#include <linux/ioc4.h>
#include <linux/mmtimer.h>
#include <linux/rtc.h>
-#include <linux/rwsem.h>
+#include <linux/mutex.h>
#include <asm/sn/addrs.h>
#include <asm/sn/clksupport.h>
#include <asm/sn/shub_mmr.h>
* Submodule management *
************************/
-static LIST_HEAD(ioc4_devices);
-static DECLARE_RWSEM(ioc4_devices_rwsem);
+static DEFINE_MUTEX(ioc4_mutex);
+static LIST_HEAD(ioc4_devices);
static LIST_HEAD(ioc4_submodules);
-static DECLARE_RWSEM(ioc4_submodules_rwsem);
/* Register an IOC4 submodule */
int
{
struct ioc4_driver_data *idd;
- down_write(&ioc4_submodules_rwsem);
+ mutex_lock(&ioc4_mutex);
list_add(&is->is_list, &ioc4_submodules);
- up_write(&ioc4_submodules_rwsem);
/* Initialize submodule for each IOC4 */
if (!is->is_probe)
- return 0;
+ goto out;
- down_read(&ioc4_devices_rwsem);
list_for_each_entry(idd, &ioc4_devices, idd_list) {
if (is->is_probe(idd)) {
printk(KERN_WARNING
pci_name(idd->idd_pdev));
}
}
- up_read(&ioc4_devices_rwsem);
-
+ out:
+ mutex_unlock(&ioc4_mutex);
return 0;
}
{
struct ioc4_driver_data *idd;
- down_write(&ioc4_submodules_rwsem);
+ mutex_lock(&ioc4_mutex);
list_del(&is->is_list);
- up_write(&ioc4_submodules_rwsem);
/* Remove submodule for each IOC4 */
if (!is->is_remove)
- return;
+ goto out;
- down_read(&ioc4_devices_rwsem);
list_for_each_entry(idd, &ioc4_devices, idd_list) {
if (is->is_remove(idd)) {
printk(KERN_WARNING
pci_name(idd->idd_pdev));
}
}
- up_read(&ioc4_devices_rwsem);
+ out:
+ mutex_unlock(&ioc4_mutex);
}
/*********************
writel(0, &idd->idd_misc_regs->int_out.raw);
mmiowb();
- printk(KERN_INFO
- "%s: Calibrating PCI bus speed "
- "for pci_dev %s ... ", __FUNCTION__, pci_name(idd->idd_pdev));
/* Set up square wave */
int_out.raw = 0;
int_out.fields.count = IOC4_CALIBRATE_COUNT;
/* Bounds check the result. */
if (period > IOC4_CALIBRATE_LOW_LIMIT ||
period < IOC4_CALIBRATE_HIGH_LIMIT) {
- printk("failed. Assuming PCI clock ticks are %d ns.\n",
+ printk(KERN_INFO
+ "IOC4 %s: Clock calibration failed. Assuming"
+ "PCI clock is %d ns.\n",
+ pci_name(idd->idd_pdev),
IOC4_CALIBRATE_DEFAULT / IOC4_EXTINT_COUNT_DIVISOR);
period = IOC4_CALIBRATE_DEFAULT;
} else {
- printk("succeeded. PCI clock ticks are %ld ns.\n",
+ printk(KERN_DEBUG
+ "IOC4 %s: PCI clock is %ld ns.\n",
+ pci_name(idd->idd_pdev),
period / IOC4_EXTINT_COUNT_DIVISOR);
}
idd->count_period = period;
}
+/* There are three variants of IOC4 cards: IO9, IO10, and PCI-RT.
+ * Each brings out different combinations of IOC4 signals, thus.
+ * the IOC4 subdrivers need to know to which we're attached.
+ *
+ * We look for the presence of a SCSI (IO9) or SATA (IO10) controller
+ * on the same PCI bus at slot number 3 to differentiate IO9 from IO10.
+ * If neither is present, it's a PCI-RT.
+ */
+static unsigned int
+ioc4_variant(struct ioc4_driver_data *idd)
+{
+ struct pci_dev *pdev = NULL;
+ int found = 0;
+
+ /* IO9: Look for a QLogic ISP 12160 at the same bus and slot 3. */
+ do {
+ pdev = pci_get_device(PCI_VENDOR_ID_QLOGIC,
+ PCI_DEVICE_ID_QLOGIC_ISP12160, pdev);
+ if (pdev &&
+ idd->idd_pdev->bus->number == pdev->bus->number &&
+ 3 == PCI_SLOT(pdev->devfn))
+ found = 1;
+ pci_dev_put(pdev);
+ } while (pdev && !found);
+ if (NULL != pdev)
+ return IOC4_VARIANT_IO9;
+
+ /* IO10: Look for a Vitesse VSC 7174 at the same bus and slot 3. */
+ pdev = NULL;
+ do {
+ pdev = pci_get_device(PCI_VENDOR_ID_VITESSE,
+ PCI_DEVICE_ID_VITESSE_VSC7174, pdev);
+ if (pdev &&
+ idd->idd_pdev->bus->number == pdev->bus->number &&
+ 3 == PCI_SLOT(pdev->devfn))
+ found = 1;
+ pci_dev_put(pdev);
+ } while (pdev && !found);
+ if (NULL != pdev)
+ return IOC4_VARIANT_IO10;
+
+ /* PCI-RT: No SCSI/SATA controller will be present */
+ return IOC4_VARIANT_PCI_RT;
+}
+
/* Adds a new instance of an IOC4 card */
static int
ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
/* Failsafe portion of per-IOC4 initialization */
+ /* Detect card variant */
+ idd->idd_variant = ioc4_variant(idd);
+ printk(KERN_INFO "IOC4 %s: %s card detected.\n", pci_name(pdev),
+ idd->idd_variant == IOC4_VARIANT_IO9 ? "IO9" :
+ idd->idd_variant == IOC4_VARIANT_PCI_RT ? "PCI-RT" :
+ idd->idd_variant == IOC4_VARIANT_IO10 ? "IO10" : "unknown");
+
/* Initialize IOC4 */
pci_read_config_dword(idd->idd_pdev, PCI_COMMAND, &pcmd);
pci_write_config_dword(idd->idd_pdev, PCI_COMMAND,
/* Track PCI-device specific data */
idd->idd_serial_data = NULL;
pci_set_drvdata(idd->idd_pdev, idd);
- down_write(&ioc4_devices_rwsem);
- list_add(&idd->idd_list, &ioc4_devices);
- up_write(&ioc4_devices_rwsem);
+
+ mutex_lock(&ioc4_mutex);
+ list_add_tail(&idd->idd_list, &ioc4_devices);
/* Add this IOC4 to all submodules */
- down_read(&ioc4_submodules_rwsem);
list_for_each_entry(is, &ioc4_submodules, is_list) {
if (is->is_probe && is->is_probe(idd)) {
printk(KERN_WARNING
pci_name(idd->idd_pdev));
}
}
- up_read(&ioc4_submodules_rwsem);
+ mutex_unlock(&ioc4_mutex);
return 0;
idd = pci_get_drvdata(pdev);
/* Remove this IOC4 from all submodules */
- down_read(&ioc4_submodules_rwsem);
+ mutex_lock(&ioc4_mutex);
list_for_each_entry(is, &ioc4_submodules, is_list) {
if (is->is_remove && is->is_remove(idd)) {
printk(KERN_WARNING
pci_name(idd->idd_pdev));
}
}
- up_read(&ioc4_submodules_rwsem);
+ mutex_unlock(&ioc4_mutex);
/* Release resources */
iounmap(idd->idd_misc_regs);
pci_disable_device(pdev);
/* Remove and free driver data */
- down_write(&ioc4_devices_rwsem);
+ mutex_lock(&ioc4_mutex);
list_del(&idd->idd_list);
- up_write(&ioc4_devices_rwsem);
+ mutex_unlock(&ioc4_mutex);
kfree(idd);
}
projects / linux-2.6-omap-h63xx.git / blobdiff