/* used for controlling access to virtual root hubs */
static DEFINE_SPINLOCK(hcd_root_hub_lock);
-/* used when updating hcd data */
-static DEFINE_SPINLOCK(hcd_data_lock);
+/* used when updating an endpoint's URB list */
+static DEFINE_SPINLOCK(hcd_urb_list_lock);
/* wait queue for synchronous unlinks */
DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
+static inline int is_root_hub(struct usb_device *udev)
+{
+ return (udev->parent == NULL);
+}
+
/*-------------------------------------------------------------------------*/
/*
}
/* The USB 2.0 spec says 256 ms. This is close enough and won't
- * exceed that limit if HZ is 100. */
+ * exceed that limit if HZ is 100. The math is more clunky than
+ * maybe expected, this is to make sure that all timers for USB devices
+ * fire at the same time to give the CPU a break inbetween */
if (hcd->uses_new_polling ? hcd->poll_rh :
(length == 0 && hcd->status_urb != NULL))
- mod_timer (&hcd->rh_timer, jiffies + msecs_to_jiffies(250));
+ mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
}
EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
urb->hcpriv = hcd; /* indicate it's queued */
if (!hcd->uses_new_polling)
- mod_timer (&hcd->rh_timer, jiffies +
- msecs_to_jiffies(250));
+ mod_timer (&hcd->rh_timer,
+ (jiffies/(HZ/4) + 1) * (HZ/4));
/* If a status change has already occurred, report it ASAP */
else if (hcd->poll_pending)
/*-------------------------------------------------------------------------*/
-static void urb_unlink (struct urb *urb)
+static void urb_unlink(struct usb_hcd *hcd, struct urb *urb)
{
unsigned long flags;
/* clear all state linking urb to this dev (and hcd) */
-
- spin_lock_irqsave (&hcd_data_lock, flags);
+ spin_lock_irqsave(&hcd_urb_list_lock, flags);
list_del_init (&urb->urb_list);
- spin_unlock_irqrestore (&hcd_data_lock, flags);
-}
+ spin_unlock_irqrestore(&hcd_urb_list_lock, flags);
+ if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
+ if (usb_pipecontrol (urb->pipe)
+ && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
+ dma_unmap_single (hcd->self.controller, urb->setup_dma,
+ sizeof (struct usb_ctrlrequest),
+ DMA_TO_DEVICE);
+ if (urb->transfer_buffer_length != 0
+ && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
+ dma_unmap_single (hcd->self.controller,
+ urb->transfer_dma,
+ urb->transfer_buffer_length,
+ usb_pipein (urb->pipe)
+ ? DMA_FROM_DEVICE
+ : DMA_TO_DEVICE);
+ }
+}
/* may be called in any context with a valid urb->dev usecount
* caller surrenders "ownership" of urb
// FIXME: verify that quiescing hc works right (RH cleans up)
- spin_lock_irqsave (&hcd_data_lock, flags);
+ spin_lock_irqsave(&hcd_urb_list_lock, flags);
ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out)
[usb_pipeendpoint(urb->pipe)];
if (unlikely (!ep))
else switch (hcd->state) {
case HC_STATE_RUNNING:
case HC_STATE_RESUMING:
-doit:
list_add_tail (&urb->urb_list, &ep->urb_list);
status = 0;
break;
- case HC_STATE_SUSPENDED:
- /* HC upstream links (register access, wakeup signaling) can work
- * even when the downstream links (and DMA etc) are quiesced; let
- * usbcore talk to the root hub.
- */
- if (hcd->self.controller->power.power_state.event == PM_EVENT_ON
- && urb->dev->parent == NULL)
- goto doit;
- /* FALL THROUGH */
default:
status = -ESHUTDOWN;
break;
}
- spin_unlock_irqrestore (&hcd_data_lock, flags);
+ spin_unlock_irqrestore(&hcd_urb_list_lock, flags);
if (status) {
INIT_LIST_HEAD (&urb->urb_list);
usbmon_urb_submit_error(&hcd->self, urb, status);
urb = usb_get_urb (urb);
atomic_inc (&urb->use_count);
- if (urb->dev == hcd->self.root_hub) {
+ if (is_root_hub(urb->dev)) {
/* NOTE: requirement on hub callers (usbfs and the hub
* driver, for now) that URBs' urb->transfer_buffer be
* valid and usb_buffer_{sync,unmap}() not be needed, since
status = hcd->driver->urb_enqueue (hcd, ep, urb, mem_flags);
done:
if (unlikely (status)) {
- urb_unlink (urb);
+ urb_unlink(hcd, urb);
atomic_dec (&urb->use_count);
if (urb->reject)
wake_up (&usb_kill_urb_queue);
- usb_put_urb (urb);
usbmon_urb_submit_error(&hcd->self, urb, status);
+ usb_put_urb (urb);
}
return status;
}
/*-------------------------------------------------------------------------*/
-/* called in any context */
-int usb_hcd_get_frame_number (struct usb_device *udev)
-{
- struct usb_hcd *hcd = bus_to_hcd(udev->bus);
-
- if (!HC_IS_RUNNING (hcd->state))
- return -ESHUTDOWN;
- return hcd->driver->get_frame_number (hcd);
-}
-
-/*-------------------------------------------------------------------------*/
-
/* this makes the hcd giveback() the urb more quickly, by kicking it
* off hardware queues (which may take a while) and returning it as
* soon as practical. we've already set up the urb's return status,
{
int value;
- if (urb->dev == hcd->self.root_hub)
+ if (is_root_hub(urb->dev))
value = usb_rh_urb_dequeue (hcd, urb);
else {
* that it was submitted. But as a rule it can't know whether or
* not it's already been unlinked ... so we respect the reversed
* lock sequence needed for the usb_hcd_giveback_urb() code paths
- * (urb lock, then hcd_data_lock) in case some other CPU is now
+ * (urb lock, then hcd_urb_list_lock) in case some other CPU is now
* unlinking it.
*/
spin_lock_irqsave (&urb->lock, flags);
- spin_lock (&hcd_data_lock);
+ spin_lock(&hcd_urb_list_lock);
sys = &urb->dev->dev;
hcd = bus_to_hcd(urb->dev->bus);
* finish unlinking the initial failed usb_set_address()
* or device descriptor fetch.
*/
- if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags)
- && hcd->self.root_hub != urb->dev) {
+ if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) &&
+ !is_root_hub(urb->dev)) {
dev_warn (hcd->self.controller, "Unlink after no-IRQ? "
- "Controller is probably using the wrong IRQ."
- "\n");
+ "Controller is probably using the wrong IRQ.\n");
set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
}
urb->status = status;
- spin_unlock (&hcd_data_lock);
+ spin_unlock(&hcd_urb_list_lock);
spin_unlock_irqrestore (&urb->lock, flags);
retval = unlink1 (hcd, urb);
return retval;
done:
- spin_unlock (&hcd_data_lock);
+ spin_unlock(&hcd_urb_list_lock);
spin_unlock_irqrestore (&urb->lock, flags);
if (retval != -EIDRM && sys && sys->driver)
dev_dbg (sys, "hcd_unlink_urb %p fail %d\n", urb, retval);
/*-------------------------------------------------------------------------*/
+/**
+ * usb_hcd_giveback_urb - return URB from HCD to device driver
+ * @hcd: host controller returning the URB
+ * @urb: urb being returned to the USB device driver.
+ * Context: in_interrupt()
+ *
+ * This hands the URB from HCD to its USB device driver, using its
+ * completion function. The HCD has freed all per-urb resources
+ * (and is done using urb->hcpriv). It also released all HCD locks;
+ * the device driver won't cause problems if it frees, modifies,
+ * or resubmits this URB.
+ */
+void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb)
+{
+ urb_unlink(hcd, urb);
+ usbmon_urb_complete (&hcd->self, urb);
+ usb_unanchor_urb(urb);
+
+ /* pass ownership to the completion handler */
+ urb->complete (urb);
+ atomic_dec (&urb->use_count);
+ if (unlikely (urb->reject))
+ wake_up (&usb_kill_urb_queue);
+ usb_put_urb (urb);
+}
+EXPORT_SYMBOL (usb_hcd_giveback_urb);
+
+/*-------------------------------------------------------------------------*/
+
/* disables the endpoint: cancels any pending urbs, then synchronizes with
* the hcd to make sure all endpoint state is gone from hardware, and then
* waits until the endpoint's queue is completely drained. use for
struct urb *urb;
hcd = bus_to_hcd(udev->bus);
-
- WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT &&
- udev->state != USB_STATE_NOTATTACHED);
-
local_irq_disable ();
/* ep is already gone from udev->ep_{in,out}[]; no more submits */
rescan:
- spin_lock (&hcd_data_lock);
+ spin_lock(&hcd_urb_list_lock);
list_for_each_entry (urb, &ep->urb_list, urb_list) {
int tmp;
if (urb->status != -EINPROGRESS)
continue;
usb_get_urb (urb);
- spin_unlock (&hcd_data_lock);
+ spin_unlock(&hcd_urb_list_lock);
spin_lock (&urb->lock);
tmp = urb->status;
/* list contents may have changed */
goto rescan;
}
- spin_unlock (&hcd_data_lock);
+ spin_unlock(&hcd_urb_list_lock);
local_irq_enable ();
/* synchronize with the hardware, so old configuration state
* endpoint_disable methods.
*/
while (!list_empty (&ep->urb_list)) {
- spin_lock_irq (&hcd_data_lock);
+ spin_lock_irq(&hcd_urb_list_lock);
/* The list may have changed while we acquired the spinlock */
urb = NULL;
urb_list);
usb_get_urb (urb);
}
- spin_unlock_irq (&hcd_data_lock);
+ spin_unlock_irq(&hcd_urb_list_lock);
if (urb) {
usb_kill_urb (urb);
/*-------------------------------------------------------------------------*/
+/* called in any context */
+int usb_hcd_get_frame_number (struct usb_device *udev)
+{
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+ if (!HC_IS_RUNNING (hcd->state))
+ return -ESHUTDOWN;
+ return hcd->driver->get_frame_number (hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
#ifdef CONFIG_PM
-int hcd_bus_suspend (struct usb_bus *bus)
+int hcd_bus_suspend(struct usb_device *rhdev)
{
- struct usb_hcd *hcd;
- int status;
+ struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self);
+ int status;
+ int old_state = hcd->state;
- hcd = container_of (bus, struct usb_hcd, self);
- if (!hcd->driver->bus_suspend)
- return -ENOENT;
- hcd->state = HC_STATE_QUIESCING;
- status = hcd->driver->bus_suspend (hcd);
- if (status == 0)
+ dev_dbg(&rhdev->dev, "bus %s%s\n",
+ rhdev->auto_pm ? "auto-" : "", "suspend");
+ if (!hcd->driver->bus_suspend) {
+ status = -ENOENT;
+ } else {
+ hcd->state = HC_STATE_QUIESCING;
+ status = hcd->driver->bus_suspend(hcd);
+ }
+ if (status == 0) {
+ usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
hcd->state = HC_STATE_SUSPENDED;
- else
- dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n",
+ } else {
+ hcd->state = old_state;
+ dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
"suspend", status);
+ }
return status;
}
-int hcd_bus_resume (struct usb_bus *bus)
+int hcd_bus_resume(struct usb_device *rhdev)
{
- struct usb_hcd *hcd;
- int status;
+ struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self);
+ int status;
+ int old_state = hcd->state;
- hcd = container_of (bus, struct usb_hcd, self);
+ dev_dbg(&rhdev->dev, "usb %s%s\n",
+ rhdev->auto_pm ? "auto-" : "", "resume");
if (!hcd->driver->bus_resume)
return -ENOENT;
if (hcd->state == HC_STATE_RUNNING)
return 0;
+
hcd->state = HC_STATE_RESUMING;
- status = hcd->driver->bus_resume (hcd);
- if (status == 0)
+ status = hcd->driver->bus_resume(hcd);
+ if (status == 0) {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+ usb_set_device_state(rhdev, rhdev->actconfig
+ ? USB_STATE_CONFIGURED
+ : USB_STATE_ADDRESS);
hcd->state = HC_STATE_RUNNING;
- else {
- dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n",
+ } else {
+ hcd->state = old_state;
+ dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
"resume", status);
- usb_hc_died(hcd);
+ if (status != -ESHUTDOWN)
+ usb_hc_died(hcd);
}
return status;
}
/*-------------------------------------------------------------------------*/
-/**
- * usb_hcd_giveback_urb - return URB from HCD to device driver
- * @hcd: host controller returning the URB
- * @urb: urb being returned to the USB device driver.
- * Context: in_interrupt()
- *
- * This hands the URB from HCD to its USB device driver, using its
- * completion function. The HCD has freed all per-urb resources
- * (and is done using urb->hcpriv). It also released all HCD locks;
- * the device driver won't cause problems if it frees, modifies,
- * or resubmits this URB.
- */
-void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb)
-{
- int at_root_hub;
-
- at_root_hub = (urb->dev == hcd->self.root_hub);
- urb_unlink (urb);
-
- /* lower level hcd code should use *_dma exclusively if the
- * host controller does DMA */
- if (hcd->self.uses_dma && !at_root_hub) {
- if (usb_pipecontrol (urb->pipe)
- && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
- dma_unmap_single (hcd->self.controller, urb->setup_dma,
- sizeof (struct usb_ctrlrequest),
- DMA_TO_DEVICE);
- if (urb->transfer_buffer_length != 0
- && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
- dma_unmap_single (hcd->self.controller,
- urb->transfer_dma,
- urb->transfer_buffer_length,
- usb_pipein (urb->pipe)
- ? DMA_FROM_DEVICE
- : DMA_TO_DEVICE);
- }
-
- usbmon_urb_complete (&hcd->self, urb);
- /* pass ownership to the completion handler */
- urb->complete (urb);
- atomic_dec (&urb->use_count);
- if (unlikely (urb->reject))
- wake_up (&usb_kill_urb_queue);
- usb_put_urb (urb);
-}
-EXPORT_SYMBOL (usb_hcd_giveback_urb);
-
-/*-------------------------------------------------------------------------*/
-
/**
* usb_hcd_irq - hook IRQs to HCD framework (bus glue)
* @irq: the IRQ being raised
spin_unlock_irq (&hcd_root_hub_lock);
#ifdef CONFIG_PM
- flush_workqueue(ksuspend_usb_wq);
+ cancel_work_sync(&hcd->wakeup_work);
#endif
mutex_lock(&usb_bus_list_lock);
projects / linux-2.6-omap-h63xx.git / blobdiff