#define uart_console(port) (0)
#endif
-static void uart_change_speed(struct uart_state *state, struct ktermios *old_termios);
+static void uart_change_speed(struct uart_state *state,
+ struct ktermios *old_termios);
static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
static void uart_change_pm(struct uart_state *state, int pm_state);
spin_unlock_irqrestore(&port->lock, flags);
}
-#define uart_set_mctrl(port,set) uart_update_mctrl(port,set,0)
-#define uart_clear_mctrl(port,clear) uart_update_mctrl(port,0,clear)
+#define uart_set_mctrl(port, set) uart_update_mctrl(port, set, 0)
+#define uart_clear_mctrl(port, clear) uart_update_mctrl(port, 0, clear)
/*
* Startup the port. This will be called once per open. All calls
break;
default:
bits = 10;
- break; // CS8
+ break; /* CS8 */
}
if (cflag & CSTOPB)
* If it's still invalid, we try 9600 baud.
*
* Update the @termios structure to reflect the baud rate
- * we're actually going to be using.
+ * we're actually going to be using. Don't do this for the case
+ * where B0 is requested ("hang up").
*/
unsigned int
uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
struct ktermios *old, unsigned int min, unsigned int max)
{
unsigned int try, baud, altbaud = 38400;
+ int hung_up = 0;
upf_t flags = port->flags & UPF_SPD_MASK;
if (flags == UPF_SPD_HI)
/*
* Special case: B0 rate.
*/
- if (baud == 0)
+ if (baud == 0) {
+ hung_up = 1;
baud = 9600;
+ }
if (baud >= min && baud <= max)
return baud;
termios->c_cflag &= ~CBAUD;
if (old) {
baud = tty_termios_baud_rate(old);
- tty_termios_encode_baud_rate(termios, baud, baud);
+ if (!hung_up)
+ tty_termios_encode_baud_rate(termios,
+ baud, baud);
old = NULL;
continue;
}
* As a last resort, if the quotient is zero,
* default to 9600 bps
*/
- tty_termios_encode_baud_rate(termios, 9600, 9600);
+ if (!hung_up)
+ tty_termios_encode_baud_rate(termios, 9600, 9600);
}
return 0;
tmp.close_delay = state->close_delay / 10;
tmp.closing_wait = state->closing_wait == USF_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
- state->closing_wait / 10;
+ state->closing_wait / 10;
tmp.custom_divisor = port->custom_divisor;
tmp.hub6 = port->hub6;
tmp.io_type = port->iotype;
* We failed anyway.
*/
retval = -EBUSY;
- goto exit; // Added to return the correct error -Ram Gupta
+ /* Added to return the correct error -Ram Gupta */
+ goto exit;
}
}
((uart_circ_chars_pending(&state->info->xmit) > 0) &&
!state->info->tty->stopped && !state->info->tty->hw_stopped))
result &= ~TIOCSER_TEMT;
-
+
return put_user(result, value);
}
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
- ret = 0;
- break;
+ ret = 0;
+ break;
}
schedule();
return ret;
}
-static void uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+static void uart_set_termios(struct tty_struct *tty,
+ struct ktermios *old_termios)
{
struct uart_state *state = tty->driver_data;
unsigned long flags;
{
struct uart_state *state = tty->driver_data;
struct uart_port *port;
-
+
BUG_ON(!kernel_locked());
if (!state || !state->port)
uart_shutdown(state);
uart_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
+ tty_ldisc_flush(tty);
+
tty->closing = 0;
state->info->tty = NULL;
expire = jiffies + timeout;
pr_debug("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n",
- port->line, jiffies, expire);
+ port->line, jiffies, expire);
/*
* Check whether the transmitter is empty every 'char_time'.
* have set TTY_IO_ERROR for a non-existant port.
*/
if ((filp->f_flags & O_NONBLOCK) ||
- (info->tty->termios->c_cflag & CLOCAL) ||
- (info->tty->flags & (1 << TTY_IO_ERROR))) {
+ (info->tty->termios->c_cflag & CLOCAL) ||
+ (info->tty->flags & (1 << TTY_IO_ERROR)))
break;
- }
/*
* Set DTR to allow modem to know we're waiting. Do
}
/*
- * In 2.4.5, calls to uart_open are serialised by the BKL in
- * linux/fs/devices.c:chrdev_open()
+ * calls to uart_open are serialised by the BKL in
+ * fs/char_dev.c:chrdev_open()
* Note that if this fails, then uart_close() _will_ be called.
*
* In time, we want to scrap the "opening nonpresent ports"
port->line, uart_type(port),
mmio ? "mmio:0x" : "port:",
mmio ? (unsigned long long)port->mapbase
- : (unsigned long long) port->iobase,
+ : (unsigned long long) port->iobase,
port->irq);
if (port->type == PORT_UNKNOWN) {
return ret + 1;
}
- if(capable(CAP_SYS_ADMIN))
- {
+ if (capable(CAP_SYS_ADMIN)) {
mutex_lock(&state->mutex);
pm_state = state->pm_state;
if (pm_state)
if (port->icount.overrun)
ret += sprintf(buf + ret, " oe:%d",
port->icount.overrun);
-
-#define INFOBIT(bit,str) \
+
+#define INFOBIT(bit, str) \
if (port->mctrl & (bit)) \
strncat(stat_buf, (str), sizeof(stat_buf) - \
strlen(stat_buf) - 2)
-#define STATBIT(bit,str) \
+#define STATBIT(bit, str) \
if (status & (bit)) \
strncat(stat_buf, (str), sizeof(stat_buf) - \
strlen(stat_buf) - 2)
if (stat_buf[0])
stat_buf[0] = ' ';
strcat(stat_buf, "\n");
-
+
ret += sprintf(buf + ret, stat_buf);
} else {
strcat(buf, "\n");
}
#endif
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
+#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
/*
* uart_console_write - write a console message to a serial port
* @port: the port to write the message
* options. The format of the string is <baud><parity><bits><flow>,
* eg: 115200n8r
*/
-void __init
+void
uart_parse_options(char *options, int *baud, int *parity, int *bits, int *flow)
{
char *s = options;
if (*s)
*flow = *s;
}
+EXPORT_SYMBOL_GPL(uart_parse_options);
struct baud_rates {
unsigned int rate;
* @bits: number of data bits
* @flow: flow control character - 'r' (rts)
*/
-int __init
+int
uart_set_options(struct uart_port *port, struct console *co,
int baud, int parity, int bits, int flow)
{
port->mctrl |= TIOCM_DTR;
port->ops->set_termios(port, &termios, &dummy);
- co->cflag = termios.c_cflag;
+ /*
+ * Allow the setting of the UART parameters with a NULL console
+ * too:
+ */
+ if (co)
+ co->cflag = termios.c_cflag;
return 0;
}
+EXPORT_SYMBOL_GPL(uart_set_options);
#endif /* CONFIG_SERIAL_CORE_CONSOLE */
static void uart_change_pm(struct uart_state *state, int pm_state)
/*
* Wait for the transmitter to empty.
*/
- for (tries = 3; !ops->tx_empty(port) && tries; tries--) {
+ for (tries = 3; !ops->tx_empty(port) && tries; tries--)
msleep(10);
- }
if (!tries)
- printk(KERN_ERR "%s%s%s%d: Unable to drain transmitter\n",
+ printk(KERN_ERR "%s%s%s%d: Unable to drain "
+ "transmitter\n",
port->dev ? port->dev->bus_id : "",
port->dev ? ": " : "",
drv->dev_name, port->line);
}
}
+#ifdef CONFIG_CONSOLE_POLL
+
+static int uart_poll_init(struct tty_driver *driver, int line, char *options)
+{
+ struct uart_driver *drv = driver->driver_state;
+ struct uart_state *state = drv->state + line;
+ struct uart_port *port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (!state || !state->port)
+ return -1;
+
+ port = state->port;
+ if (!(port->ops->poll_get_char && port->ops->poll_put_char))
+ return -1;
+
+ if (options) {
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ return uart_set_options(port, NULL, baud, parity, bits, flow);
+ }
+
+ return 0;
+}
+
+static int uart_poll_get_char(struct tty_driver *driver, int line)
+{
+ struct uart_driver *drv = driver->driver_state;
+ struct uart_state *state = drv->state + line;
+ struct uart_port *port;
+
+ if (!state || !state->port)
+ return -1;
+
+ port = state->port;
+ return port->ops->poll_get_char(port);
+}
+
+static void uart_poll_put_char(struct tty_driver *driver, int line, char ch)
+{
+ struct uart_driver *drv = driver->driver_state;
+ struct uart_state *state = drv->state + line;
+ struct uart_port *port;
+
+ if (!state || !state->port)
+ return;
+
+ port = state->port;
+ port->ops->poll_put_char(port, ch);
+}
+#endif
+
static const struct tty_operations uart_ops = {
.open = uart_open,
.close = uart_close,
#endif
.tiocmget = uart_tiocmget,
.tiocmset = uart_tiocmset,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_init = uart_poll_init,
+ .poll_get_char = uart_poll_get_char,
+ .poll_put_char = uart_poll_put_char,
+#endif
};
/**
*/
tty_dev = tty_register_device(drv->tty_driver, port->line, port->dev);
if (likely(!IS_ERR(tty_dev))) {
- device_can_wakeup(tty_dev) = 1;
+ device_init_wakeup(tty_dev, 1);
device_set_wakeup_enable(tty_dev, 0);
} else
printk(KERN_ERR "Cannot register tty device on line %d\n",
projects / linux-2.6-omap-h63xx.git / blobdiff