* This file contains definitions of WLAN commands.
*/
-#ifndef _HOST_H_
-#define _HOST_H_
+#ifndef _LBS_HOST_H_
+#define _LBS_HOST_H_
/** PUBLIC DEFINITIONS */
-#define DEFAULT_AD_HOC_CHANNEL 6
-#define DEFAULT_AD_HOC_CHANNEL_A 36
+#define DEFAULT_AD_HOC_CHANNEL 6
+#define DEFAULT_AD_HOC_CHANNEL_A 36
/** IEEE 802.11 oids */
-#define OID_802_11_SSID 0x00008002
-#define OID_802_11_INFRASTRUCTURE_MODE 0x00008008
-#define OID_802_11_FRAGMENTATION_THRESHOLD 0x00008009
-#define OID_802_11_RTS_THRESHOLD 0x0000800A
-#define OID_802_11_TX_ANTENNA_SELECTED 0x0000800D
-#define OID_802_11_SUPPORTED_RATES 0x0000800E
-#define OID_802_11_STATISTICS 0x00008012
-#define OID_802_11_TX_RETRYCOUNT 0x0000801D
-#define OID_802_11D_ENABLE 0x00008020
-
-#define cmd_option_waitforrsp 0x0002
-
-/** Host command ID */
-#define cmd_code_dnld 0x0002
-#define cmd_get_hw_spec 0x0003
-#define cmd_eeprom_update 0x0004
-#define cmd_802_11_reset 0x0005
-#define cmd_802_11_scan 0x0006
-#define cmd_802_11_get_log 0x000b
-#define cmd_mac_multicast_adr 0x0010
-#define cmd_802_11_authenticate 0x0011
-#define cmd_802_11_eeprom_access 0x0059
-#define cmd_802_11_associate 0x0050
-#define cmd_802_11_set_wep 0x0013
-#define cmd_802_11_get_stat 0x0014
-#define cmd_802_3_get_stat 0x0015
-#define cmd_802_11_snmp_mib 0x0016
-#define cmd_mac_reg_map 0x0017
-#define cmd_bbp_reg_map 0x0018
-#define cmd_mac_reg_access 0x0019
-#define cmd_bbp_reg_access 0x001a
-#define cmd_rf_reg_access 0x001b
-#define cmd_802_11_radio_control 0x001c
-#define cmd_802_11_rf_channel 0x001d
-#define cmd_802_11_rf_tx_power 0x001e
-#define cmd_802_11_rssi 0x001f
-#define cmd_802_11_rf_antenna 0x0020
-
-#define cmd_802_11_ps_mode 0x0021
-
-#define cmd_802_11_data_rate 0x0022
-#define cmd_rf_reg_map 0x0023
-#define cmd_802_11_deauthenticate 0x0024
-#define cmd_802_11_reassociate 0x0025
-#define cmd_802_11_disassociate 0x0026
-#define cmd_mac_control 0x0028
-#define cmd_802_11_ad_hoc_start 0x002b
-#define cmd_802_11_ad_hoc_join 0x002c
-
-#define cmd_802_11_query_tkip_reply_cntrs 0x002e
-#define cmd_802_11_enable_rsn 0x002f
-#define cmd_802_11_pairwise_tsc 0x0036
-#define cmd_802_11_group_tsc 0x0037
-#define cmd_802_11_key_material 0x005e
-
-#define cmd_802_11_set_afc 0x003c
-#define cmd_802_11_get_afc 0x003d
-
-#define cmd_802_11_ad_hoc_stop 0x0040
-
-#define cmd_802_11_beacon_stop 0x0049
-
-#define cmd_802_11_mac_address 0x004D
-#define cmd_802_11_eeprom_access 0x0059
-
-#define cmd_802_11_band_config 0x0058
-
-#define cmd_802_11d_domain_info 0x005b
-
-#define cmd_802_11_sleep_params 0x0066
-
-#define cmd_802_11_inactivity_timeout 0x0067
-
-#define cmd_802_11_tpc_cfg 0x0072
-#define cmd_802_11_pwr_cfg 0x0073
-
-#define cmd_802_11_led_gpio_ctrl 0x004e
-
-#define cmd_802_11_subscribe_event 0x0075
-
-#define cmd_802_11_rate_adapt_rateset 0x0076
-
-#define cmd_802_11_tx_rate_query 0x007f
-
-#define cmd_get_tsf 0x0080
-
-#define cmd_bt_access 0x0087
-#define cmd_ret_bt_access 0x8087
-
-#define cmd_fwt_access 0x0088
-#define cmd_ret_fwt_access 0x8088
-
-#define cmd_mesh_access 0x0090
-#define cmd_ret_mesh_access 0x8090
+#define OID_802_11_SSID 0x00008002
+#define OID_802_11_INFRASTRUCTURE_MODE 0x00008008
+#define OID_802_11_FRAGMENTATION_THRESHOLD 0x00008009
+#define OID_802_11_RTS_THRESHOLD 0x0000800A
+#define OID_802_11_TX_ANTENNA_SELECTED 0x0000800D
+#define OID_802_11_SUPPORTED_RATES 0x0000800E
+#define OID_802_11_STATISTICS 0x00008012
+#define OID_802_11_TX_RETRYCOUNT 0x0000801D
+#define OID_802_11D_ENABLE 0x00008020
+
+#define CMD_OPTION_WAITFORRSP 0x0002
+
+/** Host command IDs */
+
+/* Return command are almost always the same as the host command, but with
+ * bit 15 set high. There are a few exceptions, though...
+ */
+#define CMD_RET(cmd) (0x8000 | cmd)
+
+/* Return command convention exceptions: */
+#define CMD_RET_802_11_ASSOCIATE 0x8012
+
+/* Command codes */
+#define CMD_GET_HW_SPEC 0x0003
+#define CMD_EEPROM_UPDATE 0x0004
+#define CMD_802_11_RESET 0x0005
+#define CMD_802_11_SCAN 0x0006
+#define CMD_802_11_GET_LOG 0x000b
+#define CMD_MAC_MULTICAST_ADR 0x0010
+#define CMD_802_11_AUTHENTICATE 0x0011
+#define CMD_802_11_EEPROM_ACCESS 0x0059
+#define CMD_802_11_ASSOCIATE 0x0050
+#define CMD_802_11_SET_WEP 0x0013
+#define CMD_802_11_GET_STAT 0x0014
+#define CMD_802_3_GET_STAT 0x0015
+#define CMD_802_11_SNMP_MIB 0x0016
+#define CMD_MAC_REG_MAP 0x0017
+#define CMD_BBP_REG_MAP 0x0018
+#define CMD_MAC_REG_ACCESS 0x0019
+#define CMD_BBP_REG_ACCESS 0x001a
+#define CMD_RF_REG_ACCESS 0x001b
+#define CMD_802_11_RADIO_CONTROL 0x001c
+#define CMD_802_11_RF_CHANNEL 0x001d
+#define CMD_802_11_RF_TX_POWER 0x001e
+#define CMD_802_11_RSSI 0x001f
+#define CMD_802_11_RF_ANTENNA 0x0020
+#define CMD_802_11_PS_MODE 0x0021
+#define CMD_802_11_DATA_RATE 0x0022
+#define CMD_RF_REG_MAP 0x0023
+#define CMD_802_11_DEAUTHENTICATE 0x0024
+#define CMD_802_11_REASSOCIATE 0x0025
+#define CMD_802_11_DISASSOCIATE 0x0026
+#define CMD_MAC_CONTROL 0x0028
+#define CMD_802_11_AD_HOC_START 0x002b
+#define CMD_802_11_AD_HOC_JOIN 0x002c
+#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e
+#define CMD_802_11_ENABLE_RSN 0x002f
+#define CMD_802_11_SET_AFC 0x003c
+#define CMD_802_11_GET_AFC 0x003d
+#define CMD_802_11_AD_HOC_STOP 0x0040
+#define CMD_802_11_HOST_SLEEP_CFG 0x0043
+#define CMD_802_11_WAKEUP_CONFIRM 0x0044
+#define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045
+#define CMD_802_11_BEACON_STOP 0x0049
+#define CMD_802_11_MAC_ADDRESS 0x004d
+#define CMD_802_11_LED_GPIO_CTRL 0x004e
+#define CMD_802_11_EEPROM_ACCESS 0x0059
+#define CMD_802_11_BAND_CONFIG 0x0058
+#define CMD_802_11D_DOMAIN_INFO 0x005b
+#define CMD_802_11_KEY_MATERIAL 0x005e
+#define CMD_802_11_SLEEP_PARAMS 0x0066
+#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067
+#define CMD_802_11_SLEEP_PERIOD 0x0068
+#define CMD_802_11_TPC_CFG 0x0072
+#define CMD_802_11_FW_WAKE_METHOD 0x0074
+#define CMD_802_11_SUBSCRIBE_EVENT 0x0075
+#define CMD_802_11_RATE_ADAPT_RATESET 0x0076
+#define CMD_802_11_TX_RATE_QUERY 0x007f
+#define CMD_GET_TSF 0x0080
+#define CMD_BT_ACCESS 0x0087
+#define CMD_FWT_ACCESS 0x0095
+#define CMD_802_11_MONITOR_MODE 0x0098
+#define CMD_MESH_ACCESS 0x009b
+#define CMD_MESH_CONFIG 0x00a3
+#define CMD_SET_BOOT2_VER 0x00a5
+#define CMD_802_11_BEACON_CTRL 0x00b0
/* For the IEEE Power Save */
-#define cmd_subcmd_enter_ps 0x0030
-#define cmd_subcmd_exit_ps 0x0031
-#define cmd_subcmd_sleep_confirmed 0x0034
-#define cmd_subcmd_full_powerdown 0x0035
-#define cmd_subcmd_full_powerup 0x0036
-
-/* command RET code, MSB is set to 1 */
-#define cmd_ret_hw_spec_info 0x8003
-#define cmd_ret_eeprom_update 0x8004
-#define cmd_ret_802_11_reset 0x8005
-#define cmd_ret_802_11_scan 0x8006
-#define cmd_ret_802_11_get_log 0x800b
-#define cmd_ret_mac_control 0x8028
-#define cmd_ret_mac_multicast_adr 0x8010
-#define cmd_ret_802_11_authenticate 0x8011
-#define cmd_ret_802_11_deauthenticate 0x8024
-#define cmd_ret_802_11_associate 0x8012
-#define cmd_ret_802_11_reassociate 0x8025
-#define cmd_ret_802_11_disassociate 0x8026
-#define cmd_ret_802_11_set_wep 0x8013
-#define cmd_ret_802_11_stat 0x8014
-#define cmd_ret_802_3_stat 0x8015
-#define cmd_ret_802_11_snmp_mib 0x8016
-#define cmd_ret_mac_reg_map 0x8017
-#define cmd_ret_bbp_reg_map 0x8018
-#define cmd_ret_rf_reg_map 0x8023
-#define cmd_ret_mac_reg_access 0x8019
-#define cmd_ret_bbp_reg_access 0x801a
-#define cmd_ret_rf_reg_access 0x801b
-#define cmd_ret_802_11_radio_control 0x801c
-#define cmd_ret_802_11_rf_channel 0x801d
-#define cmd_ret_802_11_rssi 0x801f
-#define cmd_ret_802_11_rf_tx_power 0x801e
-#define cmd_ret_802_11_rf_antenna 0x8020
-#define cmd_ret_802_11_ps_mode 0x8021
-#define cmd_ret_802_11_data_rate 0x8022
-
-#define cmd_ret_802_11_ad_hoc_start 0x802B
-#define cmd_ret_802_11_ad_hoc_join 0x802C
-
-#define cmd_ret_802_11_query_tkip_reply_cntrs 0x802e
-#define cmd_ret_802_11_enable_rsn 0x802f
-#define cmd_ret_802_11_pairwise_tsc 0x8036
-#define cmd_ret_802_11_group_tsc 0x8037
-#define cmd_ret_802_11_key_material 0x805e
-
-#define cmd_enable_rsn 0x0001
-#define cmd_disable_rsn 0x0000
-
-#define cmd_act_set 0x0001
-#define cmd_act_get 0x0000
-
-#define cmd_act_get_AES (cmd_act_get + 2)
-#define cmd_act_set_AES (cmd_act_set + 2)
-#define cmd_act_remove_aes (cmd_act_set + 3)
-
-#define cmd_ret_802_11_set_afc 0x803c
-#define cmd_ret_802_11_get_afc 0x803d
-
-#define cmd_ret_802_11_ad_hoc_stop 0x8040
-
-#define cmd_ret_802_11_beacon_stop 0x8049
-
-#define cmd_ret_802_11_mac_address 0x804D
-#define cmd_ret_802_11_eeprom_access 0x8059
-
-#define cmd_ret_802_11_band_config 0x8058
-
-#define cmd_ret_802_11_sleep_params 0x8066
-
-#define cmd_ret_802_11_inactivity_timeout 0x8067
-
-#define cmd_ret_802_11d_domain_info (0x8000 | \
- cmd_802_11d_domain_info)
-
-#define cmd_ret_802_11_tpc_cfg (cmd_802_11_tpc_cfg | 0x8000)
-#define cmd_ret_802_11_pwr_cfg (cmd_802_11_pwr_cfg | 0x8000)
-
-#define cmd_ret_802_11_led_gpio_ctrl 0x804e
-
-#define cmd_ret_802_11_subscribe_event (cmd_802_11_subscribe_event | 0x8000)
-
-#define cmd_ret_802_11_rate_adapt_rateset (cmd_802_11_rate_adapt_rateset | 0x8000)
-
-#define cmd_rte_802_11_tx_rate_query (cmd_802_11_tx_rate_query | 0x8000)
-
-#define cmd_ret_get_tsf 0x8080
-
-/* Define action or option for cmd_802_11_set_wep */
-#define cmd_act_add 0x0002
-#define cmd_act_remove 0x0004
-#define cmd_act_use_default 0x0008
-
-#define cmd_type_wep_40_bit 0x0001
-#define cmd_type_wep_104_bit 0x0002
-
-#define cmd_NUM_OF_WEP_KEYS 4
-
-#define cmd_WEP_KEY_INDEX_MASK 0x3fff
-
-/* Define action or option for cmd_802_11_reset */
-#define cmd_act_halt 0x0003
-
-/* Define action or option for cmd_802_11_scan */
-#define cmd_bss_type_bss 0x0001
-#define cmd_bss_type_ibss 0x0002
-#define cmd_bss_type_any 0x0003
-
-/* Define action or option for cmd_802_11_scan */
-#define cmd_scan_type_active 0x0000
-#define cmd_scan_type_passive 0x0001
-
-#define cmd_scan_radio_type_bg 0
-
-#define cmd_scan_probe_delay_time 0
-
-/* Define action or option for cmd_mac_control */
-#define cmd_act_mac_rx_on 0x0001
-#define cmd_act_mac_tx_on 0x0002
-#define cmd_act_mac_loopback_on 0x0004
-#define cmd_act_mac_wep_enable 0x0008
-#define cmd_act_mac_int_enable 0x0010
-#define cmd_act_mac_multicast_enable 0x0020
-#define cmd_act_mac_broadcast_enable 0x0040
-#define cmd_act_mac_promiscuous_enable 0x0080
-#define cmd_act_mac_all_multicast_enable 0x0100
-#define cmd_act_mac_strict_protection_enable 0x0400
-
-/* Define action or option for cmd_802_11_radio_control */
-#define cmd_type_auto_preamble 0x0001
-#define cmd_type_short_preamble 0x0002
-#define cmd_type_long_preamble 0x0003
-
-#define TURN_ON_RF 0x01
-#define RADIO_ON 0x01
-#define RADIO_OFF 0x00
-
-#define SET_AUTO_PREAMBLE 0x05
-#define SET_SHORT_PREAMBLE 0x03
-#define SET_LONG_PREAMBLE 0x01
+#define CMD_SUBCMD_ENTER_PS 0x0030
+#define CMD_SUBCMD_EXIT_PS 0x0031
+#define CMD_SUBCMD_SLEEP_CONFIRMED 0x0034
+#define CMD_SUBCMD_FULL_POWERDOWN 0x0035
+#define CMD_SUBCMD_FULL_POWERUP 0x0036
+
+#define CMD_ENABLE_RSN 0x0001
+#define CMD_DISABLE_RSN 0x0000
+
+#define CMD_ACT_GET 0x0000
+#define CMD_ACT_SET 0x0001
+#define CMD_ACT_GET_AES 0x0002
+#define CMD_ACT_SET_AES 0x0003
+#define CMD_ACT_REMOVE_AES 0x0004
+
+/* Define action or option for CMD_802_11_SET_WEP */
+#define CMD_ACT_ADD 0x0002
+#define CMD_ACT_REMOVE 0x0004
+#define CMD_ACT_USE_DEFAULT 0x0008
+
+#define CMD_TYPE_WEP_40_BIT 0x01
+#define CMD_TYPE_WEP_104_BIT 0x02
+
+#define CMD_NUM_OF_WEP_KEYS 4
+
+#define CMD_WEP_KEY_INDEX_MASK 0x3fff
+
+/* Define action or option for CMD_802_11_RESET */
+#define CMD_ACT_HALT 0x0003
+
+/* Define action or option for CMD_802_11_SCAN */
+#define CMD_BSS_TYPE_BSS 0x0001
+#define CMD_BSS_TYPE_IBSS 0x0002
+#define CMD_BSS_TYPE_ANY 0x0003
+
+/* Define action or option for CMD_802_11_SCAN */
+#define CMD_SCAN_TYPE_ACTIVE 0x0000
+#define CMD_SCAN_TYPE_PASSIVE 0x0001
+
+#define CMD_SCAN_RADIO_TYPE_BG 0
+
+#define CMD_SCAN_PROBE_DELAY_TIME 0
+
+/* Define action or option for CMD_MAC_CONTROL */
+#define CMD_ACT_MAC_RX_ON 0x0001
+#define CMD_ACT_MAC_TX_ON 0x0002
+#define CMD_ACT_MAC_LOOPBACK_ON 0x0004
+#define CMD_ACT_MAC_WEP_ENABLE 0x0008
+#define CMD_ACT_MAC_INT_ENABLE 0x0010
+#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020
+#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040
+#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
+#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
+#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400
+
+/* Define action or option for CMD_802_11_RADIO_CONTROL */
+#define CMD_TYPE_AUTO_PREAMBLE 0x0001
+#define CMD_TYPE_SHORT_PREAMBLE 0x0002
+#define CMD_TYPE_LONG_PREAMBLE 0x0003
+
+/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
+#define CMD_SUBSCRIBE_RSSI_LOW 0x0001
+#define CMD_SUBSCRIBE_SNR_LOW 0x0002
+#define CMD_SUBSCRIBE_FAILCOUNT 0x0004
+#define CMD_SUBSCRIBE_BCNMISS 0x0008
+#define CMD_SUBSCRIBE_RSSI_HIGH 0x0010
+#define CMD_SUBSCRIBE_SNR_HIGH 0x0020
+
+#define TURN_ON_RF 0x01
+#define RADIO_ON 0x01
+#define RADIO_OFF 0x00
+
+#define SET_AUTO_PREAMBLE 0x05
+#define SET_SHORT_PREAMBLE 0x03
+#define SET_LONG_PREAMBLE 0x01
/* Define action or option for CMD_802_11_RF_CHANNEL */
-#define cmd_opt_802_11_rf_channel_get 0x00
-#define cmd_opt_802_11_rf_channel_set 0x01
-
-/* Define action or option for cmd_802_11_rf_tx_power */
-#define cmd_act_tx_power_opt_get 0x0000
-#define cmd_act_tx_power_opt_set_high 0x8007
-#define cmd_act_tx_power_opt_set_mid 0x8004
-#define cmd_act_tx_power_opt_set_low 0x8000
-
-#define cmd_act_tx_power_index_high 0x0007
-#define cmd_act_tx_power_index_mid 0x0004
-#define cmd_act_tx_power_index_low 0x0000
-
-/* Define action or option for cmd_802_11_data_rate */
-#define cmd_act_set_tx_auto 0x0000
-#define cmd_act_set_tx_fix_rate 0x0001
-#define cmd_act_get_tx_rate 0x0002
-
-#define cmd_act_set_rx 0x0001
-#define cmd_act_set_tx 0x0002
-#define cmd_act_set_both 0x0003
-#define cmd_act_get_rx 0x0004
-#define cmd_act_get_tx 0x0008
-#define cmd_act_get_both 0x000c
-
-/* Define action or option for cmd_802_11_ps_mode */
-#define cmd_type_cam 0x0000
-#define cmd_type_max_psp 0x0001
-#define cmd_type_fast_psp 0x0002
-
-/* Define action or option for cmd_bt_access */
+#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00
+#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01
+
+/* Define action or option for CMD_802_11_RF_TX_POWER */
+#define CMD_ACT_TX_POWER_OPT_GET 0x0000
+#define CMD_ACT_TX_POWER_OPT_SET_HIGH 0x8007
+#define CMD_ACT_TX_POWER_OPT_SET_MID 0x8004
+#define CMD_ACT_TX_POWER_OPT_SET_LOW 0x8000
+
+#define CMD_ACT_TX_POWER_INDEX_HIGH 0x0007
+#define CMD_ACT_TX_POWER_INDEX_MID 0x0004
+#define CMD_ACT_TX_POWER_INDEX_LOW 0x0000
+
+/* Define action or option for CMD_802_11_DATA_RATE */
+#define CMD_ACT_SET_TX_AUTO 0x0000
+#define CMD_ACT_SET_TX_FIX_RATE 0x0001
+#define CMD_ACT_GET_TX_RATE 0x0002
+
+#define CMD_ACT_SET_RX 0x0001
+#define CMD_ACT_SET_TX 0x0002
+#define CMD_ACT_SET_BOTH 0x0003
+#define CMD_ACT_GET_RX 0x0004
+#define CMD_ACT_GET_TX 0x0008
+#define CMD_ACT_GET_BOTH 0x000c
+
+/* Define action or option for CMD_802_11_PS_MODE */
+#define CMD_TYPE_CAM 0x0000
+#define CMD_TYPE_MAX_PSP 0x0001
+#define CMD_TYPE_FAST_PSP 0x0002
+
+/* Options for CMD_802_11_FW_WAKE_METHOD */
+#define CMD_WAKE_METHOD_UNCHANGED 0x0000
+#define CMD_WAKE_METHOD_COMMAND_INT 0x0001
+#define CMD_WAKE_METHOD_GPIO 0x0002
+
+/* Define action or option for CMD_BT_ACCESS */
enum cmd_bt_access_opts {
/* The bt commands start at 5 instead of 1 because the old dft commands
* are mapped to 1-4. These old commands are no longer maintained and
* should not be called.
*/
- cmd_act_bt_access_add = 5,
- cmd_act_bt_access_del,
- cmd_act_bt_access_list,
- cmd_act_bt_access_reset
+ CMD_ACT_BT_ACCESS_ADD = 5,
+ CMD_ACT_BT_ACCESS_DEL,
+ CMD_ACT_BT_ACCESS_LIST,
+ CMD_ACT_BT_ACCESS_RESET,
+ CMD_ACT_BT_ACCESS_SET_INVERT,
+ CMD_ACT_BT_ACCESS_GET_INVERT
};
-/* Define action or option for cmd_fwt_access */
+/* Define action or option for CMD_FWT_ACCESS */
enum cmd_fwt_access_opts {
- cmd_act_fwt_access_add = 1,
- cmd_act_fwt_access_del,
- cmd_act_fwt_access_lookup,
- cmd_act_fwt_access_list,
- cmd_act_fwt_access_list_route,
- cmd_act_fwt_access_list_neighbor,
- cmd_act_fwt_access_reset,
- cmd_act_fwt_access_cleanup,
- cmd_act_fwt_access_time,
+ CMD_ACT_FWT_ACCESS_ADD = 1,
+ CMD_ACT_FWT_ACCESS_DEL,
+ CMD_ACT_FWT_ACCESS_LOOKUP,
+ CMD_ACT_FWT_ACCESS_LIST,
+ CMD_ACT_FWT_ACCESS_LIST_ROUTE,
+ CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
+ CMD_ACT_FWT_ACCESS_RESET,
+ CMD_ACT_FWT_ACCESS_CLEANUP,
+ CMD_ACT_FWT_ACCESS_TIME,
};
-/* Define action or option for cmd_mesh_access */
+/* Define action or option for CMD_MESH_ACCESS */
enum cmd_mesh_access_opts {
- cmd_act_mesh_get_ttl = 1,
- cmd_act_mesh_set_ttl,
- cmd_act_mesh_get_stats,
- cmd_act_mesh_get_mpp,
- cmd_act_mesh_set_mpp,
+ CMD_ACT_MESH_GET_TTL = 1,
+ CMD_ACT_MESH_SET_TTL,
+ CMD_ACT_MESH_GET_STATS,
+ CMD_ACT_MESH_GET_ANYCAST,
+ CMD_ACT_MESH_SET_ANYCAST,
+ CMD_ACT_MESH_SET_LINK_COSTS,
+ CMD_ACT_MESH_GET_LINK_COSTS,
+ CMD_ACT_MESH_SET_BCAST_RATE,
+ CMD_ACT_MESH_GET_BCAST_RATE,
+ CMD_ACT_MESH_SET_RREQ_DELAY,
+ CMD_ACT_MESH_GET_RREQ_DELAY,
+ CMD_ACT_MESH_SET_ROUTE_EXP,
+ CMD_ACT_MESH_GET_ROUTE_EXP,
+ CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
+ CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
+};
+
+/* Define actions and types for CMD_MESH_CONFIG */
+enum cmd_mesh_config_actions {
+ CMD_ACT_MESH_CONFIG_STOP = 0,
+ CMD_ACT_MESH_CONFIG_START,
+ CMD_ACT_MESH_CONFIG_SET,
+ CMD_ACT_MESH_CONFIG_GET,
+};
+
+enum cmd_mesh_config_types {
+ CMD_TYPE_MESH_SET_BOOTFLAG = 1,
+ CMD_TYPE_MESH_SET_BOOTTIME,
+ CMD_TYPE_MESH_SET_DEF_CHANNEL,
+ CMD_TYPE_MESH_SET_MESH_IE,
+ CMD_TYPE_MESH_GET_DEFAULTS,
+ CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
};
/** Card Event definition */
-#define MACREG_INT_CODE_TX_PPA_FREE 0x00000000
-#define MACREG_INT_CODE_TX_DMA_DONE 0x00000001
-#define MACREG_INT_CODE_LINK_LOSE_W_SCAN 0x00000002
-#define MACREG_INT_CODE_LINK_LOSE_NO_SCAN 0x00000003
-#define MACREG_INT_CODE_LINK_SENSED 0x00000004
-#define MACREG_INT_CODE_CMD_FINISHED 0x00000005
-#define MACREG_INT_CODE_MIB_CHANGED 0x00000006
-#define MACREG_INT_CODE_INIT_DONE 0x00000007
-#define MACREG_INT_CODE_DEAUTHENTICATED 0x00000008
-#define MACREG_INT_CODE_DISASSOCIATED 0x00000009
-#define MACREG_INT_CODE_PS_AWAKE 0x0000000a
-#define MACREG_INT_CODE_PS_SLEEP 0x0000000b
-#define MACREG_INT_CODE_MIC_ERR_MULTICAST 0x0000000d
-#define MACREG_INT_CODE_MIC_ERR_UNICAST 0x0000000e
-#define MACREG_INT_CODE_WM_AWAKE 0x0000000f
-#define MACREG_INT_CODE_ADHOC_BCN_LOST 0x00000011
-#define MACREG_INT_CODE_RSSI_LOW 0x00000019
-#define MACREG_INT_CODE_SNR_LOW 0x0000001a
-#define MACREG_INT_CODE_MAX_FAIL 0x0000001b
-#define MACREG_INT_CODE_RSSI_HIGH 0x0000001c
-#define MACREG_INT_CODE_SNR_HIGH 0x0000001d
-
-#endif /* _HOST_H_ */
+#define MACREG_INT_CODE_TX_PPA_FREE 0
+#define MACREG_INT_CODE_TX_DMA_DONE 1
+#define MACREG_INT_CODE_LINK_LOST_W_SCAN 2
+#define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3
+#define MACREG_INT_CODE_LINK_SENSED 4
+#define MACREG_INT_CODE_CMD_FINISHED 5
+#define MACREG_INT_CODE_MIB_CHANGED 6
+#define MACREG_INT_CODE_INIT_DONE 7
+#define MACREG_INT_CODE_DEAUTHENTICATED 8
+#define MACREG_INT_CODE_DISASSOCIATED 9
+#define MACREG_INT_CODE_PS_AWAKE 10
+#define MACREG_INT_CODE_PS_SLEEP 11
+#define MACREG_INT_CODE_MIC_ERR_MULTICAST 13
+#define MACREG_INT_CODE_MIC_ERR_UNICAST 14
+#define MACREG_INT_CODE_WM_AWAKE 15
+#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16
+#define MACREG_INT_CODE_ADHOC_BCN_LOST 17
+#define MACREG_INT_CODE_HOST_AWAKE 18
+#define MACREG_INT_CODE_STOP_TX 19
+#define MACREG_INT_CODE_START_TX 20
+#define MACREG_INT_CODE_CHANNEL_SWITCH 21
+#define MACREG_INT_CODE_MEASUREMENT_RDY 22
+#define MACREG_INT_CODE_WMM_CHANGE 23
+#define MACREG_INT_CODE_BG_SCAN_REPORT 24
+#define MACREG_INT_CODE_RSSI_LOW 25
+#define MACREG_INT_CODE_SNR_LOW 26
+#define MACREG_INT_CODE_MAX_FAIL 27
+#define MACREG_INT_CODE_RSSI_HIGH 28
+#define MACREG_INT_CODE_SNR_HIGH 29
+#define MACREG_INT_CODE_MESH_AUTO_STARTED 35
+#define MACREG_INT_CODE_FIRMWARE_READY 48
+
+#endif
projects / linux-2.6-omap-h63xx.git / blobdiff