config SCSI
tristate "SCSI device support"
depends on BLOCK
+ select SCSI_DMA if HAS_DMA
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
However, do not compile this as a module if your root file system
(the one containing the directory /) is located on a SCSI device.
+config SCSI_DMA
+ bool
+ default n
+
config SCSI_TGT
tristate "SCSI target support"
depends on SCSI && EXPERIMENTAL
each attached FiberChannel device to sysfs, say Y.
Otherwise, say N.
+config SCSI_FC_TGT_ATTRS
+ bool "SCSI target support for FiberChannel Transport Attributes"
+ depends on SCSI_FC_ATTRS
+ depends on SCSI_TGT = y || SCSI_TGT = SCSI_FC_ATTRS
+ help
+ If you want to use SCSI target mode drivers enable this option.
+
config SCSI_ISCSI_ATTRS
tristate "iSCSI Transport Attributes"
depends on SCSI && NET
config SCSI_SAS_ATTRS
tristate "SAS Transport Attributes"
- depends on SCSI
+ depends on SCSI && BLK_DEV_BSG
help
If you wish to export transport-specific information about
each attached SAS device to sysfs, say Y.
source "drivers/scsi/libsas/Kconfig"
+config SCSI_SRP_ATTRS
+ tristate "SRP Transport Attributes"
+ depends on SCSI
+ help
+ If you wish to export transport-specific information about
+ each attached SRP device to sysfs, say Y.
+
+config SCSI_SRP_TGT_ATTRS
+ bool "SCSI target support for SRP Transport Attributes"
+ depends on SCSI_SRP_ATTRS
+ depends on SCSI_TGT = y || SCSI_TGT = SCSI_SRP_ATTRS
+ help
+ If you want to use SCSI target mode drivers enable this option.
+
endmenu
-menu "SCSI low-level drivers"
+menuconfig SCSI_LOWLEVEL
+ bool "SCSI low-level drivers"
depends on SCSI!=n
+ default y
+
+if SCSI_LOWLEVEL
config ISCSI_TCP
tristate "iSCSI Initiator over TCP/IP"
# All the I2O code and drivers do not seem to be 64bit safe.
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
- depends on !64BIT && SCSI && PCI
+ depends on !64BIT && SCSI && PCI && VIRT_TO_BUS
help
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
tristate "AdvanSys SCSI support"
depends on SCSI
depends on ISA || EISA || PCI
- depends on BROKEN || X86_32
help
This is a driver for all SCSI host adapters manufactured by
AdvanSys. It is documented in the kernel source in
module will be called in2000.
config SCSI_ARCMSR
- tristate "ARECA ARC11X0[PCI-X]/ARC12X0[PCI-EXPRESS] SATA-RAID support"
+ tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter"
depends on PCI && SCSI
help
- This driver supports all of ARECA's SATA RAID controller cards.
+ This driver supports all of ARECA's SATA/SAS RAID controller cards.
This is an ARECA-maintained driver by Erich Chen.
- If you have any problems, please mail to: < erich@areca.com.tw >
+ If you have any problems, please mail to: <erich@areca.com.tw>.
Areca supports Linux RAID config tools.
-
- < http://www.areca.com.tw >
+ Please link <http://www.areca.com.tw>
To compile this driver as a module, choose M here: the
module will be called arcmsr (modprobe arcmsr).
+config SCSI_ARCMSR_AER
+ bool "Enable PCI Error Recovery Capability in Areca Driver(ARCMSR)"
+ depends on SCSI_ARCMSR && PCIEAER
+ default n
+ help
+ The advanced error reporting(AER) capability is "NOT" provided by
+ ARC1200/1201/1202 SATA RAID controllers cards.
+ If your card is one of ARC1200/1201/1202, please use the default setting, n.
+ If your card is other models, you could pick it
+ on condition that the kernel version is greater than 2.6.19.
+ This function is maintained driver by Nick Cheng. If you have any
+ problems or suggestion, you are welcome to contact with <nick.cheng@areca.com.tw>.
+ To enable this function, choose Y here.
+
source "drivers/scsi/megaraid/Kconfig.megaraid"
config SCSI_HPTIOP
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
- depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API
+ depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API && VIRT_TO_BUS
---help---
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
config SCSI_IBMMCA
tristate "IBMMCA SCSI support"
- depends on MCA_LEGACY && SCSI
+ depends on MCA && SCSI
---help---
This is support for the IBM SCSI adapter found in many of the PS/2
series computers. These machines have an MCA bus, so you need to
config SCSI_IBMVSCSI
tristate "IBM Virtual SCSI support"
depends on PPC_PSERIES || PPC_ISERIES
+ select SCSI_SRP_ATTRS
help
This is the IBM POWER Virtual SCSI Client
config SCSI_IBMVSCSIS
tristate "IBM Virtual SCSI Server support"
- depends on PPC_PSERIES && SCSI_TGT && SCSI_SRP
+ depends on PPC_PSERIES && SCSI_SRP && SCSI_SRP_TGT_ATTRS
help
This is the SRP target driver for IBM pSeries virtual environments.
To compile this driver as a module, choose M here: the
module will be called stex.
+config 53C700_BE_BUS
+ bool
+ depends on SCSI_A4000T || SCSI_ZORRO7XX || MVME16x_SCSI || BVME6000_SCSI
+ default y
+
config SCSI_SYM53C8XX_2
tristate "SYM53C8XX Version 2 SCSI support"
depends on PCI && SCSI
If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
one in the near future, say Y to this question. Otherwise, say N.
-config SCSI_AMIGA7XX
- bool "Amiga NCR53c710 SCSI support (EXPERIMENTAL)"
- depends on AMIGA && SCSI && EXPERIMENTAL && BROKEN
+config SCSI_A4000T
+ tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)"
+ depends on AMIGA && SCSI && EXPERIMENTAL
+ select SCSI_SPI_ATTRS
help
- Support for various NCR53c710-based SCSI controllers on the Amiga.
+ If you have an Amiga 4000T and have SCSI devices connected to the
+ built-in SCSI controller, say Y. Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called a4000t.
+
+config SCSI_ZORRO7XX
+ tristate "Zorro NCR53c710 SCSI support (EXPERIMENTAL)"
+ depends on ZORRO && SCSI && EXPERIMENTAL
+ select SCSI_SPI_ATTRS
+ help
+ Support for various NCR53c710-based SCSI controllers on Zorro
+ expansion boards for the Amiga.
This includes:
- - the builtin SCSI controller on the Amiga 4000T,
- the Amiga 4091 Zorro III SCSI-2 controller,
- the MacroSystem Development's WarpEngine Amiga SCSI-2 controller
(info at
- the SCSI controller on the Phase5 Blizzard PowerUP 603e+
accelerator card for the Amiga 1200,
- the SCSI controller on the GVP Turbo 040/060 accelerator.
- Note that all of the above SCSI controllers, except for the builtin
- SCSI controller on the Amiga 4000T, reside on the Zorro expansion
- bus, so you also have to enable Zorro bus support if you want to use
- them.
config OKTAGON_SCSI
tristate "BSC Oktagon SCSI support (EXPERIMENTAL)"
single-board computer.
config MVME16x_SCSI
- bool "NCR53C710 SCSI driver for MVME16x"
- depends on MVME16x && SCSI && BROKEN
+ tristate "NCR53C710 SCSI driver for MVME16x"
+ depends on MVME16x && SCSI
select SCSI_SPI_ATTRS
help
The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
will want to say Y to this question.
config BVME6000_SCSI
- bool "NCR53C710 SCSI driver for BVME6000"
- depends on BVME6000 && SCSI && BROKEN
+ tristate "NCR53C710 SCSI driver for BVME6000"
+ depends on BVME6000 && SCSI
select SCSI_SPI_ATTRS
help
The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
SCSI controller chip. Almost everyone using one of these boards
will want to say Y to this question.
-config SCSI_NCR53C7xx_FAST
- bool "allow FAST-SCSI [10MHz]"
- depends on SCSI_AMIGA7XX || MVME16x_SCSI || BVME6000_SCSI
- help
- This will enable 10MHz FAST-SCSI transfers with your host
- adapter. Some systems have problems with that speed, so it's safest
- to say N here.
-
config SUN3_SCSI
tristate "Sun3 NCR5380 SCSI"
depends on SUN3 && SCSI
To compile this driver as a module, choose M here: the
module will be called esp.
-# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
-
config ZFCP
tristate "FCP host bus adapter driver for IBM eServer zSeries"
depends on S390 && QDIO && SCSI
To compile this driver as a module, choose M here: the
module will be called libsrp.
-endmenu
+endif # SCSI_LOWLEVEL
source "drivers/scsi/pcmcia/Kconfig"
projects / linux-2.6-omap-h63xx.git / blobdiff