* (wavelan modem or i82593)
*/
-#ifdef STRUCT_CHECK
-/*------------------------------------------------------------------*/
-/*
- * Sanity routine to verify the sizes of the various WaveLAN interface
- * structures.
- */
-static char *
-wv_structuct_check(void)
-{
-#define SC(t,s,n) if (sizeof(t) != s) return(n);
-
- SC(psa_t, PSA_SIZE, "psa_t");
- SC(mmw_t, MMW_SIZE, "mmw_t");
- SC(mmr_t, MMR_SIZE, "mmr_t");
-
-#undef SC
-
- return((char *) NULL);
-} /* wv_structuct_check */
-#endif /* STRUCT_CHECK */
-
/******************* MODEM MANAGEMENT SUBROUTINES *******************/
/*
* Useful subroutines to manage the modem of the wavelan
* Write to card's Host Adapter Command Register. Include a delay for
* those times when it is needed.
*/
-static inline void
+static void
hacr_write_slow(u_long base,
u_char hacr)
{
net_local *lp = netdev_priv(dev);
u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1);
int count = 0;
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
/* As there seem to have no flag PSA_BUSY as in the ISA model, we are
* oblige to verify this address to know when the PSA is ready... */
volatile u_char __iomem *verify = lp->mem + PSA_ADDR +
/*
* Write 1 byte to the MMC.
*/
-static inline void
+static void
mmc_out(u_long base,
u_short o,
u_char d)
* Routine to write bytes to the Modem Management Controller.
* We start by the end because it is the way it should be !
*/
-static inline void
+static void
mmc_write(u_long base,
u_char o,
u_char * b,
* Read 1 byte from the MMC.
* Optimised version for 1 byte, avoid using memory...
*/
-static inline u_char
+static u_char
mmc_in(u_long base,
u_short o)
{
* (code has just been moved in the above function)
* We start by the end because it is the way it should be !
*/
-static inline void
+static void
mmc_read(u_long base,
u_char o,
u_char * b,
/*------------------------------------------------------------------*/
/*
* Wait for the frequency EEprom to complete a command...
- * I hope this one will be optimally inlined...
*/
-static inline void
+static void
fee_wait(u_long base, /* i/o port of the card */
int delay, /* Base delay to wait for */
int number) /* Number of time to wait */
/* Perform a handover to a new WavePoint */
static void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp)
{
- kio_addr_t base = lp->dev->base_addr;
+ unsigned int base = lp->dev->base_addr;
mm_t m;
unsigned long flags;
}
/* Called when a WavePoint beacon is received */
-static inline void wl_roam_gather(struct net_device * dev,
- u_char * hdr, /* Beacon header */
- u_char * stats) /* SNR, Signal quality
+static void wl_roam_gather(struct net_device * dev,
+ u_char * hdr, /* Beacon header */
+ u_char * stats) /* SNR, Signal quality
of packet */
{
wavepoint_beacon *beacon= (wavepoint_beacon *)hdr; /* Rcvd. Beacon */
static inline int WAVELAN_BEACON(unsigned char *data)
{
wavepoint_beacon *beacon= (wavepoint_beacon *)data;
- static wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00};
+ static const wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00};
if(memcmp(beacon,&beacon_template,9)==0)
return 1;
int cmd,
int result)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
int status;
int wait_completed;
long spin;
char * buf,
int len)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
int ring_ptr = addr;
int chunk_len;
char * buf_ptr = buf;
* wavelan_interrupt is not an option...), so you may experience
* some delay sometime...
*/
-static inline void
+static void
wv_82593_reconfig(struct net_device * dev)
{
net_local * lp = netdev_priv(dev);
static void
wv_mmc_show(struct net_device * dev)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
net_local * lp = netdev_priv(dev);
mmr_t m;
/*
* Dump packet header (and content if necessary) on the screen
*/
-static inline void
+static void
wv_packet_info(u_char * p, /* Packet to dump */
int length, /* Length of the packet */
char * msg1, /* Name of the device */
* This is the information which is displayed by the driver at startup
* There is a lot of flag to configure it at your will...
*/
-static inline void
+static void
wv_init_info(struct net_device * dev)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
psa_t psa;
DECLARE_MAC_BUF(mac);
#ifdef DEBUG_BASIC_SHOW
/* Now, let's go for the basic stuff */
- printk(KERN_NOTICE "%s: WaveLAN: port %#lx, irq %d, "
+ printk(KERN_NOTICE "%s: WaveLAN: port %#x, irq %d, "
"hw_addr %s",
dev->name, base, dev->irq,
print_mac(mac, dev->dev_addr));
* Frequency setting (for hardware able of it)
* It's a bit complicated and you don't really want to look into it...
*/
-static inline int
+static int
wv_set_frequency(u_long base, /* i/o port of the card */
iw_freq * frequency)
{
/*
* Give the list of available frequencies
*/
-static inline int
+static int
wv_frequency_list(u_long base, /* i/o port of the card */
iw_freq * list, /* List of frequency to fill */
int max) /* Maximum number of frequencies */
union iwreq_data *wrqu,
char *extra)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
psa_t psa;
mm_t m;
union iwreq_data *wrqu,
char *extra)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
unsigned long flags;
int ret;
union iwreq_data *wrqu,
char *extra)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
psa_t psa;
unsigned long flags;
union iwreq_data *wrqu,
char *extra)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
psa_t psa;
unsigned long flags;
union iwreq_data *wrqu,
char *extra)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
unsigned long flags;
psa_t psa;
union iwreq_data *wrqu,
char *extra)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
psa_t psa;
unsigned long flags;
union iwreq_data *wrqu,
char *extra)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
struct iw_range *range = (struct iw_range *) extra;
unsigned long flags;
union iwreq_data *wrqu,
char *extra)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
psa_t psa;
unsigned long flags;
static iw_stats *
wavelan_get_wireless_stats(struct net_device * dev)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
net_local * lp = netdev_priv(dev);
mmr_t m;
iw_stats * wstats;
* frame pointer and verify that the frame seem correct
* (called by wv_packet_rcv())
*/
-static inline int
+static int
wv_start_of_frame(struct net_device * dev,
int rfp, /* end of frame */
int wrap) /* start of buffer */
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
int rp;
int len;
* Note: if any errors occur, the packet is "dropped on the floor"
* (called by wv_packet_rcv())
*/
-static inline void
+static void
wv_packet_read(struct net_device * dev,
int fd_p,
int sksize)
* (called by wavelan_interrupt())
* Note : the spinlock is already grabbed for us and irq are disabled.
*/
-static inline void
+static void
wv_packet_rcv(struct net_device * dev)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
net_local * lp = netdev_priv(dev);
int newrfp;
int rp;
* the transmit.
* (called in wavelan_packet_xmit())
*/
-static inline void
+static void
wv_packet_write(struct net_device * dev,
void * buf,
short length)
{
net_local * lp = netdev_priv(dev);
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
unsigned long flags;
int clen = length;
register u_short xmtdata_base = TX_BASE;
* Routine to initialize the Modem Management Controller.
* (called by wv_hw_config())
*/
-static inline int
+static int
wv_mmc_init(struct net_device * dev)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
psa_t psa;
mmw_t m;
int configured;
* non-NCR/AT&T/Lucent PCMCIA cards, see wavelan_cs.h for detail on
* how to configure your card...
*/
- for(i = 0; i < (sizeof(MAC_ADDRESSES) / sizeof(char) / 3); i++)
- if((psa.psa_univ_mac_addr[0] == MAC_ADDRESSES[i][0]) &&
- (psa.psa_univ_mac_addr[1] == MAC_ADDRESSES[i][1]) &&
- (psa.psa_univ_mac_addr[2] == MAC_ADDRESSES[i][2]))
+ for (i = 0; i < ARRAY_SIZE(MAC_ADDRESSES); i++)
+ if ((psa.psa_univ_mac_addr[0] == MAC_ADDRESSES[i][0]) &&
+ (psa.psa_univ_mac_addr[1] == MAC_ADDRESSES[i][1]) &&
+ (psa.psa_univ_mac_addr[2] == MAC_ADDRESSES[i][2]))
break;
/* If we have not found it... */
- if(i == (sizeof(MAC_ADDRESSES) / sizeof(char) / 3))
+ if (i == ARRAY_SIZE(MAC_ADDRESSES))
{
#ifdef DEBUG_CONFIG_ERRORS
printk(KERN_WARNING "%s: wv_mmc_init(): Invalid MAC address: %02X:%02X:%02X:...\n",
static int
wv_ru_stop(struct net_device * dev)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
net_local * lp = netdev_priv(dev);
unsigned long flags;
int status;
static int
wv_ru_start(struct net_device * dev)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
net_local * lp = netdev_priv(dev);
unsigned long flags;
static int
wv_82593_config(struct net_device * dev)
{
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
net_local * lp = netdev_priv(dev);
struct i82593_conf_block cfblk;
int ret = TRUE;
* wavelan.
* (called by wv_config())
*/
-static inline int
+static int
wv_pcmcia_reset(struct net_device * dev)
{
int i;
wv_hw_config(struct net_device * dev)
{
net_local * lp = netdev_priv(dev);
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
unsigned long flags;
int ret = FALSE;
printk(KERN_DEBUG "%s: ->wv_hw_config()\n", dev->name);
#endif
-#ifdef STRUCT_CHECK
- if(wv_structuct_check() != (char *) NULL)
- {
- printk(KERN_WARNING "%s: wv_hw_config: structure/compiler botch: \"%s\"\n",
- dev->name, wv_structuct_check());
- return FALSE;
- }
-#endif /* STRUCT_CHECK == 1 */
+ /* compile-time check the sizes of structures */
+ BUILD_BUG_ON(sizeof(psa_t) != PSA_SIZE);
+ BUILD_BUG_ON(sizeof(mmw_t) != MMW_SIZE);
+ BUILD_BUG_ON(sizeof(mmr_t) != MMR_SIZE);
/* Reset the pcmcia interface */
if(wv_pcmcia_reset(dev) == FALSE)
* 2. Start the LAN controller's receive unit
* (called by wavelan_event(), wavelan_watchdog() and wavelan_open())
*/
-static inline void
+static void
wv_hw_reset(struct net_device * dev)
{
net_local * lp = netdev_priv(dev);
* device available to the system.
* (called by wavelan_event())
*/
-static inline int
+static int
wv_pcmcia_config(struct pcmcia_device * link)
{
struct net_device * dev = (struct net_device *) link->priv;
{
struct net_device * dev = dev_id;
net_local * lp;
- kio_addr_t base;
+ unsigned int base;
int status0;
u_int tx_status;
wavelan_watchdog(struct net_device * dev)
{
net_local * lp = netdev_priv(dev);
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
unsigned long flags;
int aborted = FALSE;
{
net_local * lp = netdev_priv(dev);
struct pcmcia_device * link = lp->link;
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "%s: ->wavelan_open(dev=0x%x)\n", dev->name,
wavelan_close(struct net_device * dev)
{
struct pcmcia_device * link = ((net_local *)netdev_priv(dev))->link;
- kio_addr_t base = dev->base_addr;
+ unsigned int base = dev->base_addr;
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "%s: ->wavelan_close(dev=0x%x)\n", dev->name,
projects / linux-2.6-omap-h63xx.git / blobdiff