-/********************************************************************************
-* QLOGIC LINUX SOFTWARE
-*
-* QLogic ISP2x00 device driver for Linux 2.6.x
-* Copyright (C) 2003-2005 QLogic Corporation
-* (www.qlogic.com)
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2, or (at your option) any
-* later version.
-*
-* This program is distributed in the hope that it will be useful, but
-* WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-* General Public License for more details.
-**
-******************************************************************************/
-
+/*
+ * QLogic Fibre Channel HBA Driver
+ * Copyright (c) 2003-2005 QLogic Corporation
+ *
+ * See LICENSE.qla2xxx for copyright and licensing details.
+ */
#ifndef __QLA_DEF_H
#define __QLA_DEF_H
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/firmware.h>
#include <asm/semaphore.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
+#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
#if defined(CONFIG_SCSI_QLA21XX) || defined(CONFIG_SCSI_QLA21XX_MODULE)
#define IS_QLA2100(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2100)
#else
#define IS_QLA2522(ha) 0
#endif
+#else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */
+
+#define IS_QLA2100(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2100)
+#define IS_QLA2200(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2200)
+#define IS_QLA2300(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2300)
+#define IS_QLA2312(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2312)
+#define IS_QLA2322(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2322)
+#define IS_QLA6312(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP6312)
+#define IS_QLA6322(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP6322)
+#define IS_QLA2422(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422)
+#define IS_QLA2432(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432)
+#define IS_QLA2512(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2512)
+#define IS_QLA2522(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2522)
+#endif
+
#define IS_QLA23XX(ha) (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \
IS_QLA6312(ha) || IS_QLA6322(ha))
-
#define IS_QLA24XX(ha) (IS_QLA2422(ha) || IS_QLA2432(ha))
#define IS_QLA25XX(ha) (IS_QLA2512(ha) || IS_QLA2522(ha))
* valid range of an N-PORT id is 0 through 0x7ef.
*/
#define NPH_LAST_HANDLE 0x7ef
+#define NPH_MGMT_SERVER 0x7fa /* FFFFFA */
#define NPH_SNS 0x7fc /* FFFFFC */
#define NPH_FABRIC_CONTROLLER 0x7fd /* FFFFFD */
#define NPH_F_PORT 0x7fe /* FFFFFE */
#define MBC_WRITE_RAM_WORD_EXTENDED 0xd /* Write RAM word extended */
#define MBC_READ_RAM_EXTENDED 0xf /* Read RAM extended. */
#define MBC_IOCB_COMMAND 0x12 /* Execute IOCB command. */
+#define MBC_STOP_FIRMWARE 0x14 /* Stop firmware. */
#define MBC_ABORT_COMMAND 0x15 /* Abort IOCB command. */
#define MBC_ABORT_DEVICE 0x16 /* Abort device (ID/LUN). */
#define MBC_ABORT_TARGET 0x17 /* Abort target (ID). */
#define PD_STATE_WAIT_PORT_LOGOUT_ACK 11
+#define QLA_ZIO_MODE_5 (BIT_2 | BIT_0)
+#define QLA_ZIO_MODE_6 (BIT_2 | BIT_1)
+#define QLA_ZIO_DISABLED 0
+#define QLA_ZIO_DEFAULT_TIMER 2
+
/*
* ISP Initialization Control Block.
* Little endian except where noted.
* MSB BIT 1 =
* MSB BIT 2 =
* MSB BIT 3 =
- * MSB BIT 4 =
+ * MSB BIT 4 = LED mode
* MSB BIT 5 = enable 50 ohm termination
* MSB BIT 6 = Data Rate (2300 only)
* MSB BIT 7 = Data Rate (2300 only)
* MSB BIT 1 =
* MSB BIT 2 =
* MSB BIT 3 =
- * MSB BIT 4 =
+ * MSB BIT 4 = LED mode
* MSB BIT 5 = enable 50 ohm termination
* MSB BIT 6 = Data Rate (2300 only)
* MSB BIT 7 = Data Rate (2300 only)
uint8_t link_down_timeout;
- uint8_t adapter_id_0[4];
- uint8_t adapter_id_1[4];
- uint8_t adapter_id_2[4];
- uint8_t adapter_id_3[4];
+ uint8_t adapter_id[16];
uint8_t alt1_boot_node_name[WWN_SIZE];
uint16_t alt1_boot_lun_number;
uint8_t cur_path; /* current path id */
struct fc_rport *rport;
+ u32 supported_classes;
+ struct work_struct rport_add_work;
+ struct work_struct rport_del_work;
} fc_port_t;
/*
#define CT_REJECT_RESPONSE 0x8001
#define CT_ACCEPT_RESPONSE 0x8002
+#define CT_REASON_CANNOT_PERFORM 0x09
+#define CT_EXPL_ALREADY_REGISTERED 0x10
#define NS_N_PORT_TYPE 0x01
#define NS_NL_PORT_TYPE 0x02
#define RSNN_NN_REQ_SIZE (16 + 8 + 1 + 255)
#define RSNN_NN_RSP_SIZE 16
+/*
+ * HBA attribute types.
+ */
+#define FDMI_HBA_ATTR_COUNT 9
+#define FDMI_HBA_NODE_NAME 1
+#define FDMI_HBA_MANUFACTURER 2
+#define FDMI_HBA_SERIAL_NUMBER 3
+#define FDMI_HBA_MODEL 4
+#define FDMI_HBA_MODEL_DESCRIPTION 5
+#define FDMI_HBA_HARDWARE_VERSION 6
+#define FDMI_HBA_DRIVER_VERSION 7
+#define FDMI_HBA_OPTION_ROM_VERSION 8
+#define FDMI_HBA_FIRMWARE_VERSION 9
+#define FDMI_HBA_OS_NAME_AND_VERSION 0xa
+#define FDMI_HBA_MAXIMUM_CT_PAYLOAD_LENGTH 0xb
+
+struct ct_fdmi_hba_attr {
+ uint16_t type;
+ uint16_t len;
+ union {
+ uint8_t node_name[WWN_SIZE];
+ uint8_t manufacturer[32];
+ uint8_t serial_num[8];
+ uint8_t model[16];
+ uint8_t model_desc[80];
+ uint8_t hw_version[16];
+ uint8_t driver_version[32];
+ uint8_t orom_version[16];
+ uint8_t fw_version[16];
+ uint8_t os_version[128];
+ uint8_t max_ct_len[4];
+ } a;
+};
+
+struct ct_fdmi_hba_attributes {
+ uint32_t count;
+ struct ct_fdmi_hba_attr entry[FDMI_HBA_ATTR_COUNT];
+};
+
+/*
+ * Port attribute types.
+ */
+#define FDMI_PORT_ATTR_COUNT 5
+#define FDMI_PORT_FC4_TYPES 1
+#define FDMI_PORT_SUPPORT_SPEED 2
+#define FDMI_PORT_CURRENT_SPEED 3
+#define FDMI_PORT_MAX_FRAME_SIZE 4
+#define FDMI_PORT_OS_DEVICE_NAME 5
+#define FDMI_PORT_HOST_NAME 6
+
+struct ct_fdmi_port_attr {
+ uint16_t type;
+ uint16_t len;
+ union {
+ uint8_t fc4_types[32];
+ uint32_t sup_speed;
+ uint32_t cur_speed;
+ uint32_t max_frame_size;
+ uint8_t os_dev_name[32];
+ uint8_t host_name[32];
+ } a;
+};
+
+/*
+ * Port Attribute Block.
+ */
+struct ct_fdmi_port_attributes {
+ uint32_t count;
+ struct ct_fdmi_port_attr entry[FDMI_PORT_ATTR_COUNT];
+};
+
+/* FDMI definitions. */
+#define GRHL_CMD 0x100
+#define GHAT_CMD 0x101
+#define GRPL_CMD 0x102
+#define GPAT_CMD 0x110
+
+#define RHBA_CMD 0x200
+#define RHBA_RSP_SIZE 16
+
+#define RHAT_CMD 0x201
+#define RPRT_CMD 0x210
+
+#define RPA_CMD 0x211
+#define RPA_RSP_SIZE 16
+
+#define DHBA_CMD 0x300
+#define DHBA_REQ_SIZE (16 + 8)
+#define DHBA_RSP_SIZE 16
+
+#define DHAT_CMD 0x301
+#define DPRT_CMD 0x310
+#define DPA_CMD 0x311
+
/* CT command header -- request/response common fields */
struct ct_cmd_hdr {
uint8_t revision;
uint8_t name_len;
uint8_t sym_node_name[255];
} rsnn_nn;
+
+ struct {
+ uint8_t hba_indentifier[8];
+ } ghat;
+
+ struct {
+ uint8_t hba_identifier[8];
+ uint32_t entry_count;
+ uint8_t port_name[8];
+ struct ct_fdmi_hba_attributes attrs;
+ } rhba;
+
+ struct {
+ uint8_t hba_identifier[8];
+ struct ct_fdmi_hba_attributes attrs;
+ } rhat;
+
+ struct {
+ uint8_t port_name[8];
+ struct ct_fdmi_port_attributes attrs;
+ } rpa;
+
+ struct {
+ uint8_t port_name[8];
+ } dhba;
+
+ struct {
+ uint8_t port_name[8];
+ } dhat;
+
+ struct {
+ uint8_t port_name[8];
+ } dprt;
+
+ struct {
+ uint8_t port_name[8];
+ } dpa;
} req;
};
struct {
uint8_t fc4_types[32];
} gft_id;
+
+ struct {
+ uint32_t entry_count;
+ uint8_t port_name[8];
+ struct ct_fdmi_hba_attributes attrs;
+ } ghat;
} rsp;
};
struct scsi_host_template *sht;
};
+struct fw_blob {
+ char *name;
+ uint32_t segs[4];
+ const struct firmware *fw;
+};
+
/* Return data from MBC_GET_ID_LIST call. */
struct gid_list_info {
uint8_t al_pa;
uint16_t (*calc_req_entries) (uint16_t);
void (*build_iocbs) (srb_t *, cmd_entry_t *, uint16_t);
void * (*prep_ms_iocb) (struct scsi_qla_host *, uint32_t, uint32_t);
+ void * (*prep_ms_fdmi_iocb) (struct scsi_qla_host *, uint32_t,
+ uint32_t);
uint8_t * (*read_nvram) (struct scsi_qla_host *, uint8_t *,
uint32_t, uint32_t);
#define IOCTL_ERROR_RECOVERY 23
#define LOOP_RESET_NEEDED 24
#define BEACON_BLINK_NEEDED 25
+#define REGISTER_FDMI_NEEDED 26
uint32_t device_flags;
#define DFLG_LOCAL_DEVICES BIT_0
int port_down_retry_count;
uint8_t mbx_count;
uint16_t last_loop_id;
+ uint16_t mgmt_svr_loop_id;
uint32_t login_retry_count;
uint8_t model_number[16+1];
#define BINZERO "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
char *model_desc;
+ uint8_t adapter_id[16+1];
uint8_t *node_name;
uint8_t *port_name;
/* Needed for BEACON */
uint16_t beacon_blink_led;
uint16_t beacon_green_on;
+
+ uint16_t zio_mode;
+ uint16_t zio_timer;
} scsi_qla_host_t;
*/
#define LOOP_TRANSITION(ha) \
(test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \
- test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
-
-#define LOOP_NOT_READY(ha) \
- ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \
- test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) || \
- test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \
- test_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags)) || \
+ test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \
atomic_read(&ha->loop_state) == LOOP_DOWN)
-#define LOOP_RDY(ha) (!LOOP_NOT_READY(ha))
-
#define TGT_Q(ha, t) (ha->otgt[t])
#define to_qla_host(x) ((scsi_qla_host_t *) (x)->hostdata)
#define QLA_SUSPENDED 0x106
#define QLA_BUSY 0x107
#define QLA_RSCNS_HANDLED 0x108
+#define QLA_ALREADY_REGISTERED 0x109
/*
* Stat info for all adpaters
projects / linux-2.6-omap-h63xx.git / blobdiff