* Created:
* Description: Driver for blackfin 5xx serial ports
*
- * Rev: $Id: bfin_5xx.c,v 1.19 2006/09/24 02:33:53 aubrey Exp $
- *
* Modified:
* Copyright 2006 Analog Devices Inc.
*
static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
{
- struct tty_struct *tty = uart->port.info?uart->port.info->tty:0;
+ struct tty_struct *tty = uart->port.info->tty;
unsigned int status, ch, flg;
#ifdef BF533_FAMILY
static int in_break = 0;
if (ch != 0) {
in_break = 0;
ch = UART_GET_CHAR(uart);
- }
- return;
+ if (bfin_revid() < 5)
+ return;
+ } else
+ return;
}
#endif
uart->port.icount.brk++;
if (uart_handle_break(&uart->port))
goto ignore_char;
- flg = TTY_BREAK;
- } else if (status & PE) {
- flg = TTY_PARITY;
+ status &= ~(PE | FE);
+ }
+ if (status & PE)
uart->port.icount.parity++;
- } else if (status & OE) {
- flg = TTY_OVERRUN;
+ if (status & OE)
uart->port.icount.overrun++;
- } else if (status & FE) {
- flg = TTY_FRAME;
+ if (status & FE)
uart->port.icount.frame++;
- } else
+
+ status &= uart->port.read_status_mask;
+
+ if (status & BI)
+ flg = TTY_BREAK;
+ else if (status & PE)
+ flg = TTY_PARITY;
+ else if (status & FE)
+ flg = TTY_FRAME;
+ else
flg = TTY_NORMAL;
if (uart_handle_sysrq_char(&uart->port, ch))
goto ignore_char;
- if (tty)
- uart_insert_char(&uart->port, status, 2, ch, flg);
-ignore_char:
- if (tty)
- tty_flip_buffer_push(tty);
+ uart_insert_char(&uart->port, status, OE, ch, flg);
+
+ ignore_char:
+ tty_flip_buffer_push(tty);
}
static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
bfin_serial_stop_tx(&uart->port);
}
-static irqreturn_t bfin_serial_int(int irq, void *dev_id)
+static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
{
struct bfin_serial_port *uart = dev_id;
- unsigned short status;
spin_lock(&uart->port.lock);
- status = UART_GET_IIR(uart);
- do {
- if ((status & IIR_STATUS) == IIR_TX_READY)
- bfin_serial_tx_chars(uart);
- if ((status & IIR_STATUS) == IIR_RX_READY)
- bfin_serial_rx_chars(uart);
- status = UART_GET_IIR(uart);
- } while (status & (IIR_TX_READY | IIR_RX_READY));
+ while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_RX_READY)
+ bfin_serial_rx_chars(uart);
+ spin_unlock(&uart->port.lock);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
+{
+ struct bfin_serial_port *uart = dev_id;
+
+ spin_lock(&uart->port.lock);
+ while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY)
+ bfin_serial_tx_chars(uart);
spin_unlock(&uart->port.lock);
return IRQ_HANDLED;
}
+
static void bfin_serial_do_work(struct work_struct *work)
{
struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue);
spin_unlock_irqrestore(&uart->port.lock, flags);
}
-static void bfin_serial_dma_rx_chars(struct bfin_serial_port * uart)
+static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
{
struct tty_struct *tty = uart->port.info->tty;
int i, flg, status;
uart->port.icount.brk++;
if (uart_handle_break(&uart->port))
goto dma_ignore_char;
- flg = TTY_BREAK;
- } else if (status & PE) {
- flg = TTY_PARITY;
+ status &= ~(PE | FE);
+ }
+ if (status & PE)
uart->port.icount.parity++;
- } else if (status & OE) {
- flg = TTY_OVERRUN;
+ if (status & OE)
uart->port.icount.overrun++;
- } else if (status & FE) {
- flg = TTY_FRAME;
+ if (status & FE)
uart->port.icount.frame++;
- } else
+
+ status &= uart->port.read_status_mask;
+
+ if (status & BI)
+ flg = TTY_BREAK;
+ else if (status & PE)
+ flg = TTY_PARITY;
+ else if (status & FE)
+ flg = TTY_FRAME;
+ else
flg = TTY_NORMAL;
for (i = uart->rx_dma_buf.head; i < uart->rx_dma_buf.tail; i++) {
if (uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i]))
goto dma_ignore_char;
- uart_insert_char(&uart->port, status, 2, uart->rx_dma_buf.buf[i], flg);
+ uart_insert_char(&uart->port, status, OE, uart->rx_dma_buf.buf[i], flg);
}
-dma_ignore_char:
+
+ dma_ignore_char:
tty_flip_buffer_push(tty);
}
*/
static void bfin_serial_break_ctl(struct uart_port *port, int break_state)
{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ u16 lcr = UART_GET_LCR(uart);
+ if (break_state)
+ lcr |= SB;
+ else
+ lcr &= ~SB;
+ UART_PUT_LCR(uart, lcr);
+ SSYNC();
}
static int bfin_serial_startup(struct uart_port *port)
add_timer(&(uart->rx_dma_timer));
#else
if (request_irq
- (uart->port.irq, bfin_serial_int, IRQF_DISABLED,
+ (uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
"BFIN_UART_RX", uart)) {
printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
return -EBUSY;
}
if (request_irq
- (uart->port.irq+1, bfin_serial_int, IRQF_DISABLED,
+ (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
"BFIN_UART_TX", uart)) {
printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n");
free_irq(uart->port.irq, uart);
if (termios->c_cflag & CSTOPB)
lcr |= STB;
- if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & PARENB)
lcr |= PEN;
- if (!(termios->c_cflag & PARODD))
- lcr |= EPS;
- }
+ if (!(termios->c_cflag & PARODD))
+ lcr |= EPS;
+ if (termios->c_cflag & CMSPAR)
+ lcr |= STP;
- /* These controls are not implemented for this port */
- termios->c_iflag |= INPCK | BRKINT | PARMRK;
- termios->c_iflag &= ~(IGNPAR | IGNBRK);
+ port->read_status_mask = OE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= (FE | PE);
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= BI;
- /* These controls are not implemented for this port */
- termios->c_iflag |= INPCK | BRKINT | PARMRK;
- termios->c_iflag &= ~(IGNPAR | IGNBRK);
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= FE | PE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= OE;
+ }
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
projects / linux-2.6-omap-h63xx.git / blobdiff