* @dev: instance of PCI owned by the driver that's asking
* @mask: number of address bits this PCI device can handle
*
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
*/
static int sba_dma_supported( struct device *dev, u64 mask)
{
return(0);
}
- /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first,
- * then fall back to 32-bit if that fails.
+ /* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit
+ * first, then fall back to 32-bit if that fails.
* We are just "encouraging" 32-bit DMA masks here since we can
* never allow IOMMU bypass unless we add special support for ZX1.
*/
* @size: number of bytes to map in driver buffer.
* @direction: R/W or both.
*
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
*/
static dma_addr_t
sba_map_single(struct device *dev, void *addr, size_t size,
* @size: number of bytes mapped in driver buffer.
* @direction: R/W or both.
*
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
*/
static void
sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
* @size: number of bytes mapped in driver buffer.
* @dma_handle: IOVA of new buffer.
*
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
*/
static void *sba_alloc_consistent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
* @vaddr: virtual address IOVA of "consistent" buffer.
* @dma_handler: IO virtual address of "consistent" buffer.
*
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
*/
static void
sba_free_consistent(struct device *hwdev, size_t size, void *vaddr,
* @nents: number of entries in list
* @direction: R/W or both.
*
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
*/
static int
sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
* @nents: number of entries in list
* @direction: R/W or both.
*
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
*/
static void
sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,
return (void *) pdir_base;
}
-static struct device *next_device(struct klist_iter *i)
+struct ibase_data_struct {
+ struct ioc *ioc;
+ int ioc_num;
+};
+
+static int setup_ibase_imask_callback(struct device *dev, void *data)
{
- struct klist_node * n = klist_next(i);
- return n ? container_of(n, struct device, knode_parent) : NULL;
+ /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
+ extern void lba_set_iregs(struct parisc_device *, u32, u32);
+ struct parisc_device *lba = to_parisc_device(dev);
+ struct ibase_data_struct *ibd = data;
+ int rope_num = (lba->hpa.start >> 13) & 0xf;
+ if (rope_num >> 3 == ibd->ioc_num)
+ lba_set_iregs(lba, ibd->ioc->ibase, ibd->ioc->imask);
+ return 0;
}
/* setup Mercury or Elroy IBASE/IMASK registers. */
static void
setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
{
- /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
- extern void lba_set_iregs(struct parisc_device *, u32, u32);
- struct device *dev;
- struct klist_iter i;
-
- klist_iter_init(&sba->dev.klist_children, &i);
- while ((dev = next_device(&i))) {
- struct parisc_device *lba = to_parisc_device(dev);
- int rope_num = (lba->hpa.start >> 13) & 0xf;
- if (rope_num >> 3 == ioc_num)
- lba_set_iregs(lba, ioc->ibase, ioc->imask);
- }
- klist_iter_exit(&i);
+ struct ibase_data_struct ibase_data = {
+ .ioc = ioc,
+ .ioc_num = ioc_num,
+ };
+
+ device_for_each_child(&sba->dev, &ibase_data,
+ setup_ibase_imask_callback);
+}
+
+#ifdef SBA_AGP_SUPPORT
+static int
+sba_ioc_find_quicksilver(struct device *dev, void *data)
+{
+ int *agp_found = data;
+ struct parisc_device *lba = to_parisc_device(dev);
+
+ if (IS_QUICKSILVER(lba))
+ *agp_found = 1;
+ return 0;
}
+#endif
static void
sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM);
#ifdef SBA_AGP_SUPPORT
-{
- struct klist_iter i;
- struct device *dev = NULL;
/*
** If an AGP device is present, only use half of the IOV space
** We program the next pdir index after we stop w/ a key for
** the GART code to handshake on.
*/
- klist_iter_init(&sba->dev.klist_children, &i);
- while ((dev = next_device(&i))) {
- struct parisc_device *lba = to_parisc_device(dev);
- if (IS_QUICKSILVER(lba))
- agp_found = 1;
- }
- klist_iter_exit(&i);
+ device_for_each_child(&sba->dev, &agp_found, sba_ioc_find_quicksilver);
if (agp_found && sba_reserve_agpgart) {
printk(KERN_INFO "%s: reserving %dMb of IOVA space for agpgart\n",
ioc->pdir_size /= 2;
ioc->pdir_base[PDIR_INDEX(iova_space_size/2)] = SBA_AGPGART_COOKIE;
}
-}
#endif /*SBA_AGP_SUPPORT*/
-
}
static void
projects / linux-2.6-omap-h63xx.git / blobdiff