#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/usb.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
#include <asm/byteorder.h>
#include <asm/io.h>
static int dummy_urb_enqueue (
struct usb_hcd *hcd,
- struct usb_host_endpoint *ep,
struct urb *urb,
gfp_t mem_flags
) {
struct dummy *dum;
struct urbp *urbp;
unsigned long flags;
+ int rc;
if (!urb->transfer_buffer && urb->transfer_buffer_length)
return -EINVAL;
dum = hcd_to_dummy (hcd);
spin_lock_irqsave (&dum->lock, flags);
+ rc = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (rc) {
+ kfree(urbp);
+ goto done;
+ }
if (!dum->udev) {
dum->udev = urb->dev;
if (!timer_pending (&dum->timer))
mod_timer (&dum->timer, jiffies + 1);
- spin_unlock_irqrestore (&dum->lock, flags);
- return 0;
+ done:
+ spin_unlock_irqrestore(&dum->lock, flags);
+ return rc;
}
-static int dummy_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
+static int dummy_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
struct dummy *dum;
unsigned long flags;
+ int rc;
/* giveback happens automatically in timer callback,
* so make sure the callback happens */
dum = hcd_to_dummy (hcd);
spin_lock_irqsave (&dum->lock, flags);
- if (dum->rh_state != DUMMY_RH_RUNNING && !list_empty(&dum->urbp_list))
+
+ rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (!rc && dum->rh_state != DUMMY_RH_RUNNING &&
+ !list_empty(&dum->urbp_list))
mod_timer (&dum->timer, jiffies);
- spin_unlock_irqrestore (&dum->lock, flags);
- return 0;
-}
-static void maybe_set_status (struct urb *urb, int status)
-{
- spin_lock (&urb->lock);
- if (urb->status == -EINPROGRESS)
- urb->status = status;
- spin_unlock (&urb->lock);
+ spin_unlock_irqrestore (&dum->lock, flags);
+ return rc;
}
/* transfer up to a frame's worth; caller must own lock */
static int
-transfer (struct dummy *dum, struct urb *urb, struct dummy_ep *ep, int limit)
+transfer(struct dummy *dum, struct urb *urb, struct dummy_ep *ep, int limit,
+ int *status)
{
struct dummy_request *req;
*
* partially filling a buffer optionally blocks queue advances
* (so completion handlers can clean up the queue) but we don't
- * need to emulate such data-in-flight. so we only show part
- * of the URB_SHORT_NOT_OK effect: completion status.
+ * need to emulate such data-in-flight.
*/
if (is_short) {
if (host_len == dev_len) {
req->req.status = 0;
- maybe_set_status (urb, 0);
+ *status = 0;
} else if (to_host) {
req->req.status = 0;
if (dev_len > host_len)
- maybe_set_status (urb, -EOVERFLOW);
+ *status = -EOVERFLOW;
else
- maybe_set_status (urb,
- (urb->transfer_flags
- & URB_SHORT_NOT_OK)
- ? -EREMOTEIO : 0);
+ *status = 0;
} else if (!to_host) {
- maybe_set_status (urb, 0);
+ *status = 0;
if (host_len > dev_len)
req->req.status = -EOVERFLOW;
else
req->req.status = 0;
if (urb->transfer_buffer_length == urb->actual_length
&& !(urb->transfer_flags
- & URB_ZERO_PACKET)) {
- maybe_set_status (urb, 0);
- }
+ & URB_ZERO_PACKET))
+ *status = 0;
}
/* device side completion --> continuable */
}
/* host side completion --> terminate */
- if (urb->status != -EINPROGRESS)
+ if (*status != -EINPROGRESS)
break;
/* rescan to continue with any other queued i/o */
u8 address;
struct dummy_ep *ep = NULL;
int type;
+ int status = -EINPROGRESS;
urb = urbp->urb;
- if (urb->status != -EINPROGRESS) {
- /* likely it was just unlinked */
+ if (urb->unlinked)
goto return_urb;
- } else if (dum->rh_state != DUMMY_RH_RUNNING)
+ else if (dum->rh_state != DUMMY_RH_RUNNING)
continue;
type = usb_pipetype (urb->pipe);
dev_dbg (dummy_dev(dum),
"no ep configured for urb %p\n",
urb);
- maybe_set_status (urb, -EPROTO);
+ status = -EPROTO;
goto return_urb;
}
/* NOTE: must not be iso! */
dev_dbg (dummy_dev(dum), "ep %s halted, urb %p\n",
ep->ep.name, urb);
- maybe_set_status (urb, -EPIPE);
+ status = -EPIPE;
goto return_urb;
}
/* FIXME make sure both ends agree on maxpacket */
w_value = le16_to_cpu(setup.wValue);
if (le16_to_cpu(setup.wLength) !=
urb->transfer_buffer_length) {
- maybe_set_status (urb, -EOVERFLOW);
+ status = -EOVERFLOW;
goto return_urb;
}
if (setup.bRequestType != Dev_Request)
break;
dum->address = w_value;
- maybe_set_status (urb, 0);
+ status = 0;
dev_dbg (udc_dev(dum), "set_address = %d\n",
w_value);
value = 0;
if (value == 0) {
dum->devstatus |=
(1 << w_value);
- maybe_set_status (urb, 0);
+ status = 0;
}
} else if (setup.bRequestType == Ep_Request) {
}
ep2->halted = 1;
value = 0;
- maybe_set_status (urb, 0);
+ status = 0;
}
break;
case USB_REQ_CLEAR_FEATURE:
dum->devstatus &= ~(1 <<
USB_DEVICE_REMOTE_WAKEUP);
value = 0;
- maybe_set_status (urb, 0);
+ status = 0;
break;
default:
value = -EOPNOTSUPP;
}
ep2->halted = 0;
value = 0;
- maybe_set_status (urb, 0);
+ status = 0;
}
break;
case USB_REQ_GET_STATUS:
urb->actual_length = min (2,
urb->transfer_buffer_length);
value = 0;
- maybe_set_status (urb, 0);
+ status = 0;
}
break;
}
dev_dbg (udc_dev(dum),
"setup --> %d\n",
value);
- maybe_set_status (urb, -EPIPE);
+ status = -EPIPE;
urb->actual_length = 0;
}
* report random errors, to debug drivers.
*/
limit = max (limit, periodic_bytes (dum, ep));
- maybe_set_status (urb, -ENOSYS);
+ status = -ENOSYS;
break;
case PIPE_INTERRUPT:
default:
treat_control_like_bulk:
ep->last_io = jiffies;
- total = transfer (dum, urb, ep, limit);
+ total = transfer(dum, urb, ep, limit, &status);
break;
}
/* incomplete transfer? */
- if (urb->status == -EINPROGRESS)
+ if (status == -EINPROGRESS)
continue;
return_urb:
- urb->hcpriv = NULL;
list_del (&urbp->urbp_list);
kfree (urbp);
if (ep)
ep->already_seen = ep->setup_stage = 0;
+ usb_hcd_unlink_urb_from_ep(dummy_to_hcd(dum), urb);
spin_unlock (&dum->lock);
- usb_hcd_giveback_urb (dummy_to_hcd(dum), urb);
+ usb_hcd_giveback_urb(dummy_to_hcd(dum), urb, status);
spin_lock (&dum->lock);
goto restart;
projects / linux-2.6-omap-h63xx.git / blobdiff