Remove un-needed eh_abort handler.
Add support for embedded firmware error strings.
2.26.02.003 - Correctly handle single sgl's with use_sg=1.
+ 2.26.02.004 - Add support for 9550SX controllers.
+ 2.26.02.005 - Fix use_sg == 0 mapping on systems with 4GB or higher.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/time.h>
+#include <linux/mutex.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include "3w-9xxx.h"
/* Globals */
-#define TW_DRIVER_VERSION "2.26.02.003"
+#define TW_DRIVER_VERSION "2.26.02.005"
static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
static unsigned int twa_device_extension_count;
static int twa_major = -1;
void __user *argp = (void __user *)arg;
/* Only let one of these through at a time */
- if (down_interruptible(&tw_dev->ioctl_sem)) {
+ if (mutex_lock_interruptible(&tw_dev->ioctl_lock)) {
retval = TW_IOCTL_ERROR_OS_EINTR;
goto out;
}
/* Now free ioctl buf memory */
dma_free_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, cpu_addr, dma_handle);
out2:
- up(&tw_dev->ioctl_sem);
+ mutex_unlock(&tw_dev->ioctl_lock);
out:
return retval;
} /* End twa_chrdev_ioctl() */
writel(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
}
- if (status_reg_value & TW_STATUS_SBUF_WRITE_ERROR) {
- TW_PRINTK(tw_dev->host, TW_DRIVER, 0xf, "SBUF Write Error: clearing");
- writel(TW_CONTROL_CLEAR_SBUF_WRITE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
- }
-
if (status_reg_value & TW_STATUS_MICROCONTROLLER_ERROR) {
if (tw_dev->reset_print == 0) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Microcontroller Error: clearing");
return retval;
} /* End twa_empty_response_queue() */
+/* This function will clear the pchip/response queue on 9550SX */
+static int twa_empty_response_queue_large(TW_Device_Extension *tw_dev)
+{
+ u32 status_reg_value, response_que_value;
+ int count = 0, retval = 1;
+
+ if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9550SX) {
+ status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev));
+
+ while (((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) && (count < TW_MAX_RESPONSE_DRAIN)) {
+ response_que_value = readl(TW_RESPONSE_QUEUE_REG_ADDR_LARGE(tw_dev));
+ if ((response_que_value & TW_9550SX_DRAIN_COMPLETED) == TW_9550SX_DRAIN_COMPLETED) {
+ /* P-chip settle time */
+ msleep(500);
+ retval = 0;
+ goto out;
+ }
+ status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev));
+ count++;
+ }
+ if (count == TW_MAX_RESPONSE_DRAIN)
+ goto out;
+
+ retval = 0;
+ } else
+ retval = 0;
+out:
+ return retval;
+} /* End twa_empty_response_queue_large() */
+
/* This function passes sense keys from firmware to scsi layer */
static int twa_fill_sense(TW_Device_Extension *tw_dev, int request_id, int copy_sense, int print_host)
{
tw_dev->generic_buffer_virt[0],
tw_dev->generic_buffer_phys[0]);
- if (tw_dev->event_queue[0])
- kfree(tw_dev->event_queue[0]);
+ kfree(tw_dev->event_queue[0]);
} /* End twa_free_device_extension() */
/* This function will free a request id */
tw_dev->error_sequence_id = 1;
tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
- init_MUTEX(&tw_dev->ioctl_sem);
+ mutex_init(&tw_dev->ioctl_lock);
init_waitqueue_head(&tw_dev->ioctl_wqueue);
retval = 0;
dma_addr_t mapping;
struct scsi_cmnd *cmd = tw_dev->srb[request_id];
struct pci_dev *pdev = tw_dev->tw_pci_dev;
- int retval = 0;
+ dma_addr_t retval = 0;
if (cmd->request_bufflen == 0) {
retval = 0;
int tries = 0, retval = 1, flashed = 0, do_soft_reset = soft_reset;
while (tries < TW_MAX_RESET_TRIES) {
- if (do_soft_reset)
+ if (do_soft_reset) {
TW_SOFT_RESET(tw_dev);
+ /* Clear pchip/response queue on 9550SX */
+ if (twa_empty_response_queue_large(tw_dev)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x36, "Response queue (large) empty failed during reset sequence");
+ do_soft_reset = 1;
+ tries++;
+ continue;
+ }
+ }
/* Make sure controller is in a good state */
if (twa_poll_status(tw_dev, TW_STATUS_MICROCONTROLLER_READY | (do_soft_reset == 1 ? TW_STATUS_ATTENTION_INTERRUPT : 0), 60)) {
tw_dev->num_resets++;
- printk(KERN_WARNING "3w-9xxx: scsi%d: WARNING: (0x%02X:0x%04X): Unit #%d: Command (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, TW_DRIVER, 0x2c, SCpnt->device->id, SCpnt->cmnd[0]);
+ sdev_printk(KERN_WARNING, SCpnt->device,
+ "WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n",
+ TW_DRIVER, 0x2c, SCpnt->cmnd[0]);
/* Now reset the card and some of the device extension data */
if (twa_reset_device_extension(tw_dev, 0)) {
int i, sg_count;
struct scsi_cmnd *srb = NULL;
struct scatterlist *sglist = NULL;
- u32 buffaddr = 0x0;
+ dma_addr_t buffaddr = 0x0;
int retval = 1;
if (tw_dev->srb[request_id]) {
goto out_free_device_extension;
}
- mem_addr = pci_resource_start(pdev, 1);
+ if (pdev->device == PCI_DEVICE_ID_3WARE_9000)
+ mem_addr = pci_resource_start(pdev, 1);
+ else
+ mem_addr = pci_resource_start(pdev, 2);
/* Save base address */
tw_dev->base_addr = ioremap(mem_addr, PAGE_SIZE);
static struct pci_device_id twa_pci_tbl[] __devinitdata = {
{ PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9000,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9550SX,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ }
};
MODULE_DEVICE_TABLE(pci, twa_pci_tbl);
projects / linux-2.6-omap-h63xx.git / blobdiff