int multi; /* 1 = multifunction, > 1 = # ports */
};
-static struct multi_id multi_id[] = {
+static const struct multi_id multi_id[] = {
{ MANFID_OMEGA, PRODID_OMEGA_QSP_100, 4 },
{ MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232, 2 },
{ MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232_D1, 2 },
static void serial_config(dev_link_t * link);
-static int serial_event(event_t event, int priority,
- event_callback_args_t * args);
-static dev_info_t dev_info = "serial_cs";
-
-static dev_link_t *serial_attach(void);
-static void serial_detach(dev_link_t *);
-
-static dev_link_t *dev_list = NULL;
/*======================================================================
}
}
-static void serial_suspend(dev_link_t *link)
+static int serial_suspend(struct pcmcia_device *dev)
{
+ dev_link_t *link = dev_to_instance(dev);
link->state |= DEV_SUSPEND;
if (link->state & DEV_CONFIG) {
if (!info->slave)
pcmcia_release_configuration(link->handle);
}
+
+ return 0;
}
-static void serial_resume(dev_link_t *link)
+static int serial_resume(struct pcmcia_device *dev)
{
+ dev_link_t *link = dev_to_instance(dev);
link->state &= ~DEV_SUSPEND;
if (DEV_OK(link)) {
for (i = 0; i < info->ndev; i++)
serial8250_resume_port(info->line[i]);
}
+
+ return 0;
}
/*======================================================================
======================================================================*/
-static dev_link_t *serial_attach(void)
+static int serial_probe(struct pcmcia_device *p_dev)
{
struct serial_info *info;
- client_reg_t client_reg;
dev_link_t *link;
- int ret;
DEBUG(0, "serial_attach()\n");
/* Create new serial device */
info = kmalloc(sizeof (*info), GFP_KERNEL);
if (!info)
- return NULL;
+ return -ENOMEM;
memset(info, 0, sizeof (*info));
link = &info->link;
link->priv = info;
}
link->conf.IntType = INT_MEMORY_AND_IO;
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- serial_detach(link);
- return NULL;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ serial_config(link);
- return link;
+ return 0;
}
/*======================================================================
======================================================================*/
-static void serial_detach(dev_link_t * link)
+static void serial_detach(struct pcmcia_device *p_dev)
{
+ dev_link_t *link = dev_to_instance(p_dev);
struct serial_info *info = link->priv;
- dev_link_t **linkp;
- int ret;
DEBUG(0, "serial_detach(0x%p)\n", link);
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link)
- break;
- if (*linkp == NULL)
- return;
-
/*
* Ensure any outstanding scheduled tasks are completed.
*/
*/
serial_remove(link);
- if (link->handle) {
- ret = pcmcia_deregister_client(link->handle);
- if (ret != CS_SUCCESS)
- cs_error(link->handle, DeregisterClient, ret);
- }
-
- /* Unlink device structure, free bits */
- *linkp = link->next;
+ /* free bits */
kfree(info);
}
static int simple_config(dev_link_t *link)
{
- static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
- static int size_table[2] = { 8, 16 };
+ static const kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ static const int size_table[2] = { 8, 16 };
client_handle_t handle = link->handle;
struct serial_info *info = link->priv;
struct serial_cfg_mem *cfg_mem;
kfree(cfg_mem);
}
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the serial drivers from
- talking to the ports.
-
-======================================================================*/
-
-static int
-serial_event(event_t event, int priority, event_callback_args_t * args)
-{
- dev_link_t *link = args->client_data;
- struct serial_info *info = link->priv;
-
- DEBUG(1, "serial_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- serial_remove(link);
- break;
-
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- serial_config(link);
- break;
-
- case CS_EVENT_PM_SUSPEND:
- serial_suspend(link);
- break;
-
- case CS_EVENT_RESET_PHYSICAL:
- if ((link->state & DEV_CONFIG) && !info->slave)
- pcmcia_release_configuration(link->handle);
- break;
-
- case CS_EVENT_PM_RESUME:
- serial_resume(link);
- break;
-
- case CS_EVENT_CARD_RESET:
- if (DEV_OK(link) && !info->slave)
- pcmcia_request_configuration(link->handle, &link->conf);
- break;
- }
- return 0;
-}
-
static struct pcmcia_device_id serial_ids[] = {
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"),
+ PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
+ PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
+ PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),
.drv = {
.name = "serial_cs",
},
- .attach = serial_attach,
- .event = serial_event,
- .detach = serial_detach,
+ .probe = serial_probe,
+ .remove = serial_detach,
.id_table = serial_ids,
+ .suspend = serial_suspend,
+ .resume = serial_resume,
};
static int __init init_serial_cs(void)
static void __exit exit_serial_cs(void)
{
pcmcia_unregister_driver(&serial_cs_driver);
- BUG_ON(dev_list != NULL);
}
module_init(init_serial_cs);
projects / linux-2.6-omap-h63xx.git / blobdiff