* PRECONDITION: ohci lock held, irqs blocked.
*/
static void
-finish_urb (struct ohci_hcd *ohci, struct urb *urb)
+finish_urb(struct ohci_hcd *ohci, struct urb *urb, int status)
__releases(ohci->lock)
__acquires(ohci->lock)
{
// ASSERT (urb->hcpriv != 0);
urb_free_priv (ohci, urb->hcpriv);
- urb->hcpriv = NULL;
-
- spin_lock (&urb->lock);
- if (likely (urb->status == -EINPROGRESS))
- urb->status = 0;
- /* report short control reads right even though the data TD always
- * has TD_R set. (much simpler, but creates the 1-td limit.)
- */
- if (unlikely (urb->transfer_flags & URB_SHORT_NOT_OK)
- && unlikely (usb_pipecontrol (urb->pipe))
- && urb->actual_length < urb->transfer_buffer_length
- && usb_pipein (urb->pipe)
- && urb->status == 0) {
- urb->status = -EREMOTEIO;
- }
- spin_unlock (&urb->lock);
+ if (likely(status == -EINPROGRESS))
+ status = 0;
switch (usb_pipetype (urb->pipe)) {
case PIPE_ISOCHRONOUS:
}
#ifdef OHCI_VERBOSE_DEBUG
- urb_print (urb, "RET", usb_pipeout (urb->pipe));
+ urb_print(urb, "RET", usb_pipeout (urb->pipe), status);
#endif
/* urb->complete() can reenter this HCD */
+ usb_hcd_unlink_urb_from_ep(ohci_to_hcd(ohci), urb);
spin_unlock (&ohci->lock);
- usb_hcd_giveback_urb (ohci_to_hcd(ohci), urb);
+ usb_hcd_giveback_urb(ohci_to_hcd(ohci), urb, status);
spin_lock (&ohci->lock);
/* stop periodic dma if it's not needed */
ed->ed_prev = NULL;
ed->ed_next = NULL;
ed->hwNextED = 0;
+ if (quirk_zfmicro(ohci)
+ && (ed->type == PIPE_INTERRUPT)
+ && !(ohci->eds_scheduled++))
+ mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ));
wmb ();
/* we care about rm_list when setting CLE/BLE in case the HC was at
* Done List handling functions
*-------------------------------------------------------------------------*/
-/* calculate transfer length/status and update the urb
- * PRECONDITION: irqsafe (only for urb->status locking)
- */
-static void td_done (struct ohci_hcd *ohci, struct urb *urb, struct td *td)
+/* calculate transfer length/status and update the urb */
+static int td_done(struct ohci_hcd *ohci, struct urb *urb, struct td *td)
{
u32 tdINFO = hc32_to_cpup (ohci, &td->hwINFO);
int cc = 0;
+ int status = -EINPROGRESS;
list_del (&td->td_list);
/* ISO ... drivers see per-TD length/status */
if (tdINFO & TD_ISO) {
- u16 tdPSW = ohci_hwPSW (ohci, td, 0);
+ u16 tdPSW = ohci_hwPSW(ohci, td, 0);
int dlen = 0;
/* NOTE: assumes FC in tdINFO == 0, and that
cc = (tdPSW >> 12) & 0xF;
if (tdINFO & TD_CC) /* hc didn't touch? */
- return;
+ return status;
if (usb_pipeout (urb->pipe))
dlen = urb->iso_frame_desc [td->index].length;
if (cc == TD_DATAUNDERRUN
&& !(urb->transfer_flags & URB_SHORT_NOT_OK))
cc = TD_CC_NOERROR;
- if (cc != TD_CC_NOERROR && cc < 0x0E) {
- spin_lock (&urb->lock);
- if (urb->status == -EINPROGRESS)
- urb->status = cc_to_error [cc];
- spin_unlock (&urb->lock);
- }
+ if (cc != TD_CC_NOERROR && cc < 0x0E)
+ status = cc_to_error[cc];
/* count all non-empty packets except control SETUP packet */
if ((type != PIPE_CONTROL || td->index != 0) && tdBE != 0) {
urb->actual_length,
urb->transfer_buffer_length);
}
+ return status;
}
/*-------------------------------------------------------------------------*/
-static inline struct td *
-ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev)
+static void ed_halted(struct ohci_hcd *ohci, struct td *td, int cc)
{
struct urb *urb = td->urb;
+ urb_priv_t *urb_priv = urb->hcpriv;
struct ed *ed = td->ed;
struct list_head *tmp = td->td_list.next;
__hc32 toggle = ed->hwHeadP & cpu_to_hc32 (ohci, ED_C);
wmb ();
ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_H);
- /* put any later tds from this urb onto the donelist, after 'td',
- * order won't matter here: no errors, and nothing was transferred.
- * also patch the ed so it looks as if those tds completed normally.
+ /* Get rid of all later tds from this urb. We don't have
+ * to be careful: no errors and nothing was transferred.
+ * Also patch the ed so it looks as if those tds completed normally.
*/
while (tmp != &ed->td_list) {
struct td *next;
- __hc32 info;
next = list_entry (tmp, struct td, td_list);
tmp = next->td_list.next;
* then we need to leave the control STATUS packet queued
* and clear ED_SKIP.
*/
- info = next->hwINFO;
- info |= cpu_to_hc32 (ohci, TD_DONE);
- info &= ~cpu_to_hc32 (ohci, TD_CC);
- next->hwINFO = info;
-
- next->next_dl_td = rev;
- rev = next;
+ list_del(&next->td_list);
+ urb_priv->td_cnt++;
ed->hwHeadP = next->hwNextTD | toggle;
}
hc32_to_cpu (ohci, td->hwINFO),
cc, cc_to_error [cc]);
}
-
- return rev;
}
/* replies to the request have to be on a FIFO basis so
*/
if (cc != TD_CC_NOERROR
&& (td->ed->hwHeadP & cpu_to_hc32 (ohci, ED_H)))
- td_rev = ed_halted (ohci, td, cc, td_rev);
+ ed_halted(ohci, td, cc);
td->next_dl_td = td_rev;
td_rev = td;
TD_MASK;
/* INTR_WDH may need to clean up first */
- if (td->td_dma != head)
- goto skip_ed;
+ if (td->td_dma != head) {
+ if (ed == ohci->ed_to_check)
+ ohci->ed_to_check = NULL;
+ else
+ goto skip_ed;
+ }
}
}
urb = td->urb;
urb_priv = td->urb->hcpriv;
- if (urb->status == -EINPROGRESS) {
+ if (!urb->unlinked) {
prev = &td->hwNextTD;
continue;
}
/* if URB is done, clean up */
if (urb_priv->td_cnt == urb_priv->length) {
modified = completed = 1;
- finish_urb (ohci, urb);
+ finish_urb(ohci, urb, 0);
}
}
if (completed && !list_empty (&ed->td_list))
/* ED's now officially unlinked, hc doesn't see */
ed->state = ED_IDLE;
+ if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
+ ohci->eds_scheduled--;
ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_H);
ed->hwNextED = 0;
wmb ();
if (ohci->ed_controltail) {
command |= OHCI_CLF;
- if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+ if (quirk_zfmicro(ohci))
mdelay(1);
if (!(ohci->hc_control & OHCI_CTRL_CLE)) {
control |= OHCI_CTRL_CLE;
}
if (ohci->ed_bulktail) {
command |= OHCI_BLF;
- if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+ if (quirk_zfmicro(ohci))
mdelay(1);
if (!(ohci->hc_control & OHCI_CTRL_BLE)) {
control |= OHCI_CTRL_BLE;
/* CLE/BLE to enable, CLF/BLF to (maybe) kickstart */
if (control) {
ohci->hc_control |= control;
- if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+ if (quirk_zfmicro(ohci))
mdelay(1);
ohci_writel (ohci, ohci->hc_control,
&ohci->regs->control);
}
if (command) {
- if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+ if (quirk_zfmicro(ohci))
mdelay(1);
ohci_writel (ohci, command, &ohci->regs->cmdstatus);
}
/*-------------------------------------------------------------------------*/
+/*
+ * Used to take back a TD from the host controller. This would normally be
+ * called from within dl_done_list, however it may be called directly if the
+ * HC no longer sees the TD and it has not appeared on the donelist (after
+ * two frames). This bug has been observed on ZF Micro systems.
+ */
+static void takeback_td(struct ohci_hcd *ohci, struct td *td)
+{
+ struct urb *urb = td->urb;
+ urb_priv_t *urb_priv = urb->hcpriv;
+ struct ed *ed = td->ed;
+ int status;
+
+ /* update URB's length and status from TD */
+ status = td_done(ohci, urb, td);
+ urb_priv->td_cnt++;
+
+ /* If all this urb's TDs are done, call complete() */
+ if (urb_priv->td_cnt == urb_priv->length)
+ finish_urb(ohci, urb, status);
+
+ /* clean schedule: unlink EDs that are no longer busy */
+ if (list_empty(&ed->td_list)) {
+ if (ed->state == ED_OPER)
+ start_ed_unlink(ohci, ed);
+
+ /* ... reenabling halted EDs only after fault cleanup */
+ } else if ((ed->hwINFO & cpu_to_hc32(ohci, ED_SKIP | ED_DEQUEUE))
+ == cpu_to_hc32(ohci, ED_SKIP)) {
+ td = list_entry(ed->td_list.next, struct td, td_list);
+ if (!(td->hwINFO & cpu_to_hc32(ohci, TD_DONE))) {
+ ed->hwINFO &= ~cpu_to_hc32(ohci, ED_SKIP);
+ /* ... hc may need waking-up */
+ switch (ed->type) {
+ case PIPE_CONTROL:
+ ohci_writel(ohci, OHCI_CLF,
+ &ohci->regs->cmdstatus);
+ break;
+ case PIPE_BULK:
+ ohci_writel(ohci, OHCI_BLF,
+ &ohci->regs->cmdstatus);
+ break;
+ }
+ }
+ }
+}
+
/*
* Process normal completions (error or success) and clean the schedules.
*
* This is the main path for handing urbs back to drivers. The only other
- * path is finish_unlinks(), which unlinks URBs using ed_rm_list, instead of
- * scanning the (re-reversed) donelist as this does.
+ * normal path is finish_unlinks(), which unlinks URBs using ed_rm_list,
+ * instead of scanning the (re-reversed) donelist as this does. There's
+ * an abnormal path too, handling a quirk in some Compaq silicon: URBs
+ * with TDs that appear to be orphaned are directly reclaimed.
*/
static void
dl_done_list (struct ohci_hcd *ohci)
while (td) {
struct td *td_next = td->next_dl_td;
- struct urb *urb = td->urb;
- urb_priv_t *urb_priv = urb->hcpriv;
- struct ed *ed = td->ed;
-
- /* update URB's length and status from TD */
- td_done (ohci, urb, td);
- urb_priv->td_cnt++;
-
- /* If all this urb's TDs are done, call complete() */
- if (urb_priv->td_cnt == urb_priv->length)
- finish_urb (ohci, urb);
-
- /* clean schedule: unlink EDs that are no longer busy */
- if (list_empty (&ed->td_list)) {
- if (ed->state == ED_OPER)
- start_ed_unlink (ohci, ed);
-
- /* ... reenabling halted EDs only after fault cleanup */
- } else if ((ed->hwINFO & cpu_to_hc32 (ohci,
- ED_SKIP | ED_DEQUEUE))
- == cpu_to_hc32 (ohci, ED_SKIP)) {
- td = list_entry (ed->td_list.next, struct td, td_list);
- if (!(td->hwINFO & cpu_to_hc32 (ohci, TD_DONE))) {
- ed->hwINFO &= ~cpu_to_hc32 (ohci, ED_SKIP);
- /* ... hc may need waking-up */
- switch (ed->type) {
- case PIPE_CONTROL:
- ohci_writel (ohci, OHCI_CLF,
- &ohci->regs->cmdstatus);
- break;
- case PIPE_BULK:
- ohci_writel (ohci, OHCI_BLF,
- &ohci->regs->cmdstatus);
- break;
- }
- }
- }
-
+ takeback_td(ohci, td);
td = td_next;
}
}
projects / linux-2.6-omap-h63xx.git / blobdiff