/* PCMCIA specific device information (goes in the card field of
* struct orinoco_private */
struct orinoco_pccard {
- dev_link_t link;
+ struct pcmcia_device *p_dev;
dev_node_t node;
/* Used to handle hard reset */
/* Function prototypes */
/********************************************************************/
-static void orinoco_cs_config(dev_link_t *link);
-static void orinoco_cs_release(dev_link_t *link);
+static int orinoco_cs_config(struct pcmcia_device *link);
+static void orinoco_cs_release(struct pcmcia_device *link);
static void orinoco_cs_detach(struct pcmcia_device *p_dev);
/********************************************************************/
orinoco_cs_hard_reset(struct orinoco_private *priv)
{
struct orinoco_pccard *card = priv->card;
- dev_link_t *link = &card->link;
+ struct pcmcia_device *link = card->p_dev;
int err;
/* We need atomic ops here, because we're not holding the lock */
set_bit(0, &card->hard_reset_in_progress);
- err = pcmcia_reset_card(link->handle, NULL);
+ err = pcmcia_reset_card(link, NULL);
if (err)
return err;
* configure the card at this point -- we wait until we receive a card
* insertion event. */
static int
-orinoco_cs_attach(struct pcmcia_device *p_dev)
+orinoco_cs_probe(struct pcmcia_device *link)
{
struct net_device *dev;
struct orinoco_private *priv;
struct orinoco_pccard *card;
- dev_link_t *link;
dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset);
if (! dev)
card = priv->card;
/* Link both structures together */
- link = &card->link;
+ card->p_dev = link;
link->priv = dev;
/* Interrupt setup */
link->conf.Attributes = 0;
link->conf.IntType = INT_MEMORY_AND_IO;
- /* Register with Card Services */
- link->next = NULL;
-
- link->handle = p_dev;
- p_dev->instance = link;
-
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- orinoco_cs_config(link);
-
- return 0;
+ return orinoco_cs_config(link);
} /* orinoco_cs_attach */
/*
* are freed. Otherwise, the structures will be freed when the device
* is released.
*/
-static void orinoco_cs_detach(struct pcmcia_device *p_dev)
+static void orinoco_cs_detach(struct pcmcia_device *link)
{
- dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
- if (link->state & DEV_CONFIG)
- orinoco_cs_release(link);
+ orinoco_cs_release(link);
- DEBUG(0, PFX "detach: link=%p link->dev=%p\n", link, link->dev);
- if (link->dev) {
+ DEBUG(0, PFX "detach: link=%p link->dev_node=%p\n", link, link->dev_node);
+ if (link->dev_node) {
DEBUG(0, PFX "About to unregister net device %p\n",
dev);
unregister_netdev(dev);
last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
} while (0)
-static void
-orinoco_cs_config(dev_link_t *link)
+static int
+orinoco_cs_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- client_handle_t handle = link->handle;
struct orinoco_private *priv = netdev_priv(dev);
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
cisparse_t parse;
void __iomem *mem;
- CS_CHECK(ValidateCIS, pcmcia_validate_cis(handle, &info));
+ CS_CHECK(ValidateCIS, pcmcia_validate_cis(link, &info));
/*
* This reads the card's CONFIG tuple to find its
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
tuple.TupleOffset = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
- CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
- CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
+ CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
- /* Configure card */
- link->state |= DEV_CONFIG;
-
/* Look up the current Vcc */
CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(handle, &conf));
- link->conf.Vcc = conf.Vcc;
+ pcmcia_get_configuration_info(link, &conf));
/*
* In this loop, we scan the CIS for configuration table
* implementation-defined details.
*/
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
while (1) {
cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
cistpl_cftable_entry_t dflt = { .index = 0 };
- if ( (pcmcia_get_tuple_data(handle, &tuple) != 0)
- || (pcmcia_parse_tuple(handle, &tuple, &parse) != 0))
+ if ( (pcmcia_get_tuple_data(link, &tuple) != 0)
+ || (pcmcia_parse_tuple(link, &tuple, &parse) != 0))
goto next_entry;
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link->handle, &link->io) != 0)
+ if (pcmcia_request_io(link, &link->io) != 0)
goto next_entry;
}
break;
next_entry:
- if (link->io.NumPorts1)
- pcmcia_release_io(link->handle, &link->io);
- last_ret = pcmcia_get_next_tuple(handle, &tuple);
+ pcmcia_disable_device(link);
+ last_ret = pcmcia_get_next_tuple(link, &tuple);
if (last_ret == CS_NO_MORE_ITEMS) {
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
* a handler to the interrupt, unless the 'Handler' member of
* the irq structure is initialized.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* card and host interface into "Memory and IO" mode.
*/
CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link->handle, &link->conf));
+ pcmcia_request_configuration(link, &link->conf));
/* Ok, we have the configuration, prepare to register the netdev */
dev->base_addr = link->io.BasePort1;
SET_MODULE_OWNER(dev);
card->node.major = card->node.minor = 0;
- SET_NETDEV_DEV(dev, &handle_to_dev(handle));
+ SET_NETDEV_DEV(dev, &handle_to_dev(link));
/* Tell the stack we exist */
if (register_netdev(dev) != 0) {
printk(KERN_ERR PFX "register_netdev() failed\n");
}
/* At this point, the dev_node_t structure(s) needs to be
- * initialized and arranged in a linked list at link->dev. */
+ * initialized and arranged in a linked list at link->dev_node. */
strcpy(card->node.dev_name, dev->name);
- link->dev = &card->node; /* link->dev being non-NULL is also
+ link->dev_node = &card->node; /* link->dev_node being non-NULL is also
used to indicate that the
net_device has been registered */
- link->state &= ~DEV_CONFIG_PENDING;
/* Finally, report what we've done */
- printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d",
- dev->name, link->conf.ConfigIndex,
- link->conf.Vcc / 10, link->conf.Vcc % 10);
- if (link->conf.Vpp1)
- printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
- link->conf.Vpp1 % 10);
+ printk(KERN_DEBUG "%s: index 0x%02x: ",
+ dev->name, link->conf.ConfigIndex);
+ if (link->conf.Vpp)
+ printk(", Vpp %d.%d", link->conf.Vpp / 10,
+ link->conf.Vpp % 10);
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort2 + link->io.NumPorts2 - 1);
printk("\n");
- return;
+ return 0;
cs_failed:
- cs_error(link->handle, last_fn, last_ret);
+ cs_error(link, last_fn, last_ret);
failed:
orinoco_cs_release(link);
+ return -ENODEV;
} /* orinoco_cs_config */
/*
* still open, this will be postponed until it is closed.
*/
static void
-orinoco_cs_release(dev_link_t *link)
+orinoco_cs_release(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
struct orinoco_private *priv = netdev_priv(dev);
priv->hw_unavailable++;
spin_unlock_irqrestore(&priv->lock, flags);
- /* Don't bother checking to see if these succeed or not */
- pcmcia_release_configuration(link->handle);
- if (link->io.NumPorts1)
- pcmcia_release_io(link->handle, &link->io);
- if (link->irq.AssignedIRQ)
- pcmcia_release_irq(link->handle, &link->irq);
- link->state &= ~DEV_CONFIG;
+ pcmcia_disable_device(link);
if (priv->hw.iobase)
ioport_unmap(priv->hw.iobase);
} /* orinoco_cs_release */
-static int orinoco_cs_suspend(struct pcmcia_device *p_dev)
+static int orinoco_cs_suspend(struct pcmcia_device *link)
{
- dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
struct orinoco_private *priv = netdev_priv(dev);
struct orinoco_pccard *card = priv->card;
int err = 0;
unsigned long flags;
- link->state |= DEV_SUSPEND;
- if (link->state & DEV_CONFIG) {
- /* This is probably racy, but I can't think of
- a better way, short of rewriting the PCMCIA
- layer to not suck :-( */
- if (! test_bit(0, &card->hard_reset_in_progress)) {
- spin_lock_irqsave(&priv->lock, flags);
+ /* This is probably racy, but I can't think of
+ a better way, short of rewriting the PCMCIA
+ layer to not suck :-( */
+ if (! test_bit(0, &card->hard_reset_in_progress)) {
+ spin_lock_irqsave(&priv->lock, flags);
- err = __orinoco_down(dev);
- if (err)
- printk(KERN_WARNING "%s: Error %d downing interface\n",
- dev->name, err);
+ err = __orinoco_down(dev);
+ if (err)
+ printk(KERN_WARNING "%s: Error %d downing interface\n",
+ dev->name, err);
- netif_device_detach(dev);
- priv->hw_unavailable++;
+ netif_device_detach(dev);
+ priv->hw_unavailable++;
- spin_unlock_irqrestore(&priv->lock, flags);
- }
-
- pcmcia_release_configuration(link->handle);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
return 0;
}
-static int orinoco_cs_resume(struct pcmcia_device *p_dev)
+static int orinoco_cs_resume(struct pcmcia_device *link)
{
- dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
struct orinoco_private *priv = netdev_priv(dev);
struct orinoco_pccard *card = priv->card;
int err = 0;
unsigned long flags;
- link->state &= ~DEV_SUSPEND;
- if (link->state & DEV_CONFIG) {
- /* FIXME: should we double check that this is
- * the same card as we had before */
- pcmcia_request_configuration(link->handle, &link->conf);
-
- if (! test_bit(0, &card->hard_reset_in_progress)) {
- err = orinoco_reinit_firmware(dev);
- if (err) {
- printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
- dev->name, err);
- return -EIO;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
+ if (! test_bit(0, &card->hard_reset_in_progress)) {
+ err = orinoco_reinit_firmware(dev);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
+ dev->name, err);
+ return -EIO;
+ }
- netif_device_attach(dev);
- priv->hw_unavailable--;
+ spin_lock_irqsave(&priv->lock, flags);
- if (priv->open && ! priv->hw_unavailable) {
- err = __orinoco_up(dev);
- if (err)
- printk(KERN_ERR "%s: Error %d restarting card\n",
- dev->name, err);
- }
+ netif_device_attach(dev);
+ priv->hw_unavailable--;
- spin_unlock_irqrestore(&priv->lock, flags);
+ if (priv->open && ! priv->hw_unavailable) {
+ err = __orinoco_up(dev);
+ if (err)
+ printk(KERN_ERR "%s: Error %d restarting card\n",
+ dev->name, err);
}
+
+ spin_unlock_irqrestore(&priv->lock, flags);
}
return 0;
PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
+ PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
.drv = {
.name = DRIVER_NAME,
},
- .probe = orinoco_cs_attach,
+ .probe = orinoco_cs_probe,
.remove = orinoco_cs_detach,
.id_table = orinoco_cs_ids,
.suspend = orinoco_cs_suspend,