intf = to_usb_interface(dev);
udev = interface_to_usbdev(intf);
+ if (udev->authorized == 0) {
+ dev_err(&intf->dev, "Device is not authorized for usage\n");
+ return -ENODEV;
+ }
+
id = usb_match_id(intf, driver->id_table);
if (!id)
id = usb_match_dynamic_id(intf, driver);
}
#ifdef CONFIG_HOTPLUG
-static int usb_uevent(struct device *dev, char **envp, int num_envp,
- char *buffer, int buffer_size)
+static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct usb_device *usb_dev;
- int i = 0;
- int length = 0;
if (!dev)
return -ENODEV;
* all the device descriptors we don't tell them about. Or
* act as usermode drivers.
*/
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "DEVICE=/proc/bus/usb/%03d/%03d",
+ if (add_uevent_var(env, "DEVICE=/proc/bus/usb/%03d/%03d",
usb_dev->bus->busnum, usb_dev->devnum))
return -ENOMEM;
#endif
/* per-device configurations are common */
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "PRODUCT=%x/%x/%x",
+ if (add_uevent_var(env, "PRODUCT=%x/%x/%x",
le16_to_cpu(usb_dev->descriptor.idVendor),
le16_to_cpu(usb_dev->descriptor.idProduct),
le16_to_cpu(usb_dev->descriptor.bcdDevice)))
return -ENOMEM;
/* class-based driver binding models */
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "TYPE=%d/%d/%d",
+ if (add_uevent_var(env, "TYPE=%d/%d/%d",
usb_dev->descriptor.bDeviceClass,
usb_dev->descriptor.bDeviceSubClass,
usb_dev->descriptor.bDeviceProtocol))
return -ENOMEM;
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "BUSNUM=%03d",
+ if (add_uevent_var(env, "BUSNUM=%03d",
usb_dev->bus->busnum))
return -ENOMEM;
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "DEVNUM=%03d",
+ if (add_uevent_var(env, "DEVNUM=%03d",
usb_dev->devnum))
return -ENOMEM;
- envp[i] = NULL;
return 0;
}
#else
-static int usb_uevent(struct device *dev, char **envp,
- int num_envp, char *buffer, int buffer_size)
+static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
{
return -ENODEV;
}
#ifdef CONFIG_USB_SUSPEND
/* Internal routine to check whether we may autosuspend a device. */
-static int autosuspend_check(struct usb_device *udev)
+static int autosuspend_check(struct usb_device *udev, int reschedule)
{
int i;
struct usb_interface *intf;
- unsigned long suspend_time;
+ unsigned long suspend_time, j;
/* For autosuspend, fail fast if anything is in use or autosuspend
* is disabled. Also fail if any interfaces require remote wakeup
}
/* If everything is okay but the device hasn't been idle for long
- * enough, queue a delayed autosuspend request.
+ * enough, queue a delayed autosuspend request. If the device
+ * _has_ been idle for long enough and the reschedule flag is set,
+ * likewise queue a delayed (1 second) autosuspend request.
*/
- if (time_after(suspend_time, jiffies)) {
+ j = jiffies;
+ if (time_before(j, suspend_time))
+ reschedule = 1;
+ else
+ suspend_time = j + HZ;
+ if (reschedule) {
if (!timer_pending(&udev->autosuspend.timer)) {
-
- /* The value of jiffies may change between the
- * time_after() comparison above and the subtraction
- * below. That's okay; the system behaves sanely
- * when a timer is registered for the present moment
- * or for the past.
- */
queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
- round_jiffies_relative(suspend_time - jiffies));
- }
+ round_jiffies_relative(suspend_time - j));
+ }
return -EAGAIN;
}
return 0;
#else
-static inline int autosuspend_check(struct usb_device *udev)
+static inline int autosuspend_check(struct usb_device *udev, int reschedule)
{
return 0;
}
udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
if (udev->auto_pm) {
- status = autosuspend_check(udev);
+ status = autosuspend_check(udev, 0);
if (status < 0)
goto done;
}
break;
}
}
- if (status == 0) {
-
- /* Non-root devices don't need to do anything for FREEZE
- * or PRETHAW. */
- if (udev->parent && (msg.event == PM_EVENT_FREEZE ||
- msg.event == PM_EVENT_PRETHAW))
- goto done;
+ if (status == 0)
status = usb_suspend_device(udev, msg);
- }
/* If the suspend failed, resume interfaces that did get suspended */
if (status != 0) {
/* Try another autosuspend when the interfaces aren't busy */
if (udev->auto_pm)
- autosuspend_check(udev);
+ autosuspend_check(udev, status == -EBUSY);
- /* If the suspend succeeded, propagate it up the tree */
+ /* If the suspend succeeded then prevent any more URB submissions,
+ * flush any outstanding URBs, and propagate the suspend up the tree.
+ */
} else {
cancel_delayed_work(&udev->autosuspend);
- if (parent)
+ udev->can_submit = 0;
+ for (i = 0; i < 16; ++i) {
+ usb_hcd_flush_endpoint(udev, udev->ep_out[i]);
+ usb_hcd_flush_endpoint(udev, udev->ep_in[i]);
+ }
+
+ /* If this is just a FREEZE or a PRETHAW, udev might
+ * not really be suspended. Only true suspends get
+ * propagated up the device tree.
+ */
+ if (parent && udev->state == USB_STATE_SUSPENDED)
usb_autosuspend_device(parent);
}
status = -ENODEV;
goto done;
}
+ udev->can_submit = 1;
/* Propagate the resume up the tree, if necessary */
if (udev->state == USB_STATE_SUSPENDED) {
static int usb_suspend(struct device *dev, pm_message_t message)
{
+ struct usb_device *udev;
+
if (!is_usb_device(dev)) /* Ignore PM for interfaces */
return 0;
- return usb_external_suspend_device(to_usb_device(dev), message);
+ udev = to_usb_device(dev);
+
+ /* If udev is already suspended, we can skip this suspend and
+ * we should also skip the upcoming system resume. */
+ if (udev->state == USB_STATE_SUSPENDED) {
+ udev->skip_sys_resume = 1;
+ return 0;
+ }
+
+ udev->skip_sys_resume = 0;
+ return usb_external_suspend_device(udev, message);
}
static int usb_resume(struct device *dev)
return 0;
udev = to_usb_device(dev);
- /* If autoresume is disabled then we also want to prevent resume
- * during system wakeup. However, a "persistent-device" reset-resume
- * after power loss counts as a wakeup event. So allow a
- * reset-resume to occur if remote wakeup is enabled. */
- if (udev->autoresume_disabled) {
+ /* If udev->skip_sys_resume is set then udev was already suspended
+ * when the system suspend started, so we don't want to resume
+ * udev during this system wakeup. However a reset-resume counts
+ * as a wakeup event, so allow a reset-resume to occur if remote
+ * wakeup is enabled. */
+ if (udev->skip_sys_resume) {
if (!(udev->reset_resume && udev->do_remote_wakeup))
- return -EPERM;
+ return -EHOSTUNREACH;
}
return usb_external_resume_device(udev);
}
projects / linux-2.6-omap-h63xx.git / blobdiff