]> pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - drivers/serial/21285.c
Merge with /pub/scm/linux/kernel/git/torvalds/linux-2.6.git
[linux-2.6-omap-h63xx.git] / drivers / serial / 21285.c
index 0b10169961ebfe2898efecb192a00c5a47c4b1df..221999bcf8fe3809b943e4f11c53ba4529810f52 100644 (file)
@@ -58,8 +58,7 @@ static const char serial21285_name[] = "Footbridge UART";
  *  int((BAUD_BASE - (baud >> 1)) / baud)
  */
 
-static void
-serial21285_stop_tx(struct uart_port *port, unsigned int tty_stop)
+static void serial21285_stop_tx(struct uart_port *port)
 {
        if (tx_enabled(port)) {
                disable_irq(IRQ_CONTX);
@@ -67,8 +66,7 @@ serial21285_stop_tx(struct uart_port *port, unsigned int tty_stop)
        }
 }
 
-static void
-serial21285_start_tx(struct uart_port *port, unsigned int tty_start)
+static void serial21285_start_tx(struct uart_port *port)
 {
        if (!tx_enabled(port)) {
                enable_irq(IRQ_CONTX);
@@ -96,15 +94,6 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id, struct pt_regs *r
 
        status = *CSR_UARTFLG;
        while (!(status & 0x10) && max_count--) {
-               if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
-                       if (tty->low_latency)
-                               tty_flip_buffer_push(tty);
-                       /*
-                        * If this failed then we will throw away the
-                        * bytes but must do so to clear interrupts
-                        */
-               }
-
                ch = *CSR_UARTDR;
                flag = TTY_NORMAL;
                port->icount.rx++;
@@ -148,7 +137,7 @@ static irqreturn_t serial21285_tx_chars(int irq, void *dev_id, struct pt_regs *r
                goto out;
        }
        if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-               serial21285_stop_tx(port, 0);
+               serial21285_stop_tx(port);
                goto out;
        }
 
@@ -164,7 +153,7 @@ static irqreturn_t serial21285_tx_chars(int irq, void *dev_id, struct pt_regs *r
                uart_write_wakeup(port);
 
        if (uart_circ_empty(xmit))
-               serial21285_stop_tx(port, 0);
+               serial21285_stop_tx(port);
 
  out:
        return IRQ_HANDLED;
@@ -465,7 +454,7 @@ static int __init serial21285_console_setup(struct console *co, char *options)
        return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
-extern struct uart_driver serial21285_reg;
+static struct uart_driver serial21285_reg;
 
 static struct console serial21285_console =
 {