* Needed function prototypes.
*/
static void sym_int_ma (struct sym_hcb *np);
-static void sym_int_sir (struct sym_hcb *np);
+static void sym_int_sir(struct sym_hcb *);
static struct sym_ccb *sym_alloc_ccb(struct sym_hcb *np);
static struct sym_ccb *sym_ccb_from_dsa(struct sym_hcb *np, u32 dsa);
static void sym_alloc_lcb_tags (struct sym_hcb *np, u_char tn, u_char ln);
*/
static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, struct sym_nvram *nvram)
{
+ struct sym_data *sym_data = shost_priv(shost);
+ struct pci_dev *pdev = sym_data->pdev;
u_char burst_max;
u32 period;
int i;
* 64 bit addressing (895A/896/1010) ?
*/
if (np->features & FE_DAC) {
-#if SYM_CONF_DMA_ADDRESSING_MODE == 0
- np->rv_ccntl1 |= (DDAC);
-#elif SYM_CONF_DMA_ADDRESSING_MODE == 1
- if (!np->use_dac)
- np->rv_ccntl1 |= (DDAC);
- else
- np->rv_ccntl1 |= (XTIMOD | EXTIBMV);
-#elif SYM_CONF_DMA_ADDRESSING_MODE == 2
- if (!np->use_dac)
- np->rv_ccntl1 |= (DDAC);
- else
- np->rv_ccntl1 |= (0 | EXTIBMV);
-#endif
+ if (!use_dac(np))
+ np->rv_ccntl1 |= (DDAC);
+ else if (SYM_CONF_DMA_ADDRESSING_MODE == 1)
+ np->rv_ccntl1 |= (XTIMOD | EXTIBMV);
+ else if (SYM_CONF_DMA_ADDRESSING_MODE == 2)
+ np->rv_ccntl1 |= (0 | EXTIBMV);
}
/*
* In dual channel mode, contention occurs if internal cycles
* are used. Disable internal cycles.
*/
- if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
- np->revision_id < 0x1)
+ if (pdev->device == PCI_DEVICE_ID_LSI_53C1010_33 &&
+ pdev->revision < 0x1)
np->rv_ccntl0 |= DILS;
/*
* this driver. The generic ncr driver that does not use
* LOAD/STORE instructions does not need this work-around.
*/
- if ((np->device_id == PCI_DEVICE_ID_NCR_53C810 &&
- np->revision_id >= 0x10 && np->revision_id <= 0x11) ||
- (np->device_id == PCI_DEVICE_ID_NCR_53C860 &&
- np->revision_id <= 0x1))
+ if ((pdev->device == PCI_DEVICE_ID_NCR_53C810 &&
+ pdev->revision >= 0x10 && pdev->revision <= 0x11) ||
+ (pdev->device == PCI_DEVICE_ID_NCR_53C860 &&
+ pdev->revision <= 0x1))
np->features &= ~(FE_WRIE|FE_ERL|FE_ERMP);
/*
if ((SYM_SETUP_SCSI_LED ||
(nvram->type == SYM_SYMBIOS_NVRAM ||
(nvram->type == SYM_TEKRAM_NVRAM &&
- np->device_id == PCI_DEVICE_ID_NCR_53C895))) &&
+ pdev->device == PCI_DEVICE_ID_NCR_53C895))) &&
!(np->features & FE_LEDC) && !(np->sv_gpcntl & 0x01))
np->features |= FE_LED0;
* First 24 register of the chip:
* r0..rf
*/
-static void sym_log_hard_error(struct sym_hcb *np, u_short sist, u_char dstat)
+static void sym_log_hard_error(struct Scsi_Host *shost, u_short sist, u_char dstat)
{
+ struct sym_hcb *np = sym_get_hcb(shost);
u32 dsp;
int script_ofs;
int script_size;
scr_to_cpu((int) *(u32 *)(script_base + script_ofs)));
}
- printf ("%s: regdump:", sym_name(np));
- for (i=0; i<24;i++)
- printf (" %02x", (unsigned)INB_OFF(np, i));
- printf (".\n");
+ printf("%s: regdump:", sym_name(np));
+ for (i = 0; i < 24; i++)
+ printf(" %02x", (unsigned)INB_OFF(np, i));
+ printf(".\n");
/*
* PCI BUS error.
*/
if (dstat & (MDPE|BF))
- sym_log_bus_error(np);
+ sym_log_bus_error(shost);
+}
+
+void sym_dump_registers(struct Scsi_Host *shost)
+{
+ struct sym_hcb *np = sym_get_hcb(shost);
+ u_short sist;
+ u_char dstat;
+
+ sist = INW(np, nc_sist);
+ dstat = INB(np, nc_dstat);
+ sym_log_hard_error(shost, sist, dstat);
}
static struct sym_chip sym_dev_table[] = {
{
int i;
- if (!np->use_dac)
+ if (!use_dac(np))
goto weird;
/* Look up existing mappings */
np->squeueput = qidx;
if (DEBUG_FLAGS & DEBUG_QUEUE)
- printf ("%s: queuepos=%d.\n", sym_name (np), np->squeueput);
+ scmd_printk(KERN_DEBUG, cp->cmd, "queuepos=%d\n",
+ np->squeueput);
/*
* Script processor may be waiting for reselect.
SYM_QUEHEAD *qp;
struct sym_ccb *cp;
- while ((qp = sym_remque_head(&np->comp_ccbq)) != 0) {
+ while ((qp = sym_remque_head(&np->comp_ccbq)) != NULL) {
struct scsi_cmnd *cmd;
cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq);
* 1: SCSI BUS RESET delivered or received.
* 2: SCSI BUS MODE changed.
*/
-void sym_start_up (struct sym_hcb *np, int reason)
+void sym_start_up(struct Scsi_Host *shost, int reason)
{
+ struct sym_data *sym_data = shost_priv(shost);
+ struct pci_dev *pdev = sym_data->pdev;
+ struct sym_hcb *np = sym_data->ncb;
int i;
u32 phys;
* This also let point to first position the start
* and done queue pointers used from SCRIPTS.
*/
- np->fw_patch(np);
+ np->fw_patch(shost);
/*
* Wakeup all pending jobs.
/*
* For now, disable AIP generation on C1010-66.
*/
- if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_66)
+ if (pdev->device == PCI_DEVICE_ID_LSI_53C1010_66)
OUTB(np, nc_aipcntl1, DISAIP);
/*
* that from SCRIPTS for each selection/reselection, but
* I just don't want. :)
*/
- if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
- np->revision_id < 1)
+ if (pdev->device == PCI_DEVICE_ID_LSI_53C1010_33 &&
+ pdev->revision < 1)
OUTB(np, nc_stest1, INB(np, nc_stest1) | 0x30);
/*
* Disable overlapped arbitration for some dual function devices,
* regardless revision id (kind of post-chip-design feature. ;-))
*/
- if (np->device_id == PCI_DEVICE_ID_NCR_53C875)
+ if (pdev->device == PCI_DEVICE_ID_NCR_53C875)
OUTB(np, nc_ctest0, (1<<5));
- else if (np->device_id == PCI_DEVICE_ID_NCR_53C896)
+ else if (pdev->device == PCI_DEVICE_ID_NCR_53C896)
np->rv_ccntl0 |= DPR;
/*
* Set up scratch C and DRS IO registers to map the 32 bit
* DMA address range our data structures are located in.
*/
- if (np->use_dac) {
+ if (use_dac(np)) {
np->dmap_bah[0] = 0; /* ??? */
OUTL(np, nc_scrx[0], np->dmap_bah[0]);
OUTL(np, nc_drs, np->dmap_bah[0]);
if (sym_verbose >= 2)
printf("%s: Downloading SCSI SCRIPTS.\n", sym_name(np));
memcpy_toio(np->s.ramaddr, np->scripta0, np->scripta_sz);
- if (np->ram_ws == 8192) {
+ if (np->features & FE_RAM8K) {
memcpy_toio(np->s.ramaddr + 4096, np->scriptb0, np->scriptb_sz);
phys = scr_to_cpu(np->scr_ram_seg);
OUTL(np, nc_mmws, phys);
* mode to eight bit asynchronous, etc...
* So, just reinitializing all except chip should be enough.
*/
-static void sym_int_sbmc (struct sym_hcb *np)
+static void sym_int_sbmc(struct Scsi_Host *shost)
{
+ struct sym_hcb *np = sym_get_hcb(shost);
u_char scsi_mode = INB(np, nc_stest4) & SMODE;
/*
* Should suspend command processing for a few seconds and
* reinitialize all except the chip.
*/
- sym_start_up (np, 2);
+ sym_start_up(shost, 2);
}
/*
* Use at your own decision and risk.
*/
-void sym_interrupt (struct sym_hcb *np)
+irqreturn_t sym_interrupt(struct Scsi_Host *shost)
{
+ struct sym_data *sym_data = shost_priv(shost);
+ struct sym_hcb *np = sym_data->ncb;
+ struct pci_dev *pdev = sym_data->pdev;
u_char istat, istatc;
u_char dstat;
u_short sist;
istat = INB(np, nc_istat);
if (istat & INTF) {
OUTB(np, nc_istat, (istat & SIGP) | INTF | np->istat_sem);
- istat = INB(np, nc_istat); /* DUMMY READ */
+ istat |= INB(np, nc_istat); /* DUMMY READ */
if (DEBUG_FLAGS & DEBUG_TINY) printf ("F ");
sym_wakeup_done(np);
}
if (!(istat & (SIP|DIP)))
- return;
+ return (istat & INTF) ? IRQ_HANDLED : IRQ_NONE;
#if 0 /* We should never get this one */
if (istat & CABRT)
dstat |= INB(np, nc_dstat);
istatc = INB(np, nc_istat);
istat |= istatc;
+
+ /* Prevent deadlock waiting on a condition that may
+ * never clear. */
+ if (unlikely(sist == 0xffff && dstat == 0xff)) {
+ if (pci_channel_offline(pdev))
+ return IRQ_NONE;
+ }
} while (istatc & (SIP|DIP));
if (DEBUG_FLAGS & DEBUG_TINY)
!(dstat & (MDPE|BF|ABRT|IID))) {
if (sist & PAR) sym_int_par (np, sist);
else if (sist & MA) sym_int_ma (np);
- else if (dstat & SIR) sym_int_sir (np);
+ else if (dstat & SIR) sym_int_sir(np);
else if (dstat & SSI) OUTONB_STD();
else goto unknown_int;
- return;
+ return IRQ_HANDLED;
}
/*
*/
if (sist & RST) {
printf("%s: SCSI BUS reset detected.\n", sym_name(np));
- sym_start_up (np, 1);
- return;
+ sym_start_up(shost, 1);
+ return IRQ_HANDLED;
}
OUTB(np, nc_ctest3, np->rv_ctest3 | CLF); /* clear dma fifo */
if (!(sist & (GEN|HTH|SGE)) &&
!(dstat & (MDPE|BF|ABRT|IID))) {
- if (sist & SBMC) sym_int_sbmc (np);
+ if (sist & SBMC) sym_int_sbmc(shost);
else if (sist & STO) sym_int_sto (np);
else if (sist & UDC) sym_int_udc (np);
else goto unknown_int;
- return;
+ return IRQ_HANDLED;
}
/*
* Reset everything.
*/
- sym_log_hard_error(np, sist, dstat);
+ sym_log_hard_error(shost, sist, dstat);
if ((sist & (GEN|HTH|SGE)) ||
(dstat & (MDPE|BF|ABRT|IID))) {
sym_start_reset(np);
- return;
+ return IRQ_HANDLED;
}
unknown_int:
printf( "%s: unknown interrupt(s) ignored, "
"ISTAT=0x%x DSTAT=0x%x SIST=0x%x\n",
sym_name(np), istat, dstat, sist);
+ return IRQ_NONE;
}
/*
* the COMP queue and put back other ones into
* the BUSY queue.
*/
- while ((qp = sym_remque_head(&qtmp)) != 0) {
+ while ((qp = sym_remque_head(&qtmp)) != NULL) {
struct scsi_cmnd *cmd;
cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
cmd = cp->cmd;
* If we sent a BDR, make upper layer aware of that.
*/
if (np->abrt_msg[0] == M_RESET)
- sym_xpt_async_sent_bdr(np, target);
+ starget_printk(KERN_NOTICE, starget,
+ "has been reset\n");
break;
}
if (cp->startp == cp->phys.head.lastp ||
sym_evaluate_dp(np, cp, scr_to_cpu(cp->phys.head.lastp),
&dp_ofs) < 0) {
- return cp->data_len;
+ return cp->data_len - cp->odd_byte_adjustment;
}
/*
/*
* chip exception handler for programmed interrupts.
*/
-static void sym_int_sir (struct sym_hcb *np)
+static void sym_int_sir(struct sym_hcb *np)
{
u_char num = INB(np, nc_dsps);
u32 dsa = INL(np, nc_dsa);
return;
/*
* The device didn't go to MSG OUT phase after having
- * been selected with ATN. We donnot want to handle
- * that.
+ * been selected with ATN. We do not want to handle that.
*/
case SIR_SEL_ATN_NO_MSG_OUT:
- printf ("%s:%d: No MSG OUT phase after selection with ATN.\n",
- sym_name (np), target);
+ scmd_printk(KERN_WARNING, cp->cmd,
+ "No MSG OUT phase after selection with ATN\n");
goto out_stuck;
/*
* The device didn't switch to MSG IN phase after
- * having reseleted the initiator.
+ * having reselected the initiator.
*/
case SIR_RESEL_NO_MSG_IN:
- printf ("%s:%d: No MSG IN phase after reselection.\n",
- sym_name (np), target);
+ scmd_printk(KERN_WARNING, cp->cmd,
+ "No MSG IN phase after reselection\n");
goto out_stuck;
/*
* After reselection, the device sent a message that wasn't
* an IDENTIFY.
*/
case SIR_RESEL_NO_IDENTIFY:
- printf ("%s:%d: No IDENTIFY after reselection.\n",
- sym_name (np), target);
+ scmd_printk(KERN_WARNING, cp->cmd,
+ "No IDENTIFY after reselection\n");
goto out_stuck;
/*
- * The device reselected a LUN we donnot know about.
+ * The device reselected a LUN we do not know about.
*/
case SIR_RESEL_BAD_LUN:
np->msgout[0] = M_RESET;
np->msgout[0] = M_ABORT;
goto out;
/*
- * The device reselected for a tagged nexus that we donnot
- * have.
+ * The device reselected for a tagged nexus that we do not have.
*/
case SIR_RESEL_BAD_I_T_L_Q:
np->msgout[0] = M_ABORT_TAG;
case SIR_RESEL_ABORTED:
np->lastmsg = np->msgout[0];
np->msgout[0] = M_NOOP;
- printf ("%s:%d: message %x sent on bad reselection.\n",
- sym_name (np), target, np->lastmsg);
+ scmd_printk(KERN_WARNING, cp->cmd,
+ "message %x sent on bad reselection\n", np->lastmsg);
goto out;
/*
* The SCRIPTS let us know that a message has been
np->scriptz_ba = vtobus(np->scriptz0);
if (np->ram_ba) {
- np->scripta_ba = np->ram_ba;
+ np->scripta_ba = np->ram_ba;
if (np->features & FE_RAM8K) {
- np->ram_ws = 8192;
np->scriptb_ba = np->scripta_ba + 4096;
#if 0 /* May get useful for 64 BIT PCI addressing */
np->scr_ram_seg = cpu_to_scr(np->scripta_ba >> 32);
#endif
}
- else
- np->ram_ws = 4096;
}
/*
sym_mfree_dma(np->dqueue, sizeof(u32)*(MAX_QUEUE*2), "DQUEUE");
if (np->actccbs) {
- while ((qp = sym_remque_head(&np->free_ccbq)) != 0) {
+ while ((qp = sym_remque_head(&np->free_ccbq)) != NULL) {
cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
sym_mfree_dma(cp, sizeof(*cp), "CCB");
}
projects / linux-2.6-omap-h63xx.git / blobdiff