[PATCH] qla2xxx: Remove bogus debug-code.

[linux-2.6-omap-h63xx.git] / drivers / scsi / qla2xxx / qla_def.h

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 79d8a914f9d0f4ddb213fd1bd9d5b63f68c39138..b31a03bbd14f4fd495dcc44fe6bfe367aa0c4c6a 100644 (file)
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -29,6 +29,7 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_transport_fc.h>
 
 #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
 #if defined(CONFIG_SCSI_QLA21XX) || defined(CONFIG_SCSI_QLA21XX_MODULE)
@@ -180,6 +181,13 @@
 #define WRT_REG_WORD(addr, data)       writew(data,addr)
 #define WRT_REG_DWORD(addr, data)      writel(data,addr)
 
+/*
+ * The ISP2312 v2 chip cannot access the FLASH/GPIO registers via MMIO in an
+ * 133Mhz slot.
+ */
+#define RD_REG_WORD_PIO(addr)          (inw((unsigned long)addr))
+#define WRT_REG_WORD_PIO(addr, data)   (outw(data,(unsigned long)addr))
+
 /*
  * Fibre Channel device definitions.
  */
@@ -432,6 +440,9 @@ struct device_reg_2xxx {
 #define GPIO_LED_GREEN_ON_AMBER_OFF    0x0040
 #define GPIO_LED_GREEN_OFF_AMBER_ON    0x0080
 #define GPIO_LED_GREEN_ON_AMBER_ON     0x00C0
+#define GPIO_LED_ALL_OFF               0x0000
+#define GPIO_LED_RED_ON_OTHER_OFF      0x0001  /* isp2322 */
+#define GPIO_LED_RGA_ON                        0x00C1  /* isp2322: red green amber */
 
        union {
                struct {
@@ -1680,7 +1691,8 @@ typedef struct fc_port {
        uint8_t mp_byte;                /* multi-path byte (not used) */
        uint8_t cur_path;               /* current path id */
 
-       struct fc_rport *rport;
+       spinlock_t rport_lock;
+       struct fc_rport *rport, *drport;
        u32 supported_classes;
        struct work_struct rport_add_work;
        struct work_struct rport_del_work;
@@ -2198,6 +2210,15 @@ struct isp_operations {
 
        void (*fw_dump) (struct scsi_qla_host *, int);
        void (*ascii_fw_dump) (struct scsi_qla_host *);
+
+       int (*beacon_on) (struct scsi_qla_host *);
+       int (*beacon_off) (struct scsi_qla_host *);
+       void (*beacon_blink) (struct scsi_qla_host *);
+
+       uint8_t * (*read_optrom) (struct scsi_qla_host *, uint8_t *,
+               uint32_t, uint32_t);
+       int (*write_optrom) (struct scsi_qla_host *, uint8_t *, uint32_t,
+               uint32_t);
 };
 
 /*
@@ -2270,6 +2291,7 @@ typedef struct scsi_qla_host {
 #define LOOP_RESET_NEEDED      24
 #define BEACON_BLINK_NEEDED    25
 #define REGISTER_FDMI_NEEDED   26
+#define FCPORT_UPDATE_NEEDED   27
 
        uint32_t        device_flags;
 #define DFLG_LOCAL_DEVICES             BIT_0
@@ -2329,6 +2351,10 @@ typedef struct scsi_qla_host {
        uint16_t        min_external_loopid;    /* First external loop Id */
 
        uint16_t        link_data_rate;         /* F/W operating speed */
+#define LDR_1GB                0
+#define LDR_2GB                1
+#define LDR_4GB                3
+#define LDR_UNKNOWN    0xFFFF
 
        uint8_t         current_topology;
        uint8_t         prev_topology;
@@ -2484,12 +2510,26 @@ typedef struct scsi_qla_host {
        uint8_t         *port_name;
        uint32_t    isp_abort_cnt;
 
+       /* Option ROM information. */
+       char            *optrom_buffer;
+       uint32_t        optrom_size;
+       int             optrom_state;
+#define QLA_SWAITING   0
+#define QLA_SREADING   1
+#define QLA_SWRITING   2
+
        /* Needed for BEACON */
        uint16_t        beacon_blink_led;
-       uint16_t        beacon_green_on;
+       uint8_t         beacon_color_state;
+#define QLA_LED_GRN_ON         0x01
+#define QLA_LED_YLW_ON         0x02
+#define QLA_LED_ABR_ON         0x04
+#define QLA_LED_ALL_ON         0x07    /* yellow, green, amber. */
+                                       /* ISP2322: red, green, amber. */
 
        uint16_t        zio_mode;
        uint16_t        zio_timer;
+       struct fc_host_statistics fc_host_stat;
 } scsi_qla_host_t;
 
 
@@ -2555,7 +2595,9 @@ struct _qla2x00stats  {
 /*
  * Flash support definitions
  */
-#define FLASH_IMAGE_SIZE       131072
+#define OPTROM_SIZE_2300       0x20000
+#define OPTROM_SIZE_2322       0x100000
+#define OPTROM_SIZE_24XX       0x100000
 
 #include "qla_gbl.h"
 #include "qla_dbg.h"