* global variable (boot or module load time) settings.
*
* A specific LUN is scanned via an INQUIRY command; if the LUN has a
- * device attached, a Scsi_Device is allocated and setup for it.
+ * device attached, a scsi_device is allocated and setup for it.
*
* For every id of every channel on the given host:
*
* device or storage attached to LUN 0):
*
* If LUN 0 has a device attached, allocate and setup a
- * Scsi_Device for it.
+ * scsi_device for it.
*
* If target is SCSI-3 or up, issue a REPORT LUN, and scan
* all of the LUNs returned by the REPORT LUN; else,
#define SCSI_SCAN_TARGET_PRESENT 1
#define SCSI_SCAN_LUN_PRESENT 2
-static char *scsi_null_device_strs = "nullnullnullnull";
+static const char *scsi_null_device_strs = "nullnullnullnull";
#define MAX_SCSI_LUNS 512
/*
* if LLDD reports slave not present, don't clutter
* console with alloc failure messages
-
-
*/
if (ret == -ENXIO)
display_failure_msg = 0;
out_device_destroy:
transport_destroy_device(&sdev->sdev_gendev);
- scsi_free_queue(sdev->request_queue);
put_device(&sdev->sdev_gendev);
out:
if (display_failure_msg)
*
* If the INQUIRY is successful, zero is returned and the
* INQUIRY data is in @inq_result; the scsi_level and INQUIRY length
- * are copied to the Scsi_Device any flags value is stored in *@bflags.
+ * are copied to the scsi_device any flags value is stored in *@bflags.
**/
static int scsi_probe_lun(struct scsi_device *sdev, char *inq_result,
int result_len, int *bflags)
/*
* Get any flags for this device.
*
- * XXX add a bflags to Scsi_Device, and replace the
- * corresponding bit fields in Scsi_Device, so bflags
+ * XXX add a bflags to scsi_device, and replace the
+ * corresponding bit fields in scsi_device, so bflags
* need not be passed as an argument.
*/
*bflags = scsi_get_device_flags(sdev, &inq_result[8],
}
/**
- * scsi_add_lun - allocate and fully initialze a Scsi_Device
- * @sdevscan: holds information to be stored in the new Scsi_Device
- * @sdevnew: store the address of the newly allocated Scsi_Device
+ * scsi_add_lun - allocate and fully initialze a scsi_device
+ * @sdevscan: holds information to be stored in the new scsi_device
+ * @sdevnew: store the address of the newly allocated scsi_device
* @inq_result: holds the result of a previous INQUIRY to the LUN
* @bflags: black/white list flag
*
* Description:
- * Allocate and initialize a Scsi_Device matching sdevscan. Optionally
+ * Allocate and initialize a scsi_device matching sdevscan. Optionally
* set fields based on values in *@bflags. If @sdevnew is not
- * NULL, store the address of the new Scsi_Device in *@sdevnew (needed
+ * NULL, store the address of the new scsi_device in *@sdevnew (needed
* when scanning a particular LUN).
*
* Return:
- * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a Scsi_Device
- * SCSI_SCAN_LUN_PRESENT: a new Scsi_Device was allocated and initialized
+ * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device
+ * SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized
**/
static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags)
{
*
* The above is vague, as it implies that we could treat 001 and
* 011 the same. Stay compatible with previous code, and create a
- * Scsi_Device for a PQ of 1
+ * scsi_device for a PQ of 1
*
* Don't set the device offline here; rather let the upper
* level drivers eval the PQ to decide whether they should
* scsi_probe_and_add_lun - probe a LUN, if a LUN is found add it
* @starget: pointer to target device structure
* @lun: LUN of target device
- * @sdevscan: probe the LUN corresponding to this Scsi_Device
- * @sdevnew: store the value of any new Scsi_Device allocated
+ * @sdevscan: probe the LUN corresponding to this scsi_device
+ * @sdevnew: store the value of any new scsi_device allocated
* @bflagsp: store bflags here if not NULL
*
* Description:
* allocate and set it up by calling scsi_add_lun.
*
* Return:
- * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a Scsi_Device
+ * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device
* SCSI_SCAN_TARGET_PRESENT: target responded, but no device is
* attached at the LUN
- * SCSI_SCAN_LUN_PRESENT: a new Scsi_Device was allocated and initialized
+ * SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized
**/
static int scsi_probe_and_add_lun(struct scsi_target *starget,
uint lun, int *bflagsp,
/**
* scsi_report_lun_scan - Scan using SCSI REPORT LUN results
- * @sdevscan: scan the host, channel, and id of this Scsi_Device
+ * @sdevscan: scan the host, channel, and id of this scsi_device
*
* Description:
* If @sdevscan is for a SCSI-3 or up device, send a REPORT LUN
struct scsi_sense_hdr sshdr;
struct scsi_device *sdev;
struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+ int ret = 0;
/*
* Only support SCSI-3 and up devices if BLIST_NOREPORTLUN is not set.
/*
* The device probably does not support a REPORT LUN command
*/
- kfree(lun_data);
- return 1;
+ ret = 1;
+ goto out_err;
}
/*
}
}
+ out_err:
kfree(lun_data);
out:
scsi_device_put(sdev);
* the sdev we used didn't appear in the report luns scan
*/
scsi_destroy_sdev(sdev);
- return 0;
+ return ret;
}
struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel,
/*
* Function: scsi_get_host_dev()
*
- * Purpose: Create a Scsi_Device that points to the host adapter itself.
+ * Purpose: Create a scsi_device that points to the host adapter itself.
*
- * Arguments: SHpnt - Host that needs a Scsi_Device
+ * Arguments: SHpnt - Host that needs a scsi_device
*
* Lock status: None assumed.
*
- * Returns: The Scsi_Device or NULL
+ * Returns: The scsi_device or NULL
*
* Notes:
- * Attach a single Scsi_Device to the Scsi_Host - this should
+ * Attach a single scsi_device to the Scsi_Host - this should
* be made to look like a "pseudo-device" that points to the
* HA itself.
*
*
* Purpose: Free a scsi_device that points to the host adapter itself.
*
- * Arguments: SHpnt - Host that needs a Scsi_Device
+ * Arguments: SHpnt - Host that needs a scsi_device
*
* Lock status: None assumed.
*
projects / linux-2.6-omap-h63xx.git / blobdiff