* (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
* support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
* (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
- * (C) Copyright 2004-2006 Alan Stern, stern@rowland.harvard.edu
+ * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
*
* Intel documents this fairly well, and as far as I know there
* are no royalties or anything like that, but even so there are
* interrupt QHs, which will help spread out bandwidth utilization.
*
* ffs (Find First bit Set) does exactly what we need:
- * 1,3,5,... => ffs = 0 => use skel_int2_qh = skelqh[8],
- * 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[7], etc.
+ * 1,3,5,... => ffs = 0 => use period-2 QH = skelqh[8],
+ * 2,6,10,... => ffs = 1 => use period-4 QH = skelqh[7], etc.
* ffs >= 7 => not on any high-period queue, so use
- * skel_int1_qh = skelqh[9].
+ * period-1 QH = skelqh[9].
* Add in UHCI_NUMFRAMES to insure at least one bit is set.
*/
skelnum = 8 - (int) __ffs(frame | UHCI_NUMFRAMES);
if (skelnum <= 1)
skelnum = 9;
- return UHCI_PTR_QH | cpu_to_le32(uhci->skelqh[skelnum]->dma_handle);
+ return LINK_TO_QH(uhci->skelqh[skelnum]);
}
#include "uhci-debug.c"
static int remote_wakeup_is_broken(struct uhci_hcd *uhci)
{
int port;
- char *sys_info;
+ const char *sys_info;
static char bad_Asus_board[] = "A7V8X";
/* One of Asus's motherboards has a bug which causes it to
{
int auto_stop;
int int_enable, egsm_enable;
+ struct usb_device *rhdev = uhci_to_hcd(uhci)->self.root_hub;
auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
- dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev,
- "%s%s\n", __FUNCTION__,
+ dev_dbg(&rhdev->dev, "%s%s\n", __func__,
(auto_stop ? " (auto-stop)" : ""));
- /* If we get a suspend request when we're already auto-stopped
- * then there's nothing to do.
- */
- if (uhci->rh_state == UHCI_RH_AUTO_STOPPED) {
- uhci->rh_state = new_state;
- return;
- }
-
/* Enable resume-detect interrupts if they work.
* Then enter Global Suspend mode if _it_ works, still configured.
*/
if (remote_wakeup_is_broken(uhci))
egsm_enable = 0;
if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable ||
- !device_may_wakeup(
- &uhci_to_hcd(uhci)->self.root_hub->dev))
+#ifdef CONFIG_PM
+ (!auto_stop && !rhdev->do_remote_wakeup) ||
+#endif
+ (auto_stop && !device_may_wakeup(&rhdev->dev)))
uhci->working_RD = int_enable = 0;
outw(int_enable, uhci->io_addr + USBINTR);
return;
}
if (!(inw(uhci->io_addr + USBSTS) & USBSTS_HCH))
- dev_warn(&uhci_to_hcd(uhci)->self.root_hub->dev,
- "Controller not stopped yet!\n");
+ dev_warn(uhci_dev(uhci), "Controller not stopped yet!\n");
uhci_get_current_frame_number(uhci);
__acquires(uhci->lock)
{
dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev,
- "%s%s\n", __FUNCTION__,
+ "%s%s\n", __func__,
uhci->rh_state == UHCI_RH_AUTO_STOPPED ?
" (auto-start)" : "");
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
unsigned short status;
- unsigned long flags;
/*
* Read the interrupt status, and write it back to clear the
dev_err(uhci_dev(uhci), "host controller process "
"error, something bad happened!\n");
if (status & USBSTS_HCH) {
- spin_lock_irqsave(&uhci->lock, flags);
+ spin_lock(&uhci->lock);
if (uhci->rh_state >= UHCI_RH_RUNNING) {
dev_err(uhci_dev(uhci),
"host controller halted, "
* pending unlinks */
mod_timer(&hcd->rh_timer, jiffies);
}
- spin_unlock_irqrestore(&uhci->lock, flags);
+ spin_unlock(&uhci->lock);
}
}
if (status & USBSTS_RD)
usb_hcd_poll_rh_status(hcd);
else {
- spin_lock_irqsave(&uhci->lock, flags);
+ spin_lock(&uhci->lock);
uhci_scan_schedule(uhci);
- spin_unlock_irqrestore(&uhci->lock, flags);
+ spin_unlock(&uhci->lock);
}
return IRQ_HANDLED;
*
* The hardware doesn't really know any difference
* in the queues, but the order does matter for the
- * protocols higher up. The order is:
+ * protocols higher up. The order in which the queues
+ * are encountered by the hardware is:
*
- * - any isochronous events handled before any
+ * - All isochronous events are handled before any
* of the queues. We don't do that here, because
* we'll create the actual TD entries on demand.
- * - The first queue is the interrupt queue.
- * - The second queue is the control queue, split into low- and full-speed
- * - The third queue is bulk queue.
- * - The fourth queue is the bandwidth reclamation queue, which loops back
- * to the full-speed control queue.
+ * - The first queue is the high-period interrupt queue.
+ * - The second queue is the period-1 interrupt and async
+ * (low-speed control, full-speed control, then bulk) queue.
+ * - The third queue is the terminating bandwidth reclamation queue,
+ * which contains no members, loops back to itself, and is present
+ * only when FSBR is on and there are no full-speed control or bulk QHs.
*/
static int uhci_start(struct usb_hcd *hcd)
{
}
/*
- * 8 Interrupt queues; link all higher int queues to int1,
- * then link int1 to control and control to bulk
+ * 8 Interrupt queues; link all higher int queues to int1 = async
*/
- uhci->skel_int128_qh->link =
- uhci->skel_int64_qh->link =
- uhci->skel_int32_qh->link =
- uhci->skel_int16_qh->link =
- uhci->skel_int8_qh->link =
- uhci->skel_int4_qh->link =
- uhci->skel_int2_qh->link = UHCI_PTR_QH |
- cpu_to_le32(uhci->skel_int1_qh->dma_handle);
-
- uhci->skel_int1_qh->link = UHCI_PTR_QH |
- cpu_to_le32(uhci->skel_ls_control_qh->dma_handle);
- uhci->skel_ls_control_qh->link = UHCI_PTR_QH |
- cpu_to_le32(uhci->skel_fs_control_qh->dma_handle);
- uhci->skel_fs_control_qh->link = UHCI_PTR_QH |
- cpu_to_le32(uhci->skel_bulk_qh->dma_handle);
- uhci->skel_bulk_qh->link = UHCI_PTR_QH |
- cpu_to_le32(uhci->skel_term_qh->dma_handle);
+ for (i = SKEL_ISO + 1; i < SKEL_ASYNC; ++i)
+ uhci->skelqh[i]->link = LINK_TO_QH(uhci->skel_async_qh);
+ uhci->skel_async_qh->link = UHCI_PTR_TERM;
+ uhci->skel_term_qh->link = LINK_TO_QH(uhci->skel_term_qh);
/* This dummy TD is to work around a bug in Intel PIIX controllers */
uhci_fill_td(uhci->term_td, 0, uhci_explen(0) |
- (0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
- uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle);
-
- uhci->skel_term_qh->link = UHCI_PTR_TERM;
- uhci->skel_term_qh->element = cpu_to_le32(uhci->term_td->dma_handle);
+ (0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
+ uhci->term_td->link = UHCI_PTR_TERM;
+ uhci->skel_async_qh->element = uhci->skel_term_qh->element =
+ LINK_TO_TD(uhci->term_td);
/*
* Fill the frame list: make all entries point to the proper
int rc = 0;
spin_lock_irq(&uhci->lock);
- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
- dev_warn(&hcd->self.root_hub->dev, "HC isn't running!\n");
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
rc = -ESHUTDOWN;
- } else if (!uhci->dead)
+ else if (!uhci->dead)
wakeup_rh(uhci);
spin_unlock_irq(&uhci->lock);
return rc;
}
-static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message)
+static int uhci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int rc = 0;
- dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
+ dev_dbg(uhci_dev(uhci), "%s\n", __func__);
spin_lock_irq(&uhci->lock);
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
return rc;
}
-static int uhci_resume(struct usb_hcd *hcd)
+static int uhci_pci_resume(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
+ dev_dbg(uhci_dev(uhci), "%s\n", __func__);
/* Since we aren't in D3 any more, it's safe to set this flag
* even if the controller was dead.
.reset = uhci_init,
.start = uhci_start,
#ifdef CONFIG_PM
- .suspend = uhci_suspend,
- .resume = uhci_resume,
+ .pci_suspend = uhci_pci_suspend,
+ .pci_resume = uhci_pci_resume,
.bus_suspend = uhci_rh_suspend,
.bus_resume = uhci_rh_resume,
#endif
}
uhci_up_cachep = kmem_cache_create("uhci_urb_priv",
- sizeof(struct urb_priv), 0, 0, NULL, NULL);
+ sizeof(struct urb_priv), 0, 0, NULL);
if (!uhci_up_cachep)
goto up_failed;