net: Print the module name as part of the watchdog message

[linux-2.6-omap-h63xx.git] / drivers / pcmcia / pxa2xx_lubbock.c

diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index a92f11143c433df11b7f14f51ef9e39d3bd0c360..881ec8a8e3896bf969213bcc9433d4b9b9a95e3a 100644 (file)
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -16,7 +16,6 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/sched.h>
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/init.h>
@@ -30,35 +29,6 @@
 
 #include "sa1111_generic.h"
 
-static int
-lubbock_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-       /*
-        * Setup default state of GPIO outputs
-        * before we enable them as outputs.
-        */
-       GPSR(GPIO48_nPOE) =
-               GPIO_bit(GPIO48_nPOE) |
-               GPIO_bit(GPIO49_nPWE) |
-               GPIO_bit(GPIO50_nPIOR) |
-               GPIO_bit(GPIO51_nPIOW) |
-               GPIO_bit(GPIO52_nPCE_1) |
-               GPIO_bit(GPIO53_nPCE_2);
-
-       pxa_gpio_mode(GPIO48_nPOE_MD);
-       pxa_gpio_mode(GPIO49_nPWE_MD);
-       pxa_gpio_mode(GPIO50_nPIOR_MD);
-       pxa_gpio_mode(GPIO51_nPIOW_MD);
-       pxa_gpio_mode(GPIO52_nPCE_1_MD);
-       pxa_gpio_mode(GPIO53_nPCE_2_MD);
-       pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-       pxa_gpio_mode(GPIO55_nPREG_MD);
-       pxa_gpio_mode(GPIO56_nPWAIT_MD);
-       pxa_gpio_mode(GPIO57_nIOIS16_MD);
-
-       return sa1111_pcmcia_hw_init(skt);
-}
-
 static int
 lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
                                const socket_state_t *state)
@@ -117,7 +87,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
                default:
                        printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-                              __FUNCTION__, state->Vcc);
+                              __func__, state->Vcc);
                        ret = -1;
                }
 
@@ -134,7 +104,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
                                pa_dwr_set |= GPIO_A0;
                        else {
                                printk(KERN_ERR "%s(): unrecognized Vpp %u\n",
-                                      __FUNCTION__, state->Vpp);
+                                      __func__, state->Vpp);
                                ret = -1;
                                break;
                        }
@@ -158,14 +128,14 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
                default:
                        printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-                              __FUNCTION__, state->Vcc);
+                              __func__, state->Vcc);
                        ret = -1;
                        break;
                }
 
                if (state->Vpp != state->Vcc && state->Vpp != 0) {
                        printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n",
-                              __FUNCTION__, state->Vpp);
+                              __func__, state->Vpp);
                        ret = -1;
                        break;
                }
@@ -231,7 +201,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
 static struct pcmcia_low_level lubbock_pcmcia_ops = {
        .owner                  = THIS_MODULE,
-       .hw_init                = lubbock_pcmcia_hw_init,
+       .hw_init                = sa1111_pcmcia_hw_init,
        .hw_shutdown            = sa1111_pcmcia_hw_shutdown,
        .socket_state           = sa1111_pcmcia_socket_state,
        .configure_socket       = lubbock_pcmcia_configure_socket,
@@ -243,7 +213,7 @@ static struct pcmcia_low_level lubbock_pcmcia_ops = {
 
 #include "pxa2xx_base.h"
 
-int __init pcmcia_lubbock_init(struct sa1111_dev *sadev)
+int pcmcia_lubbock_init(struct sa1111_dev *sadev)
 {
        int ret = -ENODEV;