv);
/* Tell device where to find RBD circular buffer in DRAM */
iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
- rxq->dma_addr >> 8);
+ (u32)(rxq->dma_addr >> 8));
/* Tell device where in DRAM to update its Rx status */
iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG,
(priv->shared_phys + priv->rb_closed_offset) >> 4);
- /* Enable Rx DMA, enable host interrupt, Rx buffer size 4k, 256 RBDs */
+ /* Enable Rx DMA
+ * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set becuase of HW bug in
+ * the credit mechanism in 5000 HW RX FIFO
+ * Direct rx interrupts to hosts
+ * Rx buffer size 4 or 8k
+ * RB timeout 0x10
+ * 256 RBDs
+ */
iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG,
FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
+ FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY |
FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
- rb_size |
- /* 0x10 << 4 | */
- (RX_QUEUE_SIZE_LOG <<
- FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT));
-
- /*
- * iwl_write32(priv,CSR_INT_COAL_REG,0);
- */
+ rb_size|
+ (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
+ (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
iwl_release_nic_access(priv);
+
+ iwl_write32(priv, CSR_INT_COALESCING, 0x40);
+
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
#endif
-static void iwl_add_radiotap(struct iwl_priv *priv,
- struct sk_buff *skb,
- struct iwl_rx_phy_res *rx_start,
- struct ieee80211_rx_status *stats,
- u32 ampdu_status)
-{
- s8 signal = stats->signal;
- s8 noise = 0;
- int rate = stats->rate_idx;
- u64 tsf = stats->mactime;
- __le16 antenna;
- __le16 phy_flags_hw = rx_start->phy_flags;
- struct iwl4965_rt_rx_hdr {
- struct ieee80211_radiotap_header rt_hdr;
- __le64 rt_tsf; /* TSF */
- u8 rt_flags; /* radiotap packet flags */
- u8 rt_rate; /* rate in 500kb/s */
- __le16 rt_channelMHz; /* channel in MHz */
- __le16 rt_chbitmask; /* channel bitfield */
- s8 rt_dbmsignal; /* signal in dBm, kluged to signed */
- s8 rt_dbmnoise;
- u8 rt_antenna; /* antenna number */
- } __attribute__ ((packed)) *iwl4965_rt;
-
- /* TODO: We won't have enough headroom for HT frames. Fix it later. */
- if (skb_headroom(skb) < sizeof(*iwl4965_rt)) {
- if (net_ratelimit())
- printk(KERN_ERR "not enough headroom [%d] for "
- "radiotap head [%zd]\n",
- skb_headroom(skb), sizeof(*iwl4965_rt));
- return;
- }
-
- /* put radiotap header in front of 802.11 header and data */
- iwl4965_rt = (void *)skb_push(skb, sizeof(*iwl4965_rt));
-
- /* initialise radiotap header */
- iwl4965_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
- iwl4965_rt->rt_hdr.it_pad = 0;
-
- /* total header + data */
- put_unaligned_le16(sizeof(*iwl4965_rt), &iwl4965_rt->rt_hdr.it_len);
-
- /* Indicate all the fields we add to the radiotap header */
- put_unaligned_le32((1 << IEEE80211_RADIOTAP_TSFT) |
- (1 << IEEE80211_RADIOTAP_FLAGS) |
- (1 << IEEE80211_RADIOTAP_RATE) |
- (1 << IEEE80211_RADIOTAP_CHANNEL) |
- (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) |
- (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) |
- (1 << IEEE80211_RADIOTAP_ANTENNA),
- &(iwl4965_rt->rt_hdr.it_present));
-
- /* Zero the flags, we'll add to them as we go */
- iwl4965_rt->rt_flags = 0;
-
- put_unaligned_le64(tsf, &iwl4965_rt->rt_tsf);
-
- iwl4965_rt->rt_dbmsignal = signal;
- iwl4965_rt->rt_dbmnoise = noise;
-
- /* Convert the channel frequency and set the flags */
- put_unaligned(cpu_to_le16(stats->freq), &iwl4965_rt->rt_channelMHz);
- if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK))
- put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ,
- &iwl4965_rt->rt_chbitmask);
- else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK)
- put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ,
- &iwl4965_rt->rt_chbitmask);
- else /* 802.11g */
- put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ,
- &iwl4965_rt->rt_chbitmask);
-
- if (rate == -1)
- iwl4965_rt->rt_rate = 0;
- else
- iwl4965_rt->rt_rate = iwl_rates[rate].ieee;
-
- /*
- * "antenna number"
- *
- * It seems that the antenna field in the phy flags value
- * is actually a bitfield. This is undefined by radiotap,
- * it wants an actual antenna number but I always get "7"
- * for most legacy frames I receive indicating that the
- * same frame was received on all three RX chains.
- *
- * I think this field should be removed in favour of a
- * new 802.11n radiotap field "RX chains" that is defined
- * as a bitmask.
- */
- antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK;
- iwl4965_rt->rt_antenna = le16_to_cpu(antenna) >> 4;
-
- /* set the preamble flag if appropriate */
- if (phy_flags_hw & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
- iwl4965_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
-
- stats->flag |= RX_FLAG_RADIOTAP;
-}
-
static void iwl_update_rx_stats(struct iwl_priv *priv, u16 fc, u16 len)
{
/* 0 - mgmt, 1 - cnt, 2 - data */
iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats))
return;
- if (priv->add_radiotap)
- iwl_add_radiotap(priv, rxb->skb, rx_start, stats, ampdu_status);
-
iwl_update_rx_stats(priv, le16_to_cpu(hdr->frame_control), len);
ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats);
priv->alloc_rxb_skb--;
/* Filter incoming packets to determine if they are targeted toward
* this network, discarding packets coming from ourselves */
switch (priv->iw_mode) {
- case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */
+ case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */
/* packets to our IBSS update information */
return !compare_ether_addr(header->addr3, priv->bssid);
- case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */
+ case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */
/* packets to our IBSS update information */
return !compare_ether_addr(header->addr2, priv->bssid);
default:
if (rx_status.band == IEEE80211_BAND_5GHZ)
rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
- rx_status.antenna = 0;
rx_status.flag = 0;
/* TSF isn't reliable. In order to allow smooth user experience,
rx_status.signal, rx_status.noise, rx_status.signal,
(unsigned long long)rx_status.mactime);
+ /*
+ * "antenna number"
+ *
+ * It seems that the antenna field in the phy flags value
+ * is actually a bitfield. This is undefined by radiotap,
+ * it wants an actual antenna number but I always get "7"
+ * for most legacy frames I receive indicating that the
+ * same frame was received on all three RX chains.
+ *
+ * I think this field should be removed in favour of a
+ * new 802.11n radiotap field "RX chains" that is defined
+ * as a bitmask.
+ */
+ rx_status.antenna = le16_to_cpu(rx_start->phy_flags &
+ RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
+
+ /* set the preamble flag if appropriate */
+ if (rx_start->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
+ rx_status.flag |= RX_FLAG_SHORTPRE;
+
/* Take shortcut when only in monitor mode */
- if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
+ if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
iwl_pass_packet_to_mac80211(priv, include_phy,
rxb, &rx_status);
return;
switch (fc & IEEE80211_FCTL_FTYPE) {
case IEEE80211_FTYPE_MGMT:
case IEEE80211_FTYPE_DATA:
- if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
+ if (priv->iw_mode == NL80211_IFTYPE_AP)
iwl_update_ps_mode(priv, fc & IEEE80211_FCTL_PM,
header->addr2);
/* fall through */
projects / linux-2.6-omap-h63xx.git / blobdiff