* required, these have to be supplied via some other means (eg, GPIO)
* and hooked into this driver.
*/
-#include <linux/config.h>
#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
writew(uap->im, uap->port.membase + UART011_IMSC);
}
-static void
-#ifdef SUPPORT_SYSRQ
-pl011_rx_chars(struct uart_amba_port *uap, struct pt_regs *regs)
-#else
-pl011_rx_chars(struct uart_amba_port *uap)
-#endif
+static void pl011_rx_chars(struct uart_amba_port *uap)
{
struct tty_struct *tty = uap->port.info->tty;
unsigned int status, ch, flag, max_count = 256;
flag = TTY_FRAME;
}
- if (uart_handle_sysrq_char(&uap->port, ch & 255, regs))
+ if (uart_handle_sysrq_char(&uap->port, ch & 255))
goto ignore_char;
uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
ignore_char:
status = readw(uap->port.membase + UART01x_FR);
}
+ spin_unlock(&uap->port.lock);
tty_flip_buffer_push(tty);
- return;
+ spin_lock(&uap->port.lock);
}
static void pl011_tx_chars(struct uart_amba_port *uap)
wake_up_interruptible(&uap->port.info->delta_msr_wait);
}
-static irqreturn_t pl011_int(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t pl011_int(int irq, void *dev_id)
{
struct uart_amba_port *uap = dev_id;
unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
uap->port.membase + UART011_ICR);
if (status & (UART011_RTIS|UART011_RXIS))
-#ifdef SUPPORT_SYSRQ
- pl011_rx_chars(uap, regs);
-#else
pl011_rx_chars(uap);
-#endif
if (status & (UART011_DSRMIS|UART011_DCDMIS|
UART011_CTSMIS|UART011_RIMIS))
pl011_modem_status(uap);
unsigned int result = 0;
unsigned int status = readw(uap->port.membase + UART01x_FR);
-#define BIT(uartbit, tiocmbit) \
+#define TIOCMBIT(uartbit, tiocmbit) \
if (status & uartbit) \
result |= tiocmbit
- BIT(UART01x_FR_DCD, TIOCM_CAR);
- BIT(UART01x_FR_DSR, TIOCM_DSR);
- BIT(UART01x_FR_CTS, TIOCM_CTS);
- BIT(UART011_FR_RI, TIOCM_RNG);
-#undef BIT
+ TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR);
+ TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR);
+ TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS);
+ TIOCMBIT(UART011_FR_RI, TIOCM_RNG);
+#undef TIOCMBIT
return result;
}
cr = readw(uap->port.membase + UART011_CR);
-#define BIT(tiocmbit, uartbit) \
+#define TIOCMBIT(tiocmbit, uartbit) \
if (mctrl & tiocmbit) \
cr |= uartbit; \
else \
cr &= ~uartbit
- BIT(TIOCM_RTS, UART011_CR_RTS);
- BIT(TIOCM_DTR, UART011_CR_DTR);
- BIT(TIOCM_OUT1, UART011_CR_OUT1);
- BIT(TIOCM_OUT2, UART011_CR_OUT2);
- BIT(TIOCM_LOOP, UART011_CR_LBE);
-#undef BIT
+ TIOCMBIT(TIOCM_RTS, UART011_CR_RTS);
+ TIOCMBIT(TIOCM_DTR, UART011_CR_DTR);
+ TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1);
+ TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2);
+ TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE);
+#undef TIOCMBIT
writew(cr, uap->port.membase + UART011_CR);
}
}
static void
-pl011_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+pl011_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int lcr_h, old_cr;
unsigned long flags;
if (co->index >= UART_NR)
co->index = 0;
uap = amba_ports[co->index];
+ if (!uap)
+ return -ENODEV;
uap->port.uartclk = clk_get_rate(uap->clk);
goto out;
}
- uap = kmalloc(sizeof(struct uart_amba_port), GFP_KERNEL);
+ uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL);
if (uap == NULL) {
ret = -ENOMEM;
goto out;
goto free;
}
- memset(uap, 0, sizeof(struct uart_amba_port));
uap->clk = clk_get(&dev->dev, "UARTCLK");
if (IS_ERR(uap->clk)) {
ret = PTR_ERR(uap->clk);