* removable Default false, boolean for removable media
* luns=N Default N = number of filenames, number of
* LUNs to support
+ * stall Default determined according to the type of
+ * USB device controller (usually true),
+ * boolean to permit the driver to halt
+ * bulk endpoints
* transport=XXX Default BBB, transport name (CB, CBI, or BBB)
* protocol=YYY Default SCSI, protocol name (RBC, 8020 or
* ATAPI, QIC, UFI, 8070, or SCSI;
* buflen=N Default N=16384, buffer size used (will be
* rounded down to a multiple of
* PAGE_CACHE_SIZE)
- * stall Default determined according to the type of
- * USB device controller (usually true),
- * boolean to permit the driver to halt
- * bulk endpoints
*
* If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "ro",
- * "removable", and "luns" options are available; default values are used
- * for everything else.
+ * "removable", "luns", and "stall" options are available; default values
+ * are used for everything else.
*
* The pathnames of the backing files and the ro settings are available in
* the attribute files "file" and "ro" in the lun<n> subdirectory of the
int num_ros;
unsigned int nluns;
+ int removable;
+ int can_stall;
+
char *transport_parm;
char *protocol_parm;
- int removable;
unsigned short vendor;
unsigned short product;
unsigned short release;
unsigned int buflen;
- int can_stall;
int transport_type;
char *transport_name;
.transport_parm = "BBB",
.protocol_parm = "SCSI",
.removable = 0,
+ .can_stall = 1,
.vendor = DRIVER_VENDOR_ID,
.product = DRIVER_PRODUCT_ID,
.release = 0xffff, // Use controller chip type
.buflen = 16384,
- .can_stall = 1,
};
module_param_named(removable, mod_data.removable, bool, S_IRUGO);
MODULE_PARM_DESC(removable, "true to simulate removable media");
+module_param_named(stall, mod_data.can_stall, bool, S_IRUGO);
+MODULE_PARM_DESC(stall, "false to prevent bulk stalls");
+
/* In the non-TEST version, only the module parameters listed above
* are available. */
module_param_named(buflen, mod_data.buflen, uint, S_IRUGO);
MODULE_PARM_DESC(buflen, "I/O buffer size");
-module_param_named(stall, mod_data.can_stall, bool, S_IRUGO);
-MODULE_PARM_DESC(stall, "false to prevent bulk stalls");
-
#endif /* CONFIG_USB_FILE_STORAGE_TEST */
buf[0] = val >> 24;
buf[1] = val >> 16;
buf[2] = val >> 8;
- buf[3] = val;
+ buf[3] = val & 0xff;
}
{
struct usb_request *req = fsg->ep0req;
int value = -EOPNOTSUPP;
- u16 w_index = ctrl->wIndex;
- u16 w_length = ctrl->wLength;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_length = le16_to_cpu(ctrl->wLength);
if (!fsg->config)
return value;
}
VDBG(fsg, "get max LUN\n");
*(u8 *) req->buf = fsg->nluns - 1;
- value = min(w_length, (u16) 1);
+ value = 1;
break;
}
}
"unknown class-specific control req "
"%02x.%02x v%04x i%04x l%u\n",
ctrl->bRequestType, ctrl->bRequest,
- ctrl->wValue, w_index, w_length);
+ le16_to_cpu(ctrl->wValue), w_index, w_length);
return value;
}
{
struct usb_request *req = fsg->ep0req;
int value = -EOPNOTSUPP;
- u16 w_index = ctrl->wIndex;
- u16 w_value = ctrl->wValue;
- u16 w_length = ctrl->wLength;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
/* Usually this just stores reply data in the pre-allocated ep0 buffer,
* but config change events will also reconfigure hardware. */
case USB_DT_DEVICE:
VDBG(fsg, "get device descriptor\n");
- value = min(w_length, (u16) sizeof device_desc);
+ value = sizeof device_desc;
memcpy(req->buf, &device_desc, value);
break;
#ifdef CONFIG_USB_GADGET_DUALSPEED
VDBG(fsg, "get device qualifier\n");
if (!fsg->gadget->is_dualspeed)
break;
- value = min(w_length, (u16) sizeof dev_qualifier);
+ value = sizeof dev_qualifier;
memcpy(req->buf, &dev_qualifier, value);
break;
req->buf,
w_value >> 8,
w_value & 0xff);
- if (value >= 0)
- value = min(w_length, (u16) value);
break;
case USB_DT_STRING:
/* wIndex == language code */
value = usb_gadget_get_string(&stringtab,
w_value & 0xff, req->buf);
- if (value >= 0)
- value = min(w_length, (u16) value);
break;
}
break;
break;
VDBG(fsg, "get configuration\n");
*(u8 *) req->buf = fsg->config;
- value = min(w_length, (u16) 1);
+ value = 1;
break;
case USB_REQ_SET_INTERFACE:
}
VDBG(fsg, "get interface\n");
*(u8 *) req->buf = 0;
- value = min(w_length, (u16) 1);
+ value = 1;
break;
default:
VDBG(fsg,
"unknown control req %02x.%02x v%04x i%04x l%u\n",
ctrl->bRequestType, ctrl->bRequest,
- w_value, w_index, w_length);
+ w_value, w_index, le16_to_cpu(ctrl->wLength));
}
return value;
{
struct fsg_dev *fsg = get_gadget_data(gadget);
int rc;
+ int w_length = le16_to_cpu(ctrl->wLength);
++fsg->ep0_req_tag; // Record arrival of a new request
fsg->ep0req->context = NULL;
/* Respond with data/status or defer until later? */
if (rc >= 0 && rc != DELAYED_STATUS) {
+ rc = min(rc, w_length);
fsg->ep0req->length = rc;
- fsg->ep0req->zero = (rc < ctrl->wLength &&
- (rc % gadget->ep0->maxpacket) == 0);
+ fsg->ep0req->zero = rc < w_length;
fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ?
"ep0-in" : "ep0-out");
rc = ep0_queue(fsg);
}
}
- /* Check that the LUN values are oonsistent */
+ /* Check that the LUN values are consistent */
if (transport_is_bbb()) {
if (fsg->lun != lun)
DBG(fsg, "using LUN %d from CBW, "