]> pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - drivers/serial/8250.c
[PATCH] Perle multimodem card (PCI-RAS) detection
[linux-2.6-omap-h63xx.git] / drivers / serial / 8250.c
index e34bd03cfce738c4d82ff34aae9718af1e53332d..2964ca9df5a010f9cebb264e4115d5a588e5c234 100644 (file)
@@ -920,12 +920,16 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 #ifdef __i386__
                outb(0xff, 0x080);
 #endif
-               scratch2 = serial_inp(up, UART_IER);
+               /*
+                * Mask out IER[7:4] bits for test as some UARTs (e.g. TL
+                * 16C754B) allow only to modify them if an EFR bit is set.
+                */
+               scratch2 = serial_inp(up, UART_IER) & 0x0f;
                serial_outp(up, UART_IER, 0x0F);
 #ifdef __i386__
                outb(0, 0x080);
 #endif
-               scratch3 = serial_inp(up, UART_IER);
+               scratch3 = serial_inp(up, UART_IER) & 0x0f;
                serial_outp(up, UART_IER, scratch);
                if (scratch2 != 0 || scratch3 != 0x0F) {
                        /*
@@ -1763,8 +1767,8 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int
 }
 
 static void
-serial8250_set_termios(struct uart_port *port, struct termios *termios,
-                      struct termios *old)
+serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
+                      struct ktermios *old)
 {
        struct uart_8250_port *up = (struct uart_8250_port *)port;
        unsigned char cval, fcr = 0;
@@ -2296,7 +2300,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
        local_irq_restore(flags);
 }
 
-static int serial8250_console_setup(struct console *co, char *options)
+static int __init serial8250_console_setup(struct console *co, char *options)
 {
        struct uart_port *port;
        int baud = 9600;