/*
*
- * linux/drivers/s390/net/qeth_fs.c ($Revision: 1.16 $)
+ * linux/drivers/s390/net/qeth_fs.c
*
* Linux on zSeries OSA Express and HiperSockets support
* This file contains code related to procfs.
#include "qeth_mpc.h"
#include "qeth_fs.h"
-const char *VERSION_QETH_PROC_C = "$Revision: 1.16 $";
-
/***** /proc/qeth *****/
#define QETH_PROCFILE_NAME "qeth"
static struct proc_dir_entry *qeth_procfile;
{
struct device *dev = NULL;
loff_t nr = 0;
-
+
down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
if (*offset == 0)
return SEQ_START_TOKEN;
qeth_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset)
{
struct device *prev, *next;
-
- if (it == SEQ_START_TOKEN)
+
+ if (it == SEQ_START_TOKEN)
prev = NULL;
else
prev = (struct device *) it;
static inline const char *
qeth_get_router_str(struct qeth_card *card, int ipv)
{
- int routing_type = 0;
+ enum qeth_routing_types routing_type = NO_ROUTER;
if (ipv == 4) {
routing_type = card->options.route4.type;
#endif /* CONFIG_QETH_IPV6 */
}
- if (routing_type == PRIMARY_ROUTER)
+ switch (routing_type){
+ case PRIMARY_ROUTER:
return "pri";
- else if (routing_type == SECONDARY_ROUTER)
+ case SECONDARY_ROUTER:
return "sec";
- else if (routing_type == MULTICAST_ROUTER) {
+ case MULTICAST_ROUTER:
if (card->info.broadcast_capable == QETH_BROADCAST_WITHOUT_ECHO)
return "mc+";
return "mc";
- } else if (routing_type == PRIMARY_CONNECTOR) {
+ case PRIMARY_CONNECTOR:
if (card->info.broadcast_capable == QETH_BROADCAST_WITHOUT_ECHO)
return "p+c";
return "p.c";
- } else if (routing_type == SECONDARY_CONNECTOR) {
+ case SECONDARY_CONNECTOR:
if (card->info.broadcast_capable == QETH_BROADCAST_WITHOUT_ECHO)
return "s+c";
return "s.c";
- } else if (routing_type == NO_ROUTER)
+ default: /* NO_ROUTER */
return "no";
- else
- return "unk";
+ }
}
static int
struct device *device;
struct qeth_card *card;
-
+
if (it == SEQ_START_TOKEN)
return 0;
CARD_DDEV_ID(card),
QETH_CARD_IFNAME(card)
);
- seq_printf(s, " Skb's/buffers received : %li/%i\n"
- " Skb's/buffers sent : %li/%i\n\n",
+ seq_printf(s, " Skb's/buffers received : %lu/%u\n"
+ " Skb's/buffers sent : %lu/%u\n\n",
card->stats.rx_packets, card->perf_stats.bufs_rec,
card->stats.tx_packets, card->perf_stats.bufs_sent
);
- seq_printf(s, " Skb's/buffers sent without packing : %li/%i\n"
- " Skb's/buffers sent with packing : %i/%i\n\n",
+ seq_printf(s, " Skb's/buffers sent without packing : %lu/%u\n"
+ " Skb's/buffers sent with packing : %u/%u\n\n",
card->stats.tx_packets - card->perf_stats.skbs_sent_pack,
card->perf_stats.bufs_sent - card->perf_stats.bufs_sent_pack,
card->perf_stats.skbs_sent_pack,
card->perf_stats.bufs_sent_pack
);
- seq_printf(s, " Skbs sent in SG mode : %i\n"
- " Skb fragments sent in SG mode : %i\n\n",
+ seq_printf(s, " Skbs sent in SG mode : %u\n"
+ " Skb fragments sent in SG mode : %u\n\n",
card->perf_stats.sg_skbs_sent,
card->perf_stats.sg_frags_sent);
- seq_printf(s, " large_send tx (in Kbytes) : %i\n"
- " large_send count : %i\n\n",
+ seq_printf(s, " large_send tx (in Kbytes) : %u\n"
+ " large_send count : %u\n\n",
card->perf_stats.large_send_bytes >> 10,
card->perf_stats.large_send_cnt);
- seq_printf(s, " Packing state changes no pkg.->packing : %i/%i\n"
+ seq_printf(s, " Packing state changes no pkg.->packing : %u/%u\n"
" Watermarks L/H : %i/%i\n"
" Current buffer usage (outbound q's) : "
"%i/%i/%i/%i\n\n",
atomic_read(&card->qdio.out_qs[3]->used_buffers)
: 0
);
- seq_printf(s, " Inbound handler time (in us) : %i\n"
- " Inbound handler count : %i\n"
- " Inbound do_QDIO time (in us) : %i\n"
- " Inbound do_QDIO count : %i\n\n"
- " Outbound handler time (in us) : %i\n"
- " Outbound handler count : %i\n\n"
- " Outbound time (in us, incl QDIO) : %i\n"
- " Outbound count : %i\n"
- " Outbound do_QDIO time (in us) : %i\n"
- " Outbound do_QDIO count : %i\n\n",
+ seq_printf(s, " Inbound handler time (in us) : %u\n"
+ " Inbound handler count : %u\n"
+ " Inbound do_QDIO time (in us) : %u\n"
+ " Inbound do_QDIO count : %u\n\n"
+ " Outbound handler time (in us) : %u\n"
+ " Outbound handler count : %u\n\n"
+ " Outbound time (in us, incl QDIO) : %u\n"
+ " Outbound count : %u\n"
+ " Outbound do_QDIO time (in us) : %u\n"
+ " Outbound do_QDIO count : %u\n\n",
card->perf_stats.inbound_time,
card->perf_stats.inbound_cnt,
card->perf_stats.inbound_do_qdio_time,