#include <linux/delay.h>
#include <linux/vmalloc.h>
-#include <linux/firmware.h>
#include <scsi/scsi_transport_fc.h>
#include "qla_devtbl.h"
static int qla2x00_configure_hba(scsi_qla_host_t *);
static int qla2x00_configure_loop(scsi_qla_host_t *);
static int qla2x00_configure_local_loop(scsi_qla_host_t *);
-static void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
static int qla2x00_configure_fabric(scsi_qla_host_t *);
static int qla2x00_find_all_fabric_devs(scsi_qla_host_t *, struct list_head *);
static int qla2x00_device_resync(scsi_qla_host_t *);
int rval;
/* Update Serial Link options. */
- if ((ha->fw_seriallink_options24[0] & BIT_0) == 0)
+ if ((le16_to_cpu(ha->fw_seriallink_options24[0]) & BIT_0) == 0)
return;
- rval = qla2x00_set_serdes_params(ha, ha->fw_seriallink_options24[1],
- ha->fw_seriallink_options24[2], ha->fw_seriallink_options24[3]);
+ rval = qla2x00_set_serdes_params(ha,
+ le16_to_cpu(ha->fw_seriallink_options24[1]),
+ le16_to_cpu(ha->fw_seriallink_options24[2]),
+ le16_to_cpu(ha->fw_seriallink_options24[3]));
if (rval != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha,
"Unable to update Serial Link options (%x).\n", rval);
rval = qla2x00_get_adapter_id(ha,
&loop_id, &al_pa, &area, &domain, &topo);
if (rval != QLA_SUCCESS) {
- if (LOOP_NOT_READY(ha) || atomic_read(&ha->loop_down_timer) ||
+ if (LOOP_TRANSITION(ha) || atomic_read(&ha->loop_down_timer) ||
(rval == QLA_COMMAND_ERROR && loop_id == 0x7)) {
DEBUG2(printk("%s(%ld) Loop is in a transition state\n",
__func__, ha->host_no));
qla2x00_rport_del(void *data)
{
fc_port_t *fcport = data;
+ struct fc_rport *rport;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fcport->rport_lock, flags);
+ rport = fcport->drport;
+ fcport->drport = NULL;
+ spin_unlock_irqrestore(&fcport->rport_lock, flags);
+ if (rport)
+ fc_remote_port_delete(rport);
- if (fcport->rport)
- fc_remote_port_delete(fcport->rport);
- fcport->rport = NULL;
}
/**
atomic_set(&fcport->state, FCS_UNCONFIGURED);
fcport->flags = FCF_RLC_SUPPORT;
fcport->supported_classes = FC_COS_UNSPECIFIED;
+ spin_lock_init(&fcport->rport_lock);
INIT_WORK(&fcport->rport_add_work, qla2x00_rport_add, fcport);
INIT_WORK(&fcport->rport_del_work, qla2x00_rport_del, fcport);
}
if (rval == QLA_SUCCESS && test_bit(RSCN_UPDATE, &flags)) {
- if (LOOP_NOT_READY(ha)) {
+ if (LOOP_TRANSITION(ha)) {
rval = QLA_FUNCTION_FAILED;
} else {
rval = qla2x00_configure_fabric(ha);
"information -- get_port_database=%x, "
"loop_id=0x%04x\n",
ha->host_no, rval2, new_fcport->loop_id));
+ DEBUG2(printk("scsi(%ld): Scheduling resync...\n",
+ ha->host_no));
+ set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
continue;
}
{
fc_port_t *fcport;
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 0);
list_for_each_entry(fcport, &ha->fcports, list) {
if (fcport->port_type != FCT_TARGET)
continue;
* Context:
* Kernel context.
*/
-static void
+void
qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
{
- uint16_t index;
- unsigned long flags;
- srb_t *sp;
-
fcport->ha = ha;
fcport->login_retry = 0;
fcport->port_login_retry_count = ha->port_down_retry_count *
PORT_RETRY_TIME);
fcport->flags &= ~FCF_LOGIN_NEEDED;
- /*
- * Check for outstanding cmd on tape Bypass LUN discovery if active
- * command on tape.
- */
- if (fcport->flags & FCF_TAPE_PRESENT) {
- spin_lock_irqsave(&ha->hardware_lock, flags);
- for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
- fc_port_t *sfcp;
-
- if ((sp = ha->outstanding_cmds[index]) != 0) {
- sfcp = sp->fcport;
- if (sfcp == fcport) {
- atomic_set(&fcport->state, FCS_ONLINE);
- spin_unlock_irqrestore(
- &ha->hardware_lock, flags);
- return;
- }
- }
- }
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
- }
-
if (fcport->port_type == FCT_INITIATOR ||
fcport->port_type == FCT_BROADCAST)
fcport->device_type = TYPE_PROCESSOR;
{
struct fc_rport_identifiers rport_ids;
struct fc_rport *rport;
+ unsigned long flags;
- if (fcport->rport) {
- fc_remote_port_delete(fcport->rport);
- fcport->rport = NULL;
- }
+ if (fcport->drport)
+ qla2x00_rport_del(fcport);
+ if (fcport->rport)
+ return;
rport_ids.node_name = wwn_to_u64(fcport->node_name);
rport_ids.port_name = wwn_to_u64(fcport->port_name);
rport_ids.port_id = fcport->d_id.b.domain << 16 |
fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa;
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
- fcport->rport = rport = fc_remote_port_add(ha->host, 0, &rport_ids);
+ rport = fc_remote_port_add(ha->host, 0, &rport_ids);
if (!rport) {
qla_printk(KERN_WARNING, ha,
"Unable to allocate fc remote port!\n");
return;
}
+ spin_lock_irqsave(&fcport->rport_lock, flags);
+ fcport->rport = rport;
*((fc_port_t **)rport->dd_data) = fcport;
+ spin_unlock_irqrestore(&fcport->rport_lock, flags);
+
rport->supported_classes = fcport->supported_classes;
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
qla2x00_mark_device_lost(ha, fcport,
- ql2xplogiabsentdevice);
+ ql2xplogiabsentdevice, 0);
if (fcport->loop_id != FC_NO_LOOP_ID &&
(fcport->flags & FCF_TAPE_PRESENT) == 0 &&
fcport->port_type != FCT_INITIATOR &&
fcport->port_type != FCT_BROADCAST) {
-
ha->isp_ops.fabric_logout(ha,
fcport->loop_id,
fcport->d_id.b.domain,
if (qla2x00_is_reserved_id(ha, loop_id))
continue;
- if (atomic_read(&ha->loop_down_timer) || LOOP_NOT_READY(ha))
+ if (atomic_read(&ha->loop_down_timer) || LOOP_TRANSITION(ha))
break;
if (swl != NULL) {
switch (format) {
case 0:
- if (!IS_QLA2100(ha) && !IS_QLA2200(ha) &&
+ if (ql2xprocessrscn &&
+ !IS_QLA2100(ha) && !IS_QLA2200(ha) &&
!IS_QLA6312(ha) && !IS_QLA6322(ha) &&
!IS_QLA24XX(ha) && !IS_QLA25XX(ha) &&
ha->flags.init_done) {
if (atomic_read(&fcport->state) == FCS_ONLINE) {
if (format != 3 ||
fcport->port_type != FCT_INITIATOR) {
- qla2x00_mark_device_lost(ha, fcport, 0);
+ qla2x00_mark_device_lost(ha, fcport,
+ 0, 0);
}
}
fcport->flags &= ~FCF_FARP_DONE;
ha->isp_ops.fabric_logout(ha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
- qla2x00_mark_device_lost(ha, fcport, 1);
-
+ qla2x00_mark_device_lost(ha, fcport, 1, 0);
} else {
qla2x00_update_fcport(ha, fcport);
}
ha->isp_ops.fabric_logout(ha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
- qla2x00_mark_device_lost(ha, fcport, 1);
+ qla2x00_mark_device_lost(ha, fcport, 1, 0);
rval = 1;
break;
qla2x00_probe_for_all_luns(ha);
}
+void
+qla2x00_update_fcports(scsi_qla_host_t *ha)
+{
+ fc_port_t *fcport;
+
+ /* Go with deferred removal of rport references. */
+ list_for_each_entry(fcport, &ha->fcports, list)
+ if (fcport->drport)
+ qla2x00_rport_del(fcport);
+}
+
/*
* qla2x00_abort_isp
* Resets ISP and aborts all outstanding commands.
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 0);
} else {
if (!atomic_read(&ha->loop_down_timer))
atomic_set(&ha->loop_down_timer,
ha->node_name = icb->node_name;
ha->port_name = icb->port_name;
+ icb->execution_throttle = __constant_cpu_to_le16(0xFFFF);
+
ha->retry_count = le16_to_cpu(nv->login_retry_count);
/* Set minimum login_timeout to 4 seconds. */
return (rval);
}
+#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
+
int
qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
{
- int rval;
- uint16_t cnt;
- uint16_t *risc_code;
- unsigned long risc_address;
- unsigned long risc_code_size;
- int num;
- int i;
- uint16_t *req_ring;
+ int rval, num, i;
+ uint32_t cnt;
+ uint16_t *risc_code;
+ uint32_t risc_addr, risc_size;
+ uint16_t *req_ring;
struct qla_fw_info *fw_iter;
rval = QLA_SUCCESS;
*srisc_addr = *ha->brd_info->fw_info->fwstart;
while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) {
risc_code = fw_iter->fwcode;
- risc_code_size = *fw_iter->fwlen;
-
- if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
- risc_address = *fw_iter->fwstart;
- } else {
- /* Extended address */
- risc_address = *fw_iter->lfwstart;
- }
+ risc_size = *fw_iter->fwlen;
+ if (fw_iter->addressing == FW_INFO_ADDR_NORMAL)
+ risc_addr = *fw_iter->fwstart;
+ else
+ risc_addr = *fw_iter->lfwstart;
num = 0;
rval = 0;
- while (risc_code_size > 0 && !rval) {
+ while (risc_size > 0 && !rval) {
cnt = (uint16_t)(ha->fw_transfer_size >> 1);
- if (cnt > risc_code_size)
- cnt = risc_code_size;
+ if (cnt > risc_size)
+ cnt = risc_size;
DEBUG7(printk("scsi(%ld): Loading risc segment@ "
"addr %p, number of bytes 0x%x, offset 0x%lx.\n",
- ha->host_no, risc_code, cnt, risc_address));
+ ha->host_no, risc_code, cnt, risc_addr));
req_ring = (uint16_t *)ha->request_ring;
for (i = 0; i < cnt; i++)
req_ring[i] = cpu_to_le16(risc_code[i]);
- if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
- rval = qla2x00_load_ram(ha, ha->request_dma,
- risc_address, cnt);
- } else {
- rval = qla2x00_load_ram_ext(ha,
- ha->request_dma, risc_address, cnt);
- }
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ cnt);
if (rval) {
DEBUG(printk("scsi(%ld): [ERROR] Failed to "
"load segment %d of firmware\n",
}
risc_code += cnt;
- risc_address += cnt;
- risc_code_size -= cnt;
+ risc_addr += cnt;
+ risc_size -= cnt;
num++;
}
/* Next firmware sequence */
fw_iter++;
}
+ return rval;
+}
- return (rval);
+int
+qla24xx_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval, num, i;
+ uint32_t cnt;
+ uint32_t *risc_code;
+ uint32_t risc_addr, risc_size;
+ uint32_t *req_ring;
+ struct qla_fw_info *fw_iter;
+
+ rval = QLA_SUCCESS;
+
+ /* Load firmware sequences */
+ fw_iter = ha->brd_info->fw_info;
+ *srisc_addr = *((uint32_t *)fw_iter->lfwstart);
+ while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) {
+ risc_code = (uint32_t *)fw_iter->fwcode;
+ risc_size = *((uint32_t *)fw_iter->fwlen);
+ risc_addr = *((uint32_t *)fw_iter->lfwstart);
+
+ num = 0;
+ rval = 0;
+ while (risc_size > 0 && !rval) {
+ cnt = (uint32_t)(ha->fw_transfer_size >> 2);
+ if (cnt > risc_size)
+ cnt = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ "
+ "addr %p, number of bytes 0x%x, offset 0x%lx.\n",
+ ha->host_no, risc_code, cnt, risc_addr));
+
+ req_ring = (uint32_t *)ha->request_ring;
+ for (i = 0; i < cnt; i++)
+ req_ring[i] = cpu_to_le32(risc_code[i]);
+
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ cnt);
+ if (rval) {
+ DEBUG(printk("scsi(%ld): [ERROR] Failed to "
+ "load segment %d of firmware\n",
+ ha->host_no, num));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", num);
+
+ qla2x00_dump_regs(ha);
+ break;
+ }
+
+ risc_code += cnt;
+ risc_addr += cnt;
+ risc_size -= cnt;
+ num++;
+ }
+
+ /* Next firmware sequence */
+ fw_iter++;
+ }
+ return rval;
}
int
for (i = 0; i < dlen; i++)
dcode[i] = swab32(dcode[i]);
- rval = qla2x00_load_ram_ext(ha, ha->request_dma,
- risc_addr, dlen);
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ dlen);
if (rval) {
DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
"segment %d of firmware\n", ha->host_no,
return rval;
}
+#else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */
+
int
-qla24xx_load_risc_hotplug(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval;
+ int i, fragment;
+ uint16_t *wcode, *fwcode;
+ uint32_t risc_addr, risc_size, fwclen, wlen, *seg;
+ struct fw_blob *blob;
+
+ /* Load firmware blob. */
+ blob = qla2x00_request_firmware(ha);
+ if (!blob) {
+ qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
+ return QLA_FUNCTION_FAILED;
+ }
+
+ rval = QLA_SUCCESS;
+
+ wcode = (uint16_t *)ha->request_ring;
+ *srisc_addr = 0;
+ fwcode = (uint16_t *)blob->fw->data;
+ fwclen = 0;
+
+ /* Validate firmware image by checking version. */
+ if (blob->fw->size < 8 * sizeof(uint16_t)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image (%Zd)!\n",
+ blob->fw->size);
+ goto fail_fw_integrity;
+ }
+ for (i = 0; i < 4; i++)
+ wcode[i] = be16_to_cpu(fwcode[i + 4]);
+ if ((wcode[0] == 0xffff && wcode[1] == 0xffff && wcode[2] == 0xffff &&
+ wcode[3] == 0xffff) || (wcode[0] == 0 && wcode[1] == 0 &&
+ wcode[2] == 0 && wcode[3] == 0)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image!\n");
+ qla_printk(KERN_WARNING, ha,
+ "Firmware data: %04x %04x %04x %04x!\n", wcode[0],
+ wcode[1], wcode[2], wcode[3]);
+ goto fail_fw_integrity;
+ }
+
+ seg = blob->segs;
+ while (*seg && rval == QLA_SUCCESS) {
+ risc_addr = *seg;
+ *srisc_addr = *srisc_addr == 0 ? *seg : *srisc_addr;
+ risc_size = be16_to_cpu(fwcode[3]);
+
+ /* Validate firmware image size. */
+ fwclen += risc_size * sizeof(uint16_t);
+ if (blob->fw->size < fwclen) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image "
+ "(%Zd)!\n", blob->fw->size);
+ goto fail_fw_integrity;
+ }
+
+ fragment = 0;
+ while (risc_size > 0 && rval == QLA_SUCCESS) {
+ wlen = (uint16_t)(ha->fw_transfer_size >> 1);
+ if (wlen > risc_size)
+ wlen = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
+ "addr %x, number of words 0x%x.\n", ha->host_no,
+ risc_addr, wlen));
+
+ for (i = 0; i < wlen; i++)
+ wcode[i] = swab16(fwcode[i]);
+
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ wlen);
+ if (rval) {
+ DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
+ "segment %d of firmware\n", ha->host_no,
+ fragment));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", fragment);
+ break;
+ }
+
+ fwcode += wlen;
+ risc_addr += wlen;
+ risc_size -= wlen;
+ fragment++;
+ }
+
+ /* Next segment. */
+ seg++;
+ }
+ return rval;
+
+fail_fw_integrity:
+ return QLA_FUNCTION_FAILED;
+}
+
+int
+qla24xx_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
{
int rval;
int segments, fragment;
uint32_t risc_addr;
uint32_t risc_size;
uint32_t i;
- const struct firmware *fw_entry;
+ struct fw_blob *blob;
uint32_t *fwcode, fwclen;
- if (request_firmware(&fw_entry, ha->brd_info->fw_fname,
- &ha->pdev->dev)) {
- qla_printk(KERN_ERR, ha,
- "Firmware image file not available: '%s'\n",
- ha->brd_info->fw_fname);
+ /* Load firmware blob. */
+ blob = qla2x00_request_firmware(ha);
+ if (!blob) {
+ qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
return QLA_FUNCTION_FAILED;
}
segments = FA_RISC_CODE_SEGMENTS;
dcode = (uint32_t *)ha->request_ring;
*srisc_addr = 0;
- fwcode = (uint32_t *)fw_entry->data;
+ fwcode = (uint32_t *)blob->fw->data;
fwclen = 0;
/* Validate firmware image by checking version. */
- if (fw_entry->size < 8 * sizeof(uint32_t)) {
+ if (blob->fw->size < 8 * sizeof(uint32_t)) {
qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of flash firmware image "
- "(%Zd)!\n", fw_entry->size);
+ "Unable to verify integrity of firmware image (%Zd)!\n",
+ blob->fw->size);
goto fail_fw_integrity;
}
for (i = 0; i < 4; i++)
(dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
dcode[3] == 0)) {
qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of flash firmware image!\n");
+ "Unable to verify integrity of firmware image!\n");
qla_printk(KERN_WARNING, ha,
"Firmware data: %08x %08x %08x %08x!\n", dcode[0],
dcode[1], dcode[2], dcode[3]);
/* Validate firmware image size. */
fwclen += risc_size * sizeof(uint32_t);
- if (fw_entry->size < fwclen) {
+ if (blob->fw->size < fwclen) {
qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of flash firmware "
- "image (%Zd)!\n", fw_entry->size);
+ "Unable to verify integrity of firmware image "
+ "(%Zd)!\n", blob->fw->size);
+
goto fail_fw_integrity;
}
for (i = 0; i < dlen; i++)
dcode[i] = swab32(fwcode[i]);
- rval = qla2x00_load_ram_ext(ha, ha->request_dma,
- risc_addr, dlen);
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ dlen);
if (rval) {
DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
"segment %d of firmware\n", ha->host_no,
/* Next segment. */
segments--;
}
-
- release_firmware(fw_entry);
return rval;
fail_fw_integrity:
-
- release_firmware(fw_entry);
return QLA_FUNCTION_FAILED;
-
}
+#endif
projects / linux-2.6-omap-h63xx.git / blobdiff