pci: use pci_ioremap_bar() in drivers/ide

[linux-2.6-omap-h63xx.git] / drivers / usb / gadget / printer.c

diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index e0090085b78ee74824ff2a3940a419a129e9570b..5a3034fdfe473f0f777e80bd426d2882a8e9fd53 100644 (file)
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -53,6 +53,20 @@
 
 #include "gadget_chips.h"
 
+
+/*
+ * Kbuild is not very cooperative with respect to linking separately
+ * compiled library objects into one module.  So for now we won't use
+ * separate compilation ... ensuring init/exit sections work to shrink
+ * the runtime footprint, and giving us at least some parts of what
+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ */
+#include "usbstring.c"
+#include "config.c"
+#include "epautoconf.c"
+
+/*-------------------------------------------------------------------------*/
+
 #define DRIVER_DESC            "Printer Gadget"
 #define DRIVER_VERSION         "2007 OCT 06"
 
@@ -238,7 +252,7 @@ static struct usb_config_descriptor config_desc = {
        .bConfigurationValue =  DEV_CONFIG_VALUE,
        .iConfiguration =       0,
        .bmAttributes =         USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
-       .bMaxPower =            1       /* Self-Powered */
+       .bMaxPower =            CONFIG_USB_GADGET_VBUS_DRAW / 2,
 };
 
 static struct usb_interface_descriptor intf_desc = {
@@ -1264,8 +1278,7 @@ unknown:
        /* respond with data transfer before status phase? */
        if (value >= 0) {
                req->length = value;
-               req->zero = value < wLength
-                               && (value % gadget->ep0->maxpacket) == 0;
+               req->zero = value < wLength;
                value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
                if (value < 0) {
                        DBG(dev, "ep_queue --> %d\n", value);
@@ -1360,8 +1373,8 @@ printer_bind(struct usb_gadget *gadget)
 
 
        /* Setup the sysfs files for the printer gadget. */
-       dev->pdev = device_create_drvdata(usb_gadget_class, NULL,
-                                         g_printer_devno, NULL, "g_printer");
+       dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
+                                 NULL, "g_printer");
        if (IS_ERR(dev->pdev)) {
                ERROR(dev, "Failed to create device: g_printer\n");
                goto fail;
@@ -1463,7 +1476,6 @@ autoconf_fail:
        if (gadget->is_otg) {
                otg_desc.bmAttributes |= USB_OTG_HNP,
                config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
-               config_desc.bMaxPower = 4;
        }
 
        spin_lock_init(&dev->lock);