#include <linux/rtc.h>
#include <linux/delay.h>
-#define DRV_VERSION "1.0.7"
-
-/* Addresses to scan: none. This chip is located at
- * 0x6f and uses a two bytes register addressing.
- * Two bytes need to be written to read a single register,
- * while most other chips just require one and take the second
- * one as the data to be written. To prevent corrupting
- * unknown chips, the user must explicitly set the probe parameter.
- */
-
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD;
+#define DRV_VERSION "1.0.8"
/* offsets into CCR area */
#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
-/* Prototypes */
-static int x1205_attach(struct i2c_adapter *adapter);
-static int x1205_detach(struct i2c_client *client);
-static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
-
-static struct i2c_driver x1205_driver = {
- .driver = {
- .name = "x1205",
- },
- .id = I2C_DRIVERID_X1205,
- .attach_adapter = &x1205_attach,
- .detach_client = &x1205_detach,
-};
+static struct i2c_driver x1205_driver;
/*
* In the routines that deal directly with the x1205 hardware, we use
/* read date registers */
if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
dev_dbg(&client->dev,
"%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
"mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
- __FUNCTION__,
+ __func__,
buf[0], buf[1], buf[2], buf[3],
buf[4], buf[5], buf[6], buf[7]);
dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
- __FUNCTION__,
+ __func__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
/* read status register */
if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
dev_dbg(&client->dev,
"%s: secs=%d, mins=%d, hours=%d\n",
- __FUNCTION__,
+ __func__,
tm->tm_sec, tm->tm_min, tm->tm_hour);
buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
if (datetoo) {
dev_dbg(&client->dev,
"%s: mday=%d, mon=%d, year=%d, wday=%d\n",
- __FUNCTION__,
+ __func__,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
/* this sequence is required to unlock the chip */
if ((xfer = i2c_master_send(client, wel, 3)) != 3) {
- dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
+ dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer);
return -EIO;
}
if ((xfer = i2c_master_send(client, rwel, 3)) != 3) {
- dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
+ dev_err(&client->dev, "%s: rwel - %d\n", __func__, xfer);
return -EIO;
}
if (xfer != 3) {
dev_err(&client->dev,
"%s: xfer=%d addr=%02x, data=%02x\n",
- __FUNCTION__,
+ __func__,
xfer, rdata[1], rdata[2]);
return -EIO;
}
/* disable further writes */
if ((xfer = i2c_master_send(client, diswe, 3)) != 3) {
- dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
+ dev_err(&client->dev, "%s: diswe - %d\n", __func__, xfer);
return -EIO;
}
/* read dtr register */
if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
- dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
+ dev_dbg(&client->dev, "%s: raw dtr=%x\n", __func__, dtr);
*trim = 0;
/* read atr register */
if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
- dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
+ dev_dbg(&client->dev, "%s: raw atr=%x\n", __func__, atr);
/* atr is a two's complement value on 6 bits,
* perform sign extension. The formula is
if (atr & 0x20)
atr |= 0xC0;
- dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
+ dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __func__, atr, atr);
*trim = (atr * 250) + 11000;
- dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
+ dev_dbg(&client->dev, "%s: real=%d\n", __func__, *trim);
return 0;
}
if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
dev_err(&client->dev,
"%s: could not read register %x\n",
- __FUNCTION__, probe_zero_pattern[i]);
+ __func__, probe_zero_pattern[i]);
return -EIO;
}
if ((buf & probe_zero_pattern[i+1]) != 0) {
dev_err(&client->dev,
"%s: register=%02x, zero pattern=%d, value=%x\n",
- __FUNCTION__, probe_zero_pattern[i], i, buf);
+ __func__, probe_zero_pattern[i], i, buf);
return -ENODEV;
}
if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
dev_err(&client->dev,
"%s: could not read register %x\n",
- __FUNCTION__, probe_limits_pattern[i].reg);
+ __func__, probe_limits_pattern[i].reg);
return -EIO;
}
value < probe_limits_pattern[i].min) {
dev_dbg(&client->dev,
"%s: register=%x, lim pattern=%d, value=%d\n",
- __FUNCTION__, probe_limits_pattern[i].reg,
+ __func__, probe_limits_pattern[i].reg,
i, value);
return -ENODEV;
}
static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
-static int x1205_attach(struct i2c_adapter *adapter)
+static int x1205_sysfs_register(struct device *dev)
{
- return i2c_probe(adapter, &addr_data, x1205_probe);
+ int err;
+
+ err = device_create_file(dev, &dev_attr_atrim);
+ if (err)
+ return err;
+
+ err = device_create_file(dev, &dev_attr_dtrim);
+ if (err)
+ device_remove_file(dev, &dev_attr_atrim);
+
+ return err;
}
-static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
+static void x1205_sysfs_unregister(struct device *dev)
+{
+ device_remove_file(dev, &dev_attr_atrim);
+ device_remove_file(dev, &dev_attr_dtrim);
+}
+
+
+static int x1205_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
int err = 0;
unsigned char sr;
- struct i2c_client *client;
struct rtc_device *rtc;
- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
- err = -ENODEV;
- goto exit;
- }
-
- if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- /* I2C client */
- client->addr = address;
- client->driver = &x1205_driver;
- client->adapter = adapter;
-
- strlcpy(client->name, x1205_driver.driver.name, I2C_NAME_SIZE);
+ dev_dbg(&client->dev, "%s\n", __func__);
- /* Verify the chip is really an X1205 */
- if (kind < 0) {
- if (x1205_validate_client(client) < 0) {
- err = -ENODEV;
- goto exit_kfree;
- }
- }
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ return -ENODEV;
- /* Inform the i2c layer */
- if ((err = i2c_attach_client(client)))
- goto exit_kfree;
+ if (x1205_validate_client(client) < 0)
+ return -ENODEV;
dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
rtc = rtc_device_register(x1205_driver.driver.name, &client->dev,
&x1205_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc)) {
- err = PTR_ERR(rtc);
- goto exit_detach;
- }
+ if (IS_ERR(rtc))
+ return PTR_ERR(rtc);
i2c_set_clientdata(client, rtc);
else
dev_err(&client->dev, "couldn't read status\n");
- err = device_create_file(&client->dev, &dev_attr_atrim);
- if (err) goto exit_devreg;
- err = device_create_file(&client->dev, &dev_attr_dtrim);
- if (err) goto exit_atrim;
+ err = x1205_sysfs_register(&client->dev);
+ if (err)
+ goto exit_devreg;
return 0;
-exit_atrim:
- device_remove_file(&client->dev, &dev_attr_atrim);
-
exit_devreg:
rtc_device_unregister(rtc);
-exit_detach:
- i2c_detach_client(client);
-
-exit_kfree:
- kfree(client);
-
-exit:
return err;
}
-static int x1205_detach(struct i2c_client *client)
+static int x1205_remove(struct i2c_client *client)
{
- int err;
struct rtc_device *rtc = i2c_get_clientdata(client);
- if (rtc)
- rtc_device_unregister(rtc);
-
- if ((err = i2c_detach_client(client)))
- return err;
-
- kfree(client);
-
+ rtc_device_unregister(rtc);
+ x1205_sysfs_unregister(&client->dev);
return 0;
}
+static const struct i2c_device_id x1205_id[] = {
+ { "x1205", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, x1205_id);
+
+static struct i2c_driver x1205_driver = {
+ .driver = {
+ .name = "rtc-x1205",
+ },
+ .probe = x1205_probe,
+ .remove = x1205_remove,
+ .id_table = x1205_id,
+};
+
static int __init x1205_init(void)
{
return i2c_add_driver(&x1205_driver);
projects / linux-2.6-omap-h63xx.git / blobdiff