* driver for Philips PNX4008 USB Host
*
* Authors: Dmitry Chigirev <source@mvista.com>
- * Vitaly Wool <vitalywool@gmail.com>
+ * Vitaly Wool <vitalywool@gmail.com>
*
* register initialization is based on code examples provided by Philips
* Copyright (c) 2005 Koninklijke Philips Electronics N.V.
#include <asm/arch/irqs.h>
#include <asm/arch/gpio.h>
-#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
+#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
/* USB_CTRL bit defines */
#define USB_SLAVE_HCLK_EN (1 << 24)
static int isp1301_command(struct i2c_client *client, unsigned int cmd,
void *arg);
-static unsigned short normal_i2c[] =
+static const unsigned short normal_i2c[] =
{ ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END };
-static unsigned short dummy_i2c_addrlist[] = { I2C_CLIENT_END };
+static const unsigned short dummy_i2c_addrlist[] = { I2C_CLIENT_END };
static struct i2c_client_address_data addr_data = {
.normal_i2c = normal_i2c,
};
struct i2c_driver isp1301_driver = {
- .id = I2C_DRIVERID_I2CDEV, /* Fake Id */
.class = I2C_CLASS_HWMON,
.attach_adapter = isp1301_probe,
.detach_client = isp1301_detach,
{
struct i2c_client *c;
- c = (struct i2c_client *)kzalloc(sizeof(*c), SLAB_KERNEL);
+ c = kzalloc(sizeof(*c), GFP_KERNEL);
if (!c)
return -ENOMEM;
*/
.start = ohci_pnx4008_start,
.stop = ohci_stop,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
-
+ .hub_irq_enable = ohci_rhsc_enable,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
.start_port_reset = ohci_start_port_reset,
};
goto out4;
}
- hcd->self.hcpriv = (void *)hcd;
-
pnx4008_start_hc();
platform_set_drvdata(pdev, hcd);
ohci = hcd_to_ohci(hcd);
ohci_hcd_init(ohci);
dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
- ret = usb_add_hcd(hcd, irq, SA_INTERRUPT);
+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
if (ret == 0)
return ret;
.remove = usb_hcd_pnx4008_remove,
};
-static int __init usb_hcd_pnx4008_init(void)
-{
- return platform_driver_register(&usb_hcd_pnx4008_driver);
-}
-
-static void __exit usb_hcd_pnx4008_cleanup(void)
-{
- return platform_driver_unregister(&usb_hcd_pnx4008_driver);
-}
-
-module_init(usb_hcd_pnx4008_init);
-module_exit(usb_hcd_pnx4008_cleanup);