if (test_bit(STATUS_SCANNING, &priv->status)) {
if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG_SCAN("Queuing scan abort.\n");
+ IWL_DEBUG_SCAN(priv, "Queuing scan abort.\n");
set_bit(STATUS_SCAN_ABORTING, &priv->status);
queue_work(priv->workqueue, &priv->abort_scan);
} else
- IWL_DEBUG_SCAN("Scan abort already in progress.\n");
+ IWL_DEBUG_SCAN(priv, "Scan abort already in progress.\n");
return test_bit(STATUS_SCANNING, &priv->status);
}
* can occur if we send the scan abort before we
* the microcode has notified us that a scan is
* completed. */
- IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status);
+ IWL_DEBUG_INFO(priv, "SCAN_ABORT returned %d.\n", res->u.status);
clear_bit(STATUS_SCAN_ABORTING, &priv->status);
clear_bit(STATUS_SCAN_HW, &priv->status);
}
struct iwl_scanreq_notification *notif =
(struct iwl_scanreq_notification *)pkt->u.raw;
- IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status);
+ IWL_DEBUG_RX(priv, "Scan request status = 0x%x\n", notif->status);
#endif
}
struct iwl_scanstart_notification *notif =
(struct iwl_scanstart_notification *)pkt->u.raw;
priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
- IWL_DEBUG_SCAN("Scan start: "
+ IWL_DEBUG_SCAN(priv, "Scan start: "
"%d [802.11%s] "
"(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
notif->channel,
struct iwl_scanresults_notification *notif =
(struct iwl_scanresults_notification *)pkt->u.raw;
- IWL_DEBUG_SCAN("Scan ch.res: "
+ IWL_DEBUG_SCAN(priv, "Scan ch.res: "
"%d [802.11%s] "
"(TSF: 0x%08X:%08X) - %d "
"elapsed=%lu usec (%dms since last)\n",
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
- IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
+ IWL_DEBUG_SCAN(priv, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
scan_notif->scanned_channels,
scan_notif->tsf_low,
scan_notif->tsf_high, scan_notif->status);
/* The scan completion notification came in, so kill that timer... */
cancel_delayed_work(&priv->scan_check);
- IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
+ IWL_DEBUG_INFO(priv, "Scan pass on %sGHz took %dms\n",
(priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
"2.4" : "5.2",
jiffies_to_msecs(elapsed_jiffies
* then we reset the scan state machine and terminate,
* re-queuing another scan if one has been requested */
if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG_INFO("Aborted scan completed.\n");
+ IWL_DEBUG_INFO(priv, "Aborted scan completed.\n");
clear_bit(STATUS_SCAN_ABORTING, &priv->status);
} else {
/* If there are more bands on this scan pass reschedule */
priv->last_scan_jiffies = jiffies;
priv->next_scan_jiffies = 0;
- IWL_DEBUG_INFO("Setting scan to off\n");
+ IWL_DEBUG_INFO(priv, "Setting scan to off\n");
clear_bit(STATUS_SCANNING, &priv->status);
- IWL_DEBUG_INFO("Scan took %dms\n",
+ IWL_DEBUG_INFO(priv, "Scan took %dms\n",
jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies)));
queue_work(priv->workqueue, &priv->scan_completed);
ch_info = iwl_get_channel_info(priv, band, channel);
if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
+ IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n",
channel);
continue;
}
else
scan_ch->tx_gain = ((1 << 5) | (5 << 3));
- IWL_DEBUG_SCAN("Scanning ch=%d prob=0x%X [%s %d]\n",
+ IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n",
channel, le32_to_cpu(scan_ch->type),
(scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
"ACTIVE" : "PASSIVE",
added++;
}
- IWL_DEBUG_SCAN("total channels to scan %d \n", added);
+ IWL_DEBUG_SCAN(priv, "total channels to scan %d \n", added);
return added;
}
int iwl_scan_initiate(struct iwl_priv *priv)
{
if (!iwl_is_ready_rf(priv)) {
- IWL_DEBUG_SCAN("Aborting scan due to not ready.\n");
+ IWL_DEBUG_SCAN(priv, "Aborting scan due to not ready.\n");
return -EIO;
}
if (test_bit(STATUS_SCANNING, &priv->status)) {
- IWL_DEBUG_SCAN("Scan already in progress.\n");
+ IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
return -EAGAIN;
}
if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG_SCAN("Scan request while abort pending\n");
+ IWL_DEBUG_SCAN(priv, "Scan request while abort pending\n");
return -EAGAIN;
}
- IWL_DEBUG_INFO("Starting scan...\n");
+ IWL_DEBUG_INFO(priv, "Starting scan...\n");
if (priv->cfg->sku & IWL_SKU_G)
priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
if (priv->cfg->sku & IWL_SKU_A)
}
EXPORT_SYMBOL(iwl_scan_initiate);
+#define IWL_DELAY_NEXT_SCAN (HZ*2)
+
+int iwl_mac_hw_scan(struct ieee80211_hw *hw,
+ struct cfg80211_scan_request *req)
+{
+ unsigned long flags;
+ struct iwl_priv *priv = hw->priv;
+ int ret;
+ u8 *ssid = NULL;
+ size_t ssid_len = 0;
+
+ if (req->n_ssids) {
+ ssid = req->ssids[0].ssid;
+ ssid_len = req->ssids[0].ssid_len;
+ }
+
+ IWL_DEBUG_MAC80211(priv, "enter\n");
+
+ mutex_lock(&priv->mutex);
+ spin_lock_irqsave(&priv->lock, flags);
+
+ if (!iwl_is_ready_rf(priv)) {
+ ret = -EIO;
+ IWL_DEBUG_MAC80211(priv, "leave - not ready or exit pending\n");
+ goto out_unlock;
+ }
+
+ /* We don't schedule scan within next_scan_jiffies period.
+ * Avoid scanning during possible EAPOL exchange, return
+ * success immediately.
+ */
+ if (priv->next_scan_jiffies &&
+ time_after(priv->next_scan_jiffies, jiffies)) {
+ IWL_DEBUG_SCAN(priv, "scan rejected: within next scan period\n");
+ queue_work(priv->workqueue, &priv->scan_completed);
+ ret = 0;
+ goto out_unlock;
+ }
+
+ /* if we just finished scan ask for delay */
+ if (iwl_is_associated(priv) && priv->last_scan_jiffies &&
+ time_after(priv->last_scan_jiffies + IWL_DELAY_NEXT_SCAN, jiffies)) {
+ IWL_DEBUG_SCAN(priv, "scan rejected: within previous scan period\n");
+ queue_work(priv->workqueue, &priv->scan_completed);
+ ret = 0;
+ goto out_unlock;
+ }
+
+ if (ssid_len) {
+ priv->one_direct_scan = 1;
+ priv->direct_ssid_len = ssid_len;
+ memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len);
+ } else {
+ priv->one_direct_scan = 0;
+ }
+
+ ret = iwl_scan_initiate(priv);
+
+ IWL_DEBUG_MAC80211(priv, "leave\n");
+
+out_unlock:
+ spin_unlock_irqrestore(&priv->lock, flags);
+ mutex_unlock(&priv->mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(iwl_mac_hw_scan);
+
#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
void iwl_bg_scan_check(struct work_struct *data)
mutex_lock(&priv->mutex);
if (test_bit(STATUS_SCANNING, &priv->status) ||
test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG(IWL_DL_SCAN, "Scan completion watchdog resetting "
+ IWL_DEBUG_SCAN(priv, "Scan completion watchdog resetting "
"adapter (%dms)\n",
jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
/* This should never be called or scheduled if there is currently
* a scan active in the hardware. */
if (test_bit(STATUS_SCAN_HW, &priv->status)) {
- IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. "
+ IWL_DEBUG_INFO(priv, "Multiple concurrent scan requests in parallel. "
"Ignoring second request.\n");
ret = -EIO;
goto done;
}
if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
- IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n");
+ IWL_DEBUG_SCAN(priv, "Aborting scan due to device shutdown\n");
goto done;
}
if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG_HC("Scan request while abort pending. Queuing.\n");
+ IWL_DEBUG_HC(priv, "Scan request while abort pending. Queuing.\n");
goto done;
}
if (iwl_is_rfkill(priv)) {
- IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n");
+ IWL_DEBUG_HC(priv, "Aborting scan due to RF Kill activation\n");
goto done;
}
if (!test_bit(STATUS_READY, &priv->status)) {
- IWL_DEBUG_HC("Scan request while uninitialized. Queuing.\n");
+ IWL_DEBUG_HC(priv, "Scan request while uninitialized. Queuing.\n");
goto done;
}
if (!priv->scan_bands) {
- IWL_DEBUG_HC("Aborting scan due to no requested bands\n");
+ IWL_DEBUG_HC(priv, "Aborting scan due to no requested bands\n");
goto done;
}
u32 scan_suspend_time = 100;
unsigned long flags;
- IWL_DEBUG_INFO("Scanning while associated...\n");
+ IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
spin_lock_irqsave(&priv->lock, flags);
interval = priv->beacon_int;
scan_suspend_time = (extra |
((suspend_time % interval) * 1024));
scan->suspend_time = cpu_to_le32(scan_suspend_time);
- IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n",
+ IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
scan_suspend_time, interval);
}
/* We should add the ability for user to lock to PASSIVE ONLY */
if (priv->one_direct_scan) {
- IWL_DEBUG_SCAN("Start direct scan for '%s'\n",
+ IWL_DEBUG_SCAN(priv, "Start direct scan for '%s'\n",
print_ssid(ssid, priv->direct_ssid,
priv->direct_ssid_len));
scan->direct_scan[0].id = WLAN_EID_SSID;
priv->direct_ssid, priv->direct_ssid_len);
n_probes++;
} else {
- IWL_DEBUG_SCAN("Start indirect scan.\n");
+ IWL_DEBUG_SCAN(priv, "Start indirect scan.\n");
}
scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
if (scan->channel_count == 0) {
- IWL_DEBUG_SCAN("channel count %d\n", scan->channel_count);
+ IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
goto done;
}
struct iwl_priv *priv =
container_of(work, struct iwl_priv, scan_completed);
- IWL_DEBUG_SCAN("SCAN complete scan\n");
+ IWL_DEBUG_SCAN(priv, "SCAN complete scan\n");
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
- ieee80211_scan_completed(priv->hw);
+ ieee80211_scan_completed(priv->hw, false);
/* Since setting the TXPOWER may have been deferred while
* performing the scan, fire one off */
projects / linux-2.6-omap-h63xx.git / blobdiff