fix allmodconfig breakage

[linux-2.6-omap-h63xx.git] / drivers / serial / atmel_serial.c

diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 6aeef22bd2039ea41fbfc2cc6062dbb4c03cd83e..61fb8b6d19af77be5a9b180532725c22df68d44d 100644 (file)
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -42,11 +42,11 @@
 #include <asm/io.h>
 
 #include <asm/mach/serial_at91.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #ifdef CONFIG_ARM
-#include <asm/arch/cpu.h>
-#include <asm/arch/gpio.h>
+#include <mach/cpu.h>
+#include <mach/gpio.h>
 #endif
 
 #define PDC_BUFFER_SIZE                512
@@ -131,7 +131,8 @@ struct atmel_uart_char {
 struct atmel_uart_port {
        struct uart_port        uart;           /* uart */
        struct clk              *clk;           /* uart clock */
-       unsigned short          suspended;      /* is port suspended? */
+       int                     may_wakeup;     /* cached value of device_may_wakeup for times we need to disable it */
+       u32                     backup_imr;     /* IMR saved during suspend */
        int                     break_active;   /* break being received */
 
        short                   use_dma_rx;     /* enable PDC receiver */
@@ -662,14 +663,14 @@ static void atmel_rx_from_ring(struct uart_port *port)
         * uart_start(), which takes the lock.
         */
        spin_unlock(&port->lock);
-       tty_flip_buffer_push(port->info->tty);
+       tty_flip_buffer_push(port->info->port.tty);
        spin_lock(&port->lock);
 }
 
 static void atmel_rx_from_dma(struct uart_port *port)
 {
        struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-       struct tty_struct *tty = port->info->tty;
+       struct tty_struct *tty = port->info->port.tty;
        struct atmel_dma_buffer *pdc;
        int rx_idx = atmel_port->pdc_rx_idx;
        unsigned int head;
@@ -794,7 +795,7 @@ static void atmel_tasklet_func(unsigned long data)
 static int atmel_startup(struct uart_port *port)
 {
        struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-       struct tty_struct *tty = port->info->tty;
+       struct tty_struct *tty = port->info->port.tty;
        int retval;
 
        /*
@@ -955,6 +956,20 @@ static void atmel_shutdown(struct uart_port *port)
                atmel_close_hook(port);
 }
 
+/*
+ * Flush any TX data submitted for DMA. Called when the TX circular
+ * buffer is reset.
+ */
+static void atmel_flush_buffer(struct uart_port *port)
+{
+       struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+       if (atmel_use_dma_tx(port)) {
+               UART_PUT_TCR(port, 0);
+               atmel_port->pdc_tx.ofs = 0;
+       }
+}
+
 /*
  * Power / Clock management.
  */
@@ -970,8 +985,15 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
                 * This is called on uart_open() or a resume event.
                 */
                clk_enable(atmel_port->clk);
+
+               /* re-enable interrupts if we disabled some on suspend */
+               UART_PUT_IER(port, atmel_port->backup_imr);
                break;
        case 3:
+               /* Back up the interrupt mask and disable all interrupts */
+               atmel_port->backup_imr = UART_GET_IMR(port);
+               UART_PUT_IDR(port, -1);
+
                /*
                 * Disable the peripheral clock for this serial port.
                 * This is called on uart_close() or a suspend event.
@@ -1189,6 +1211,7 @@ static struct uart_ops atmel_pops = {
        .break_ctl      = atmel_break_ctl,
        .startup        = atmel_startup,
        .shutdown       = atmel_shutdown,
+       .flush_buffer   = atmel_flush_buffer,
        .set_termios    = atmel_set_termios,
        .type           = atmel_type,
        .release_port   = atmel_release_port,
@@ -1460,13 +1483,12 @@ static int atmel_serial_suspend(struct platform_device *pdev,
                        cpu_relax();
        }
 
-       if (device_may_wakeup(&pdev->dev)
-           && !atmel_serial_clk_will_stop())
-               enable_irq_wake(port->irq);
-       else {
-               uart_suspend_port(&atmel_uart, port);
-               atmel_port->suspended = 1;
-       }
+       /* we can not wake up if we're running on slow clock */
+       atmel_port->may_wakeup = device_may_wakeup(&pdev->dev);
+       if (atmel_serial_clk_will_stop())
+               device_set_wakeup_enable(&pdev->dev, 0);
+
+       uart_suspend_port(&atmel_uart, port);
 
        return 0;
 }
@@ -1476,11 +1498,8 @@ static int atmel_serial_resume(struct platform_device *pdev)
        struct uart_port *port = platform_get_drvdata(pdev);
        struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
-       if (atmel_port->suspended) {
-               uart_resume_port(&atmel_uart, port);
-               atmel_port->suspended = 0;
-       } else
-               disable_irq_wake(port->irq);
+       uart_resume_port(&atmel_uart, port);
+       device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup);
 
        return 0;
 }
@@ -1498,6 +1517,8 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
        BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
 
        port = &atmel_ports[pdev->id];
+       port->backup_imr = 0;
+
        atmel_init_port(port, pdev);
 
        if (!atmel_use_dma_rx(&port->uart)) {