#include "../core/hcd.h"
#include "isp116x.h"
-#define DRIVER_VERSION "08 Apr 2005"
+#define DRIVER_VERSION "05 Aug 2005"
#define DRIVER_DESC "ISP116x USB Host Controller Driver"
MODULE_DESCRIPTION(DRIVER_DESC);
usb_settoggle(udev, ep->epnum,
ep->nextpid ==
USB_PID_OUT,
- PTD_GET_TOGGLE(ptd) ^ 1);
+ PTD_GET_TOGGLE(ptd));
+ urb->actual_length += PTD_GET_COUNT(ptd);
urb->status = cc_to_error[TD_DATAUNDERRUN];
spin_unlock(&urb->lock);
continue;
ERR("Unrecoverable error\n");
/* What should we do here? Reset? */
}
- if (intstat & HCINT_RHSC) {
- isp116x->rhstatus =
- isp116x_read_reg32(isp116x, HCRHSTATUS);
- isp116x->rhport[0] =
- isp116x_read_reg32(isp116x, HCRHPORT1);
- isp116x->rhport[1] =
- isp116x_read_reg32(isp116x, HCRHPORT2);
- }
+ if (intstat & HCINT_RHSC)
+ /* When root hub or any of its ports is going
+ to come out of suspend, it may take more
+ than 10ms for status bits to stabilize. */
+ mod_timer(&hcd->rh_timer, jiffies
+ + msecs_to_jiffies(20) + 1);
if (intstat & HCINT_RD) {
DBG("---- remote wakeup\n");
- schedule_work(&isp116x->rh_resume);
+ usb_hcd_resume_root_hub(hcd);
ret = IRQ_HANDLED;
}
irqstat &= ~HCuPINT_OPR;
static int isp116x_urb_enqueue(struct usb_hcd *hcd,
struct usb_host_endpoint *hep, struct urb *urb,
- unsigned mem_flags)
+ gfp_t mem_flags)
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
struct usb_device *udev = urb->dev;
}
/* avoid all allocations within spinlocks: request or endpoint */
if (!hep->hcpriv) {
- ep = kcalloc(1, sizeof *ep, mem_flags);
+ ep = kzalloc(sizeof *ep, mem_flags);
if (!ep)
return -ENOMEM;
}
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
int ports, i, changed = 0;
+ unsigned long flags;
if (!HC_IS_RUNNING(hcd->state))
return -ESHUTDOWN;
- ports = isp116x->rhdesca & RH_A_NDP;
+ /* Report no status change now, if we are scheduled to be
+ called later */
+ if (timer_pending(&hcd->rh_timer))
+ return 0;
- /* init status */
+ ports = isp116x->rhdesca & RH_A_NDP;
+ spin_lock_irqsave(&isp116x->lock, flags);
+ isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS);
if (isp116x->rhstatus & (RH_HS_LPSC | RH_HS_OCIC))
buf[0] = changed = 1;
else
buf[0] = 0;
for (i = 0; i < ports; i++) {
- u32 status = isp116x->rhport[i];
+ u32 status = isp116x->rhport[i] =
+ isp116x_read_reg32(isp116x, i ? HCRHPORT2 : HCRHPORT1);
if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
| RH_PS_OCIC | RH_PS_PRSC)) {
continue;
}
}
+ spin_unlock_irqrestore(&isp116x->lock, flags);
return changed;
}
#ifdef CONFIG_PM
-static int isp116x_hub_suspend(struct usb_hcd *hcd)
+static int isp116x_bus_suspend(struct usb_hcd *hcd)
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
unsigned long flags;
return ret;
}
-static int isp116x_hub_resume(struct usb_hcd *hcd)
+static int isp116x_bus_resume(struct usb_hcd *hcd)
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
u32 val;
return 0;
}
-static void isp116x_rh_resume(void *_hcd)
-{
- struct usb_hcd *hcd = _hcd;
-
- usb_resume_device(hcd->self.root_hub);
-}
#else
-#define isp116x_hub_suspend NULL
-#define isp116x_hub_resume NULL
-
-static void isp116x_rh_resume(void *_hcd)
-{
-}
+#define isp116x_bus_suspend NULL
+#define isp116x_bus_resume NULL
#endif
return ret;
}
-/*
- Reset. Tries to perform platform-specific hardware
- reset first; falls back to software reset.
-*/
static int isp116x_reset(struct usb_hcd *hcd)
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
u16 clkrdy = 0;
int ret = 0, timeout = 15 /* ms */ ;
- if (isp116x->board && isp116x->board->reset) {
- /* Hardware reset */
- isp116x->board->reset(hcd->self.controller, 1);
- msleep(10);
- if (isp116x->board->clock)
- isp116x->board->clock(hcd->self.controller, 1);
- msleep(1);
- isp116x->board->reset(hcd->self.controller, 0);
- } else
- ret = isp116x_sw_reset(isp116x);
-
+ ret = isp116x_sw_reset(isp116x);
if (ret)
return ret;
ERR("Clock not ready after 20ms\n");
/* After sw_reset the clock won't report to be ready, if
H_WAKEUP pin is high. */
- if (!isp116x->board || !isp116x->board->reset)
- ERR("The driver does not support hardware wakeup.\n");
- ERR("Please make sure that the H_WAKEUP pin "
- "is pulled low!\n");
+ ERR("Please make sure that the H_WAKEUP pin is pulled low!\n");
ret = -ENODEV;
}
return ret;
isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS);
spin_unlock_irqrestore(&isp116x->lock, flags);
- /* Put the chip into reset state */
- if (isp116x->board && isp116x->board->reset)
- isp116x->board->reset(hcd->self.controller, 0);
- else
- isp116x_sw_reset(isp116x);
-
- /* Stop the clock */
- if (isp116x->board && isp116x->board->clock)
- isp116x->board->clock(hcd->self.controller, 0);
+ isp116x_sw_reset(isp116x);
}
/*
return -ENODEV;
}
+ /* To be removed in future */
+ hcd->uses_new_polling = 1;
+
isp116x_write_reg16(isp116x, HCITLBUFLEN, ISP116x_ITL_BUFSIZE);
isp116x_write_reg16(isp116x, HCATLBUFLEN, ISP116x_ATL_BUFSIZE);
if (board->sel15Kres)
val |= HCHWCFG_15KRSEL;
/* Remote wakeup won't work without working clock */
- if (board->clknotstop || board->remote_wakeup_enable)
+ if (board->remote_wakeup_enable)
val |= HCHWCFG_CLKNOTSTOP;
if (board->oc_enable)
val |= HCHWCFG_ANALOG_OC;
isp116x_write_reg16(isp116x, HCHWCFG, val);
/* ----- Root hub conf */
- val = 0;
- /* AN10003_1.pdf recommends NPS to be always 1 */
- if (board->no_power_switching)
- val |= RH_A_NPS;
- if (board->power_switching_mode)
- val |= RH_A_PSM;
- if (board->potpg)
- val |= (board->potpg << 24) & RH_A_POTPGT;
- else
- val |= (25 << 24) & RH_A_POTPGT;
+ val = (25 << 24) & RH_A_POTPGT;
+ /* AN10003_1.pdf recommends RH_A_NPS (no power switching) to
+ be always set. Yet, instead, we request individual port
+ power switching. */
+ val |= RH_A_PSM;
+ /* Report overcurrent per port */
+ val |= RH_A_OCPM;
isp116x_write_reg32(isp116x, HCRHDESCA, val);
isp116x->rhdesca = isp116x_read_reg32(isp116x, HCRHDESCA);
/* Go operational */
val = HCCONTROL_USB_OPER;
- /* Remote wakeup connected - NOT SUPPORTED */
- /* if (board->remote_wakeup_connected)
- val |= HCCONTROL_RWC; */
if (board->remote_wakeup_enable)
val |= HCCONTROL_RWE;
isp116x_write_reg32(isp116x, HCCONTROL, val);
.hub_status_data = isp116x_hub_status_data,
.hub_control = isp116x_hub_control,
- .hub_suspend = isp116x_hub_suspend,
- .hub_resume = isp116x_hub_resume,
+ .bus_suspend = isp116x_bus_suspend,
+ .bus_resume = isp116x_bus_resume,
};
/*----------------------------------------------------------------*/
struct platform_device *pdev;
struct resource *res;
- if(!hcd)
+ if (!hcd)
return 0;
isp116x = hcd_to_isp116x(hcd);
pdev = container_of(dev, struct platform_device, dev);
isp116x->addr_reg = addr_reg;
spin_lock_init(&isp116x->lock);
INIT_LIST_HEAD(&isp116x->async);
- INIT_WORK(&isp116x->rh_resume, isp116x_rh_resume, hcd);
isp116x->board = dev->platform_data;
if (!isp116x->board) {
/*
Suspend of platform device
*/
-static int isp116x_suspend(struct device *dev, pm_message_t state, u32 phase)
+static int isp116x_suspend(struct device *dev, pm_message_t state)
{
int ret = 0;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
-
- VDBG("%s: state %x, phase %x\n", __func__, state, phase);
- if (phase != SUSPEND_DISABLE && phase != SUSPEND_POWER_DOWN)
- return 0;
+ VDBG("%s: state %x\n", __func__, state);
- ret = usb_suspend_device(hcd->self.root_hub, state);
- if (!ret) {
- dev->power.power_state = state;
- INFO("%s suspended\n", hcd_name);
- } else
- ERR("%s suspend failed\n", hcd_name);
+ dev->power.power_state = state;
return ret;
}
/*
Resume platform device
*/
-static int isp116x_resume(struct device *dev, u32 phase)
+static int isp116x_resume(struct device *dev)
{
int ret = 0;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
- VDBG("%s: state %x, phase %x\n", __func__, dev->power.power_state,
- phase);
- if (phase != RESUME_POWER_ON)
- return 0;
+ VDBG("%s: state %x\n", __func__, dev->power.power_state);
+
+ dev->power.power_state = PMSG_ON;
- ret = usb_resume_device(hcd->self.root_hub);
- if (!ret) {
- dev->power.power_state = PMSG_ON;
- VDBG("%s resumed\n", (char *)hcd_name);
- }
return ret;
}
projects / linux-2.6-omap-h63xx.git / blobdiff