/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2007 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2008 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
#define LPFC_MIN_DEVLOSS_TMO 1
#define LPFC_MAX_DEVLOSS_TMO 255
+#define LPFC_MAX_LINK_SPEED 8
+#define LPFC_LINK_SPEED_BITMAP 0x00000117
+#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8"
+
static void
lpfc_jedec_to_ascii(int incr, char hdw[])
{
return snprintf(buf, PAGE_SIZE, LPFC_MODULE_DESC "\n");
}
-static ssize_t
-management_version_show(struct class_device *cdev, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, DFC_API_VERSION "\n");
-}
-
static ssize_t
lpfc_info_show(struct class_device *cdev, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%s\n",phba->SerialNumber);
}
+static ssize_t
+lpfc_temp_sensor_show(struct class_device *cdev, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ return snprintf(buf, PAGE_SIZE, "%d\n",phba->temp_sensor_support);
+}
+
static ssize_t
lpfc_modeldesc_show(struct class_device *cdev, char *buf)
{
case LPFC_LINK_UP:
case LPFC_CLEAR_LA:
case LPFC_HBA_READY:
- len += snprintf(buf + len, PAGE_SIZE-len, "Link Up - \n");
+ len += snprintf(buf + len, PAGE_SIZE-len, "Link Up - ");
switch (vport->port_state) {
- len += snprintf(buf + len, PAGE_SIZE-len,
- "initializing\n");
- break;
case LPFC_LOCAL_CFG_LINK:
len += snprintf(buf + len, PAGE_SIZE-len,
"Configuring Link\n");
int mbxstatus = MBXERR_ERROR;
if ((vport->fc_flag & FC_OFFLINE_MODE) ||
- (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) ||
- (vport->port_state != LPFC_VPORT_READY))
+ (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO))
return -EPERM;
pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
psli = &phba->sli;
+ /* Wait a little for things to settle down, but not
+ * long enough for dev loss timeout to expire.
+ */
for (i = 0; i < psli->num_rings; i++) {
pring = &psli->ring[i];
- /* The linkdown event takes 30 seconds to timeout. */
while (pring->txcmplq_cnt) {
msleep(10);
- if (cnt++ > 3000) {
+ if (cnt++ > 500) { /* 5 secs */
lpfc_printf_log(phba,
KERN_WARNING, LOG_INIT,
- "%d:0466 Outstanding IO when "
- "bringing Adapter offline\n",
- phba->brd_no);
+ "0466 Outstanding IO when "
+ "bringing Adapter offline\n");
break;
}
}
struct completion online_compl;
int status = 0;
+ if (!phba->cfg_enable_hba_reset)
+ return -EIO;
+
status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
if (status != 0)
struct completion online_compl;
int status=0;
+ if (!phba->cfg_enable_hba_reset)
+ return -EACCES;
init_completion(&online_compl);
if(strncmp(buf, "online", sizeof("online") - 1) == 0) {
return -EIO;
}
-int
+static int
lpfc_get_hba_info(struct lpfc_hba *phba,
uint32_t *mxri, uint32_t *axri,
uint32_t *mrpi, uint32_t *arpi,
return 0;\
}\
lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \
- "%d:0449 lpfc_"#attr" attribute cannot be set to %d, "\
- "allowed range is ["#minval", "#maxval"]\n", \
- phba->brd_no, val); \
+ "0449 lpfc_"#attr" attribute cannot be set to %d, "\
+ "allowed range is ["#minval", "#maxval"]\n", val); \
phba->cfg_##attr = default;\
return -EINVAL;\
}
return 0;\
}\
lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \
- "%d:0450 lpfc_"#attr" attribute cannot be set to %d, "\
- "allowed range is ["#minval", "#maxval"]\n", \
- phba->brd_no, val); \
+ "0450 lpfc_"#attr" attribute cannot be set to %d, "\
+ "allowed range is ["#minval", "#maxval"]\n", val); \
return -EINVAL;\
}
return -EINVAL;\
}
+#define lpfc_vport_param_show(attr) \
+static ssize_t \
+lpfc_##attr##_show(struct class_device *cdev, char *buf) \
+{ \
+ struct Scsi_Host *shost = class_to_shost(cdev);\
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
+ int val = 0;\
+ val = vport->cfg_##attr;\
+ return snprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_##attr);\
+}
+
+#define lpfc_vport_param_hex_show(attr) \
+static ssize_t \
+lpfc_##attr##_show(struct class_device *cdev, char *buf) \
+{ \
+ struct Scsi_Host *shost = class_to_shost(cdev);\
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
+ int val = 0;\
+ val = vport->cfg_##attr;\
+ return snprintf(buf, PAGE_SIZE, "%#x\n", vport->cfg_##attr);\
+}
+
+#define lpfc_vport_param_init(attr, default, minval, maxval) \
+static int \
+lpfc_##attr##_init(struct lpfc_vport *vport, int val) \
+{ \
+ if (val >= minval && val <= maxval) {\
+ vport->cfg_##attr = val;\
+ return 0;\
+ }\
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \
+ "0449 lpfc_"#attr" attribute cannot be set to %d, "\
+ "allowed range is ["#minval", "#maxval"]\n", val); \
+ vport->cfg_##attr = default;\
+ return -EINVAL;\
+}
+
+#define lpfc_vport_param_set(attr, default, minval, maxval) \
+static int \
+lpfc_##attr##_set(struct lpfc_vport *vport, int val) \
+{ \
+ if (val >= minval && val <= maxval) {\
+ vport->cfg_##attr = val;\
+ return 0;\
+ }\
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \
+ "0450 lpfc_"#attr" attribute cannot be set to %d, "\
+ "allowed range is ["#minval", "#maxval"]\n", val); \
+ return -EINVAL;\
+}
+
+#define lpfc_vport_param_store(attr) \
+static ssize_t \
+lpfc_##attr##_store(struct class_device *cdev, const char *buf, size_t count) \
+{ \
+ struct Scsi_Host *shost = class_to_shost(cdev);\
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
+ int val=0;\
+ if (!isdigit(buf[0]))\
+ return -EINVAL;\
+ if (sscanf(buf, "%i", &val) != 1)\
+ return -EINVAL;\
+ if (lpfc_##attr##_set(vport, val) == 0) \
+ return strlen(buf);\
+ else \
+ return -EINVAL;\
+}
+
+
#define LPFC_ATTR(name, defval, minval, maxval, desc) \
static int lpfc_##name = defval;\
module_param(lpfc_##name, int, 0);\
static CLASS_DEVICE_ATTR(lpfc_##name, S_IRUGO | S_IWUSR,\
lpfc_##name##_show, lpfc_##name##_store)
+#define LPFC_VPORT_ATTR(name, defval, minval, maxval, desc) \
+static int lpfc_##name = defval;\
+module_param(lpfc_##name, int, 0);\
+MODULE_PARM_DESC(lpfc_##name, desc);\
+lpfc_vport_param_init(name, defval, minval, maxval)
+
+#define LPFC_VPORT_ATTR_R(name, defval, minval, maxval, desc) \
+static int lpfc_##name = defval;\
+module_param(lpfc_##name, int, 0);\
+MODULE_PARM_DESC(lpfc_##name, desc);\
+lpfc_vport_param_show(name)\
+lpfc_vport_param_init(name, defval, minval, maxval)\
+static CLASS_DEVICE_ATTR(lpfc_##name, S_IRUGO , lpfc_##name##_show, NULL)
+
+#define LPFC_VPORT_ATTR_RW(name, defval, minval, maxval, desc) \
+static int lpfc_##name = defval;\
+module_param(lpfc_##name, int, 0);\
+MODULE_PARM_DESC(lpfc_##name, desc);\
+lpfc_vport_param_show(name)\
+lpfc_vport_param_init(name, defval, minval, maxval)\
+lpfc_vport_param_set(name, defval, minval, maxval)\
+lpfc_vport_param_store(name)\
+static CLASS_DEVICE_ATTR(lpfc_##name, S_IRUGO | S_IWUSR,\
+ lpfc_##name##_show, lpfc_##name##_store)
+
+#define LPFC_VPORT_ATTR_HEX_R(name, defval, minval, maxval, desc) \
+static int lpfc_##name = defval;\
+module_param(lpfc_##name, int, 0);\
+MODULE_PARM_DESC(lpfc_##name, desc);\
+lpfc_vport_param_hex_show(name)\
+lpfc_vport_param_init(name, defval, minval, maxval)\
+static CLASS_DEVICE_ATTR(lpfc_##name, S_IRUGO , lpfc_##name##_show, NULL)
+
+#define LPFC_VPORT_ATTR_HEX_RW(name, defval, minval, maxval, desc) \
+static int lpfc_##name = defval;\
+module_param(lpfc_##name, int, 0);\
+MODULE_PARM_DESC(lpfc_##name, desc);\
+lpfc_vport_param_hex_show(name)\
+lpfc_vport_param_init(name, defval, minval, maxval)\
+lpfc_vport_param_set(name, defval, minval, maxval)\
+lpfc_vport_param_store(name)\
+static CLASS_DEVICE_ATTR(lpfc_##name, S_IRUGO | S_IWUSR,\
+ lpfc_##name##_show, lpfc_##name##_store)
+
static CLASS_DEVICE_ATTR(info, S_IRUGO, lpfc_info_show, NULL);
static CLASS_DEVICE_ATTR(serialnum, S_IRUGO, lpfc_serialnum_show, NULL);
static CLASS_DEVICE_ATTR(modeldesc, S_IRUGO, lpfc_modeldesc_show, NULL);
static CLASS_DEVICE_ATTR(nport_evt_cnt, S_IRUGO, lpfc_nport_evt_cnt_show, NULL);
static CLASS_DEVICE_ATTR(lpfc_drvr_version, S_IRUGO, lpfc_drvr_version_show,
NULL);
-static CLASS_DEVICE_ATTR(management_version, S_IRUGO, management_version_show,
- NULL);
static CLASS_DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR,
lpfc_board_mode_show, lpfc_board_mode_store);
static CLASS_DEVICE_ATTR(issue_reset, S_IWUSR, NULL, lpfc_issue_reset);
static CLASS_DEVICE_ATTR(max_xri, S_IRUGO, lpfc_max_xri_show, NULL);
static CLASS_DEVICE_ATTR(used_xri, S_IRUGO, lpfc_used_xri_show, NULL);
static CLASS_DEVICE_ATTR(npiv_info, S_IRUGO, lpfc_npiv_info_show, NULL);
+static CLASS_DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show,
+ NULL);
static char *lpfc_soft_wwn_key = "C99G71SL8032A";
unsigned int i, j, cnt=count;
u8 wwpn[8];
+ if (!phba->cfg_enable_hba_reset)
+ return -EACCES;
+ spin_lock_irq(&phba->hbalock);
+ if (phba->over_temp_state == HBA_OVER_TEMP) {
+ spin_unlock_irq(&phba->hbalock);
+ return -EACCES;
+ }
+ spin_unlock_irq(&phba->hbalock);
/* count may include a LF at end of string */
if (buf[cnt-1] == '\n')
cnt--;
stat1 = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
if (stat1)
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "%d:0463 lpfc_soft_wwpn attribute set failed to reinit "
- "adapter - %d\n", phba->brd_no, stat1);
-
+ "0463 lpfc_soft_wwpn attribute set failed to "
+ "reinit adapter - %d\n", stat1);
init_completion(&online_compl);
lpfc_workq_post_event(phba, &stat2, &online_compl, LPFC_EVT_ONLINE);
wait_for_completion(&online_compl);
if (stat2)
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "%d:0464 lpfc_soft_wwpn attribute set failed to reinit "
- "adapter - %d\n", phba->brd_no, stat2);
-
+ "0464 lpfc_soft_wwpn attribute set failed to "
+ "reinit adapter - %d\n", stat2);
return (stat1 || stat2) ? -EIO : count;
}
static CLASS_DEVICE_ATTR(lpfc_soft_wwpn, S_IRUGO | S_IWUSR,\
static ssize_t
lpfc_soft_wwnn_show(struct class_device *cdev, char *buf)
{
- struct Scsi_Host *host = class_to_shost(cdev);
- struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
return snprintf(buf, PAGE_SIZE, "0x%llx\n",
(unsigned long long)phba->cfg_soft_wwnn);
}
static ssize_t
lpfc_soft_wwnn_store(struct class_device *cdev, const char *buf, size_t count)
{
- struct Scsi_Host *host = class_to_shost(cdev);
- struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
unsigned int i, j, cnt=count;
u8 wwnn[8];
" 2 - select SLI-2 even on SLI-3 capable HBAs,"
" 3 - select SLI-3");
-LPFC_ATTR_R(npiv_enable, 0, 0, 1, "Enable NPIV functionality");
+int lpfc_enable_npiv = 0;
+module_param(lpfc_enable_npiv, int, 0);
+MODULE_PARM_DESC(lpfc_enable_npiv, "Enable NPIV functionality");
+lpfc_param_show(enable_npiv);
+lpfc_param_init(enable_npiv, 0, 0, 1);
+static CLASS_DEVICE_ATTR(lpfc_enable_npiv, S_IRUGO,
+ lpfc_enable_npiv_show, NULL);
/*
# lpfc_nodev_tmo: If set, it will hold all I/O errors on devices that disappear
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
- struct lpfc_hba *phba = vport->phba;
int val = 0;
- val = phba->cfg_devloss_tmo;
- return snprintf(buf, PAGE_SIZE, "%d\n",
- phba->cfg_devloss_tmo);
+ val = vport->cfg_devloss_tmo;
+ return snprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_devloss_tmo);
}
static int
-lpfc_nodev_tmo_init(struct lpfc_hba *phba, int val)
-{
- static int warned;
- if (phba->cfg_devloss_tmo != LPFC_DEF_DEVLOSS_TMO) {
- phba->cfg_nodev_tmo = phba->cfg_devloss_tmo;
- if (!warned && val != LPFC_DEF_DEVLOSS_TMO) {
- warned = 1;
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "%d:0402 Ignoring nodev_tmo module "
- "parameter because devloss_tmo is"
- " set.\n",
- phba->brd_no);
- }
+lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val)
+{
+ if (vport->cfg_devloss_tmo != LPFC_DEF_DEVLOSS_TMO) {
+ vport->cfg_nodev_tmo = vport->cfg_devloss_tmo;
+ if (val != LPFC_DEF_DEVLOSS_TMO)
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0402 Ignoring nodev_tmo module "
+ "parameter because devloss_tmo is "
+ "set.\n");
return 0;
}
if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) {
- phba->cfg_nodev_tmo = val;
- phba->cfg_devloss_tmo = val;
+ vport->cfg_nodev_tmo = val;
+ vport->cfg_devloss_tmo = val;
return 0;
}
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "%d:0400 lpfc_nodev_tmo attribute cannot be set to %d, "
- "allowed range is [%d, %d]\n",
- phba->brd_no, val,
- LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO);
- phba->cfg_nodev_tmo = LPFC_DEF_DEVLOSS_TMO;
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0400 lpfc_nodev_tmo attribute cannot be set to"
+ " %d, allowed range is [%d, %d]\n",
+ val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO);
+ vport->cfg_nodev_tmo = LPFC_DEF_DEVLOSS_TMO;
return -EINVAL;
}
static void
-lpfc_update_rport_devloss_tmo(struct lpfc_hba *phba)
+lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport)
{
- struct lpfc_vport *vport;
struct Scsi_Host *shost;
struct lpfc_nodelist *ndlp;
- list_for_each_entry(vport, &phba->port_list, listentry) {
- shost = lpfc_shost_from_vport(vport);
- spin_lock_irq(shost->host_lock);
- list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp)
- if (ndlp->rport)
- ndlp->rport->dev_loss_tmo =
- phba->cfg_devloss_tmo;
- spin_unlock_irq(shost->host_lock);
- }
+ shost = lpfc_shost_from_vport(vport);
+ spin_lock_irq(shost->host_lock);
+ list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp)
+ if (ndlp->rport)
+ ndlp->rport->dev_loss_tmo = vport->cfg_devloss_tmo;
+ spin_unlock_irq(shost->host_lock);
}
static int
-lpfc_nodev_tmo_set(struct lpfc_hba *phba, int val)
+lpfc_nodev_tmo_set(struct lpfc_vport *vport, int val)
{
- if (phba->dev_loss_tmo_changed ||
- (lpfc_devloss_tmo != LPFC_DEF_DEVLOSS_TMO)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "%d:0401 Ignoring change to nodev_tmo "
- "because devloss_tmo is set.\n",
- phba->brd_no);
+ if (vport->dev_loss_tmo_changed ||
+ (lpfc_devloss_tmo != LPFC_DEF_DEVLOSS_TMO)) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0401 Ignoring change to nodev_tmo "
+ "because devloss_tmo is set.\n");
return 0;
}
-
if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) {
- phba->cfg_nodev_tmo = val;
- phba->cfg_devloss_tmo = val;
- lpfc_update_rport_devloss_tmo(phba);
+ vport->cfg_nodev_tmo = val;
+ vport->cfg_devloss_tmo = val;
+ lpfc_update_rport_devloss_tmo(vport);
return 0;
}
-
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "%d:0403 lpfc_nodev_tmo attribute cannot be set to %d, "
- "allowed range is [%d, %d]\n",
- phba->brd_no, val, LPFC_MIN_DEVLOSS_TMO,
- LPFC_MAX_DEVLOSS_TMO);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0403 lpfc_nodev_tmo attribute cannot be set to"
+ "%d, allowed range is [%d, %d]\n",
+ val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO);
return -EINVAL;
}
-lpfc_param_store(nodev_tmo)
+lpfc_vport_param_store(nodev_tmo)
static CLASS_DEVICE_ATTR(lpfc_nodev_tmo, S_IRUGO | S_IWUSR,
lpfc_nodev_tmo_show, lpfc_nodev_tmo_store);
MODULE_PARM_DESC(lpfc_devloss_tmo,
"Seconds driver will hold I/O waiting "
"for a device to come back");
-lpfc_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO,
- LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO)
-lpfc_param_show(devloss_tmo)
+lpfc_vport_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO,
+ LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO)
+lpfc_vport_param_show(devloss_tmo)
static int
-lpfc_devloss_tmo_set(struct lpfc_hba *phba, int val)
+lpfc_devloss_tmo_set(struct lpfc_vport *vport, int val)
{
if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) {
- phba->cfg_nodev_tmo = val;
- phba->cfg_devloss_tmo = val;
- phba->dev_loss_tmo_changed = 1;
- lpfc_update_rport_devloss_tmo(phba);
+ vport->cfg_nodev_tmo = val;
+ vport->cfg_devloss_tmo = val;
+ vport->dev_loss_tmo_changed = 1;
+ lpfc_update_rport_devloss_tmo(vport);
return 0;
}
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "%d:0404 lpfc_devloss_tmo attribute cannot be set to"
- " %d, allowed range is [%d, %d]\n",
- phba->brd_no, val, LPFC_MIN_DEVLOSS_TMO,
- LPFC_MAX_DEVLOSS_TMO);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0404 lpfc_devloss_tmo attribute cannot be set to"
+ " %d, allowed range is [%d, %d]\n",
+ val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO);
return -EINVAL;
}
-lpfc_param_store(devloss_tmo)
+lpfc_vport_param_store(devloss_tmo)
static CLASS_DEVICE_ATTR(lpfc_devloss_tmo, S_IRUGO | S_IWUSR,
lpfc_devloss_tmo_show, lpfc_devloss_tmo_store);
# LOG_LIBDFC 0x2000 LIBDFC events
# LOG_ALL_MSG 0xffff LOG all messages
*/
-LPFC_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffff, "Verbose logging bit-mask");
+LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffff,
+ "Verbose logging bit-mask");
+
+/*
+# lpfc_enable_da_id: This turns on the DA_ID CT command that deregisters
+# objects that have been registered with the nameserver after login.
+*/
+LPFC_VPORT_ATTR_R(enable_da_id, 0, 0, 1,
+ "Deregister nameserver objects before LOGO");
/*
# lun_queue_depth: This parameter is used to limit the number of outstanding
# commands per FCP LUN. Value range is [1,128]. Default value is 30.
*/
-LPFC_ATTR_R(lun_queue_depth, 30, 1, 128,
- "Max number of FCP commands we can queue to a specific LUN");
+LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 128,
+ "Max number of FCP commands we can queue to a specific LUN");
/*
# hba_queue_depth: This parameter is used to limit the number of outstanding
# are allowed to login to each other.
# Default value of this parameter is 0.
*/
-LPFC_ATTR_R(peer_port_login, 0, 0, 1,
- "Allow peer ports on the same physical port to login to each "
- "other.");
+LPFC_VPORT_ATTR_R(peer_port_login, 0, 0, 1,
+ "Allow peer ports on the same physical port to login to each "
+ "other.");
/*
-# vport_restrict_login: This parameter allows/prevents logins
+# restrict_login: This parameter allows/prevents logins
# between Virtual Ports and remote initiators.
# When this parameter is not set (0) Virtual Ports will accept PLOGIs from
# other initiators and will attempt to PLOGI all remote ports.
# This parameter does not restrict logins to Fabric resident remote ports.
# Default value of this parameter is 1.
*/
-LPFC_ATTR_RW(vport_restrict_login, 1, 0, 1,
- "Restrict virtual ports login to remote initiators.");
+static int lpfc_restrict_login = 1;
+module_param(lpfc_restrict_login, int, 0);
+MODULE_PARM_DESC(lpfc_restrict_login,
+ "Restrict virtual ports login to remote initiators.");
+lpfc_vport_param_show(restrict_login);
+
+static int
+lpfc_restrict_login_init(struct lpfc_vport *vport, int val)
+{
+ if (val < 0 || val > 1) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0449 lpfc_restrict_login attribute cannot "
+ "be set to %d, allowed range is [0, 1]\n",
+ val);
+ vport->cfg_restrict_login = 1;
+ return -EINVAL;
+ }
+ if (vport->port_type == LPFC_PHYSICAL_PORT) {
+ vport->cfg_restrict_login = 0;
+ return 0;
+ }
+ vport->cfg_restrict_login = val;
+ return 0;
+}
+
+static int
+lpfc_restrict_login_set(struct lpfc_vport *vport, int val)
+{
+ if (val < 0 || val > 1) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0450 lpfc_restrict_login attribute cannot "
+ "be set to %d, allowed range is [0, 1]\n",
+ val);
+ vport->cfg_restrict_login = 1;
+ return -EINVAL;
+ }
+ if (vport->port_type == LPFC_PHYSICAL_PORT && val != 0) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0468 lpfc_restrict_login must be 0 for "
+ "Physical ports.\n");
+ vport->cfg_restrict_login = 0;
+ return 0;
+ }
+ vport->cfg_restrict_login = val;
+ return 0;
+}
+lpfc_vport_param_store(restrict_login);
+static CLASS_DEVICE_ATTR(lpfc_restrict_login, S_IRUGO | S_IWUSR,
+ lpfc_restrict_login_show, lpfc_restrict_login_store);
/*
# Some disk devices have a "select ID" or "select Target" capability.
# and will not work across a fabric. Also this parameter will take
# effect only in the case when ALPA map is not available.)
*/
-LPFC_ATTR_R(scan_down, 1, 0, 1,
- "Start scanning for devices from highest ALPA to lowest");
+LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1,
+ "Start scanning for devices from highest ALPA to lowest");
/*
# lpfc_topology: link topology for init link
# Set loop mode if you want to run as an NL_Port. Value range is [0,0x6].
# Default value is 0.
*/
-LPFC_ATTR_RW(topology, 0, 0, 6, "Select Fibre Channel topology");
+static int
+lpfc_topology_set(struct lpfc_hba *phba, int val)
+{
+ int err;
+ uint32_t prev_val;
+ if (val >= 0 && val <= 6) {
+ prev_val = phba->cfg_topology;
+ phba->cfg_topology = val;
+ err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
+ if (err)
+ phba->cfg_topology = prev_val;
+ return err;
+ }
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "%d:0467 lpfc_topology attribute cannot be set to %d, "
+ "allowed range is [0, 6]\n",
+ phba->brd_no, val);
+ return -EINVAL;
+}
+static int lpfc_topology = 0;
+module_param(lpfc_topology, int, 0);
+MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology");
+lpfc_param_show(topology)
+lpfc_param_init(topology, 0, 0, 6)
+lpfc_param_store(topology)
+static CLASS_DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR,
+ lpfc_topology_show, lpfc_topology_store);
/*
# lpfc_link_speed: Link speed selection for initializing the Fibre Channel
# 8 = 8 Gigabaud
# Value range is [0,8]. Default value is 0.
*/
-LPFC_ATTR_R(link_speed, 0, 0, 8, "Select link speed");
+static int
+lpfc_link_speed_set(struct lpfc_hba *phba, int val)
+{
+ int err;
+ uint32_t prev_val;
+
+ if (((val == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
+ ((val == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
+ ((val == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
+ ((val == LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) ||
+ ((val == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)))
+ return -EINVAL;
+
+ if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED)
+ && (LPFC_LINK_SPEED_BITMAP & (1 << val))) {
+ prev_val = phba->cfg_link_speed;
+ phba->cfg_link_speed = val;
+ err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
+ if (err)
+ phba->cfg_link_speed = prev_val;
+ return err;
+ }
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "%d:0469 lpfc_link_speed attribute cannot be set to %d, "
+ "allowed range is [0, 8]\n",
+ phba->brd_no, val);
+ return -EINVAL;
+}
+
+static int lpfc_link_speed = 0;
+module_param(lpfc_link_speed, int, 0);
+MODULE_PARM_DESC(lpfc_link_speed, "Select link speed");
+lpfc_param_show(link_speed)
+static int
+lpfc_link_speed_init(struct lpfc_hba *phba, int val)
+{
+ if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED)
+ && (LPFC_LINK_SPEED_BITMAP & (1 << val))) {
+ phba->cfg_link_speed = val;
+ return 0;
+ }
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0454 lpfc_link_speed attribute cannot "
+ "be set to %d, allowed values are "
+ "["LPFC_LINK_SPEED_STRING"]\n", val);
+ phba->cfg_link_speed = 0;
+ return -EINVAL;
+}
+
+lpfc_param_store(link_speed)
+static CLASS_DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR,
+ lpfc_link_speed_show, lpfc_link_speed_store);
/*
# lpfc_fcp_class: Determines FC class to use for the FCP protocol.
# Value range is [2,3]. Default value is 3.
*/
-LPFC_ATTR_R(fcp_class, 3, 2, 3,
- "Select Fibre Channel class of service for FCP sequences");
+LPFC_VPORT_ATTR_R(fcp_class, 3, 2, 3,
+ "Select Fibre Channel class of service for FCP sequences");
/*
# lpfc_use_adisc: Use ADISC for FCP rediscovery instead of PLOGI. Value range
# is [0,1]. Default value is 0.
*/
-LPFC_ATTR_RW(use_adisc, 0, 0, 1,
- "Use ADISC on rediscovery to authenticate FCP devices");
+LPFC_VPORT_ATTR_RW(use_adisc, 0, 0, 1,
+ "Use ADISC on rediscovery to authenticate FCP devices");
/*
# lpfc_ack0: Use ACK0, instead of ACK1 for class 2 acknowledgement. Value
# 2 = support FDMI with attribute of hostname
# Value range [0,2]. Default value is 0.
*/
-LPFC_ATTR_RW(fdmi_on, 0, 0, 2, "Enable FDMI support");
+LPFC_VPORT_ATTR_RW(fdmi_on, 0, 0, 2, "Enable FDMI support");
/*
# Specifies the maximum number of ELS cmds we can have outstanding (for
# discovery). Value range is [1,64]. Default value = 32.
*/
-LPFC_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands "
+LPFC_VPORT_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands "
"during discovery");
/*
# Value range is [0,65535]. Default value is 255.
# NOTE: The SCSI layer might probe all allowed LUN on some old targets.
*/
-LPFC_ATTR_R(max_luns, 255, 0, 65535,
- "Maximum allowed LUN");
+LPFC_VPORT_ATTR_R(max_luns, 255, 0, 65535, "Maximum allowed LUN");
/*
# lpfc_poll_tmo: .Milliseconds driver will wait between polling FCP ring.
*/
LPFC_ATTR_R(use_msi, 0, 0, 1, "Use Message Signaled Interrupts, if possible");
+/*
+# lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware.
+# 0 = HBA resets disabled
+# 1 = HBA resets enabled (default)
+# Value range is [0,1]. Default value is 1.
+*/
+LPFC_ATTR_R(enable_hba_reset, 1, 0, 1, "Enable HBA resets from the driver.");
+/*
+# lpfc_enable_hba_heartbeat: Enable HBA heartbeat timer..
+# 0 = HBA Heartbeat disabled
+# 1 = HBA Heartbeat enabled (default)
+# Value range is [0,1]. Default value is 1.
+*/
+LPFC_ATTR_R(enable_hba_heartbeat, 1, 0, 1, "Enable HBA Heartbeat.");
+
+/*
+ * lpfc_sg_seg_cnt: Initial Maximum DMA Segment Count
+ * This value can be set to values between 64 and 256. The default value is
+ * 64, but may be increased to allow for larger Max I/O sizes. The scsi layer
+ * will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE).
+ */
+LPFC_ATTR_R(sg_seg_cnt, LPFC_DEFAULT_SG_SEG_CNT, LPFC_DEFAULT_SG_SEG_CNT,
+ LPFC_MAX_SG_SEG_CNT, "Max Scatter Gather Segment Count");
struct class_device_attribute *lpfc_hba_attrs[] = {
&class_device_attr_info,
&class_device_attr_state,
&class_device_attr_num_discovered_ports,
&class_device_attr_lpfc_drvr_version,
+ &class_device_attr_lpfc_temp_sensor,
&class_device_attr_lpfc_log_verbose,
&class_device_attr_lpfc_lun_queue_depth,
&class_device_attr_lpfc_hba_queue_depth,
&class_device_attr_lpfc_peer_port_login,
- &class_device_attr_lpfc_vport_restrict_login,
&class_device_attr_lpfc_nodev_tmo,
&class_device_attr_lpfc_devloss_tmo,
&class_device_attr_lpfc_fcp_class,
&class_device_attr_lpfc_multi_ring_type,
&class_device_attr_lpfc_fdmi_on,
&class_device_attr_lpfc_max_luns,
- &class_device_attr_lpfc_npiv_enable,
+ &class_device_attr_lpfc_enable_npiv,
&class_device_attr_nport_evt_cnt,
- &class_device_attr_management_version,
&class_device_attr_board_mode,
&class_device_attr_max_vpi,
&class_device_attr_used_vpi,
&class_device_attr_lpfc_soft_wwnn,
&class_device_attr_lpfc_soft_wwpn,
&class_device_attr_lpfc_soft_wwn_enable,
+ &class_device_attr_lpfc_enable_hba_reset,
+ &class_device_attr_lpfc_enable_hba_heartbeat,
+ &class_device_attr_lpfc_sg_seg_cnt,
+ NULL,
+};
+
+struct class_device_attribute *lpfc_vport_attrs[] = {
+ &class_device_attr_info,
+ &class_device_attr_state,
+ &class_device_attr_num_discovered_ports,
+ &class_device_attr_lpfc_drvr_version,
+
+ &class_device_attr_lpfc_log_verbose,
+ &class_device_attr_lpfc_lun_queue_depth,
+ &class_device_attr_lpfc_nodev_tmo,
+ &class_device_attr_lpfc_devloss_tmo,
+ &class_device_attr_lpfc_hba_queue_depth,
+ &class_device_attr_lpfc_peer_port_login,
+ &class_device_attr_lpfc_restrict_login,
+ &class_device_attr_lpfc_fcp_class,
+ &class_device_attr_lpfc_use_adisc,
+ &class_device_attr_lpfc_fdmi_on,
+ &class_device_attr_lpfc_max_luns,
+ &class_device_attr_nport_evt_cnt,
+ &class_device_attr_npiv_info,
+ &class_device_attr_lpfc_enable_da_id,
NULL,
};
spin_lock_irq(&phba->hbalock);
+ if (phba->over_temp_state == HBA_OVER_TEMP) {
+ sysfs_mbox_idle(phba);
+ spin_unlock_irq(&phba->hbalock);
+ return -EACCES;
+ }
+
if (off == 0 &&
phba->sysfs_mbox.state == SMBOX_WRITING &&
phba->sysfs_mbox.offset >= 2 * sizeof(uint32_t)) {
switch (phba->sysfs_mbox.mbox->mb.mbxCommand) {
/* Offline only */
- case MBX_WRITE_NV:
case MBX_INIT_LINK:
case MBX_DOWN_LINK:
case MBX_CONFIG_LINK:
case MBX_DUMP_CONTEXT:
case MBX_RUN_DIAGS:
case MBX_RESTART:
- case MBX_FLASH_WR_ULA:
case MBX_SET_MASK:
- case MBX_SET_SLIM:
case MBX_SET_DEBUG:
if (!(vport->fc_flag & FC_OFFLINE_MODE)) {
printk(KERN_WARNING "mbox_read:Command 0x%x "
spin_unlock_irq(&phba->hbalock);
return -EPERM;
}
+ case MBX_WRITE_NV:
+ case MBX_WRITE_VPARMS:
case MBX_LOAD_SM:
case MBX_READ_NV:
case MBX_READ_CONFIG:
case MBX_LOAD_EXP_ROM:
case MBX_BEACON:
case MBX_DEL_LD_ENTRY:
+ case MBX_SET_VARIABLE:
+ case MBX_WRITE_WWN:
break;
case MBX_READ_SPARM64:
case MBX_READ_LA:
return -EPERM;
}
+ /* If HBA encountered an error attention, allow only DUMP
+ * mailbox command until the HBA is restarted.
+ */
+ if ((phba->pport->stopped) &&
+ (phba->sysfs_mbox.mbox->mb.mbxCommand
+ != MBX_DUMP_MEMORY)) {
+ sysfs_mbox_idle(phba);
+ spin_unlock_irq(&phba->hbalock);
+ return -EPERM;
+ }
+
phba->sysfs_mbox.mbox->vport = vport;
if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) {
fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
break;
}
- }
+ } else
+ fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
spin_unlock_irq(shost->host_lock);
}
node_name = wwn_to_u64(phba->fc_fabparam.nodeName.u.wwn);
else
/* fabric is local port if there is no F/FL_Port */
- node_name = wwn_to_u64(vport->fc_nodename.u.wwn);
+ node_name = 0;
spin_unlock_irq(shost->host_lock);
.dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk,
.terminate_rport_io = lpfc_terminate_rport_io,
- .vport_create = lpfc_vport_create,
- .vport_delete = lpfc_vport_delete,
.dd_fcvport_size = sizeof(struct lpfc_vport *),
};
.get_starget_port_name = lpfc_get_starget_port_name,
.show_starget_port_name = 1,
- .issue_fc_host_lip = lpfc_issue_lip,
.dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk,
.terminate_rport_io = lpfc_terminate_rport_io,
void
lpfc_get_cfgparam(struct lpfc_hba *phba)
{
- lpfc_log_verbose_init(phba, lpfc_log_verbose);
lpfc_cr_delay_init(phba, lpfc_cr_delay);
lpfc_cr_count_init(phba, lpfc_cr_count);
lpfc_multi_ring_support_init(phba, lpfc_multi_ring_support);
lpfc_multi_ring_rctl_init(phba, lpfc_multi_ring_rctl);
lpfc_multi_ring_type_init(phba, lpfc_multi_ring_type);
- lpfc_lun_queue_depth_init(phba, lpfc_lun_queue_depth);
- lpfc_fcp_class_init(phba, lpfc_fcp_class);
- lpfc_use_adisc_init(phba, lpfc_use_adisc);
lpfc_ack0_init(phba, lpfc_ack0);
lpfc_topology_init(phba, lpfc_topology);
- lpfc_scan_down_init(phba, lpfc_scan_down);
lpfc_link_speed_init(phba, lpfc_link_speed);
- lpfc_fdmi_on_init(phba, lpfc_fdmi_on);
- lpfc_discovery_threads_init(phba, lpfc_discovery_threads);
- lpfc_max_luns_init(phba, lpfc_max_luns);
lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
- lpfc_peer_port_login_init(phba, lpfc_peer_port_login);
- lpfc_npiv_enable_init(phba, lpfc_npiv_enable);
- lpfc_vport_restrict_login_init(phba, lpfc_vport_restrict_login);
+ lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
lpfc_use_msi_init(phba, lpfc_use_msi);
- lpfc_devloss_tmo_init(phba, lpfc_devloss_tmo);
- lpfc_nodev_tmo_init(phba, lpfc_nodev_tmo);
+ lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
+ lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
phba->cfg_poll = lpfc_poll;
phba->cfg_soft_wwnn = 0L;
phba->cfg_soft_wwpn = 0L;
-
- /*
- * The total number of segments is the configuration value plus 2
- * since the IOCB need a command and response bde.
- */
- phba->cfg_sg_seg_cnt = LPFC_SG_SEG_CNT + 2;
-
+ lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
+ /* Also reinitialize the host templates with new values. */
+ lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+ lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
/*
* Since the sg_tablesize is module parameter, the sg_dma_buf_size
- * used to create the sg_dma_buf_pool must be dynamically calculated
+ * used to create the sg_dma_buf_pool must be dynamically calculated.
+ * 2 segments are added since the IOCB needs a command and response bde.
*/
phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
sizeof(struct fcp_rsp) +
- (phba->cfg_sg_seg_cnt * sizeof(struct ulp_bde64));
-
-
+ ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
+ return;
+}
+void
+lpfc_get_vport_cfgparam(struct lpfc_vport *vport)
+{
+ lpfc_log_verbose_init(vport, lpfc_log_verbose);
+ lpfc_lun_queue_depth_init(vport, lpfc_lun_queue_depth);
+ lpfc_devloss_tmo_init(vport, lpfc_devloss_tmo);
+ lpfc_nodev_tmo_init(vport, lpfc_nodev_tmo);
+ lpfc_peer_port_login_init(vport, lpfc_peer_port_login);
+ lpfc_restrict_login_init(vport, lpfc_restrict_login);
+ lpfc_fcp_class_init(vport, lpfc_fcp_class);
+ lpfc_use_adisc_init(vport, lpfc_use_adisc);
+ lpfc_fdmi_on_init(vport, lpfc_fdmi_on);
+ lpfc_discovery_threads_init(vport, lpfc_discovery_threads);
+ lpfc_max_luns_init(vport, lpfc_max_luns);
+ lpfc_scan_down_init(vport, lpfc_scan_down);
+ lpfc_enable_da_id_init(vport, lpfc_enable_da_id);
return;
}
projects / linux-2.6-omap-h63xx.git / blobdiff