#define APPLE_VENDOR_ID 0x05AC
#define ATP_DEVICE(prod) \
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
USB_DEVICE_ID_MATCH_INT_CLASS | \
USB_DEVICE_ID_MATCH_INT_PROTOCOL, \
.idVendor = APPLE_VENDOR_ID, \
* We try to keep the touchpad aspect ratio while still doing only simple
* arithmetics.
* The factors below give coordinates like:
- * 0 <= x < 960 on 12" and 15" Powerbooks
- * 0 <= x < 1600 on 17" Powerbooks
- * 0 <= y < 646
+ * 0 <= x < 960 on 12" and 15" Powerbooks
+ * 0 <= x < 1600 on 17" Powerbooks
+ * 0 <= y < 646
*/
#define ATP_XFACT 64
#define ATP_YFACT 43
/* Structure to hold all of our device specific stuff */
struct atp {
+ char phys[64];
struct usb_device * udev; /* usb device */
struct urb * urb; /* usb request block */
signed char * data; /* transferred data */
int open; /* non-zero if opened */
- struct input_dev input; /* input dev */
+ struct input_dev *input; /* input dev */
int valid; /* are the sensors valid ? */
int x_old; /* last reported x/y, */
int y_old; /* used for smoothing */
int i; \
printk("appletouch: %s %lld", msg, (long long)jiffies); \
for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) \
- printk(" %02x", tab[i]); \
- printk("\n"); \
+ printk(" %02x", tab[i]); \
+ printk("\n"); \
}
-#define dprintk(format, a...) \
+#define dprintk(format, a...) \
do { \
if (debug) printk(format, ##a); \
} while (0)
for (i = 16; i < ATP_XSENSORS; i++)
if (dev->xy_cur[i]) {
printk("appletouch: 17\" model detected.\n");
- input_set_abs_params(&dev->input, ABS_X, 0,
- (ATP_XSENSORS - 1) *
+ input_set_abs_params(dev->input, ABS_X, 0,
+ (ATP_XSENSORS - 1) *
ATP_XFACT - 1,
ATP_FUZZ, 0);
break;
"Xz: %3d Yz: %3d\n",
x, y, x_z, y_z);
- input_report_key(&dev->input, BTN_TOUCH, 1);
- input_report_abs(&dev->input, ABS_X, x);
- input_report_abs(&dev->input, ABS_Y, y);
- input_report_abs(&dev->input, ABS_PRESSURE,
+ input_report_key(dev->input, BTN_TOUCH, 1);
+ input_report_abs(dev->input, ABS_X, x);
+ input_report_abs(dev->input, ABS_Y, y);
+ input_report_abs(dev->input, ABS_PRESSURE,
min(ATP_PRESSURE, x_z + y_z));
- atp_report_fingers(&dev->input, max(x_f, y_f));
+ atp_report_fingers(dev->input, max(x_f, y_f));
}
dev->x_old = x;
dev->y_old = y;
else if (!x && !y) {
dev->x_old = dev->y_old = -1;
- input_report_key(&dev->input, BTN_TOUCH, 0);
- input_report_abs(&dev->input, ABS_PRESSURE, 0);
- atp_report_fingers(&dev->input, 0);
+ input_report_key(dev->input, BTN_TOUCH, 0);
+ input_report_abs(dev->input, ABS_PRESSURE, 0);
+ atp_report_fingers(dev->input, 0);
/* reset the accumulator on release */
memset(dev->xy_acc, 0, sizeof(dev->xy_acc));
}
- input_report_key(&dev->input, BTN_LEFT, !!dev->data[80]);
+ input_report_key(dev->input, BTN_LEFT, !!dev->data[80]);
- input_sync(&dev->input);
+ input_sync(dev->input);
exit:
retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id)
{
- struct atp *dev = NULL;
+ struct atp *dev;
+ struct input_dev *input_dev;
+ struct usb_device *udev = interface_to_usbdev(iface);
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
int int_in_endpointAddr = 0;
int i, retval = -ENOMEM;
- /* allocate memory for our device state and initialize it */
- dev = kmalloc(sizeof(struct atp), GFP_KERNEL);
- if (dev == NULL) {
- err("Out of memory");
- goto err_kmalloc;
- }
- memset(dev, 0, sizeof(struct atp));
-
- dev->udev = interface_to_usbdev(iface);
/* set up the endpoint information */
/* use only the first interrupt-in endpoint */
}
}
if (!int_in_endpointAddr) {
- retval = -EIO;
err("Could not find int-in endpoint");
- goto err_endpoint;
+ return -EIO;
}
- /* save our data pointer in this interface device */
- usb_set_intfdata(iface, dev);
+ /* allocate memory for our device state and initialize it */
+ dev = kzalloc(sizeof(struct atp), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!dev || !input_dev) {
+ err("Out of memory");
+ goto err_free_devs;
+ }
+
+ dev->udev = udev;
+ dev->input = input_dev;
dev->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->urb) {
retval = -ENOMEM;
- goto err_usballoc;
+ goto err_free_devs;
}
+
dev->data = usb_buffer_alloc(dev->udev, ATP_DATASIZE, GFP_KERNEL,
&dev->urb->transfer_dma);
if (!dev->data) {
retval = -ENOMEM;
- goto err_usbbufalloc;
+ goto err_free_urb;
}
- usb_fill_int_urb(dev->urb, dev->udev,
- usb_rcvintpipe(dev->udev, int_in_endpointAddr),
+
+ usb_fill_int_urb(dev->urb, udev,
+ usb_rcvintpipe(udev, int_in_endpointAddr),
dev->data, ATP_DATASIZE, atp_complete, dev, 1);
- init_input_dev(&dev->input);
- dev->input.name = "appletouch";
- dev->input.dev = &iface->dev;
- dev->input.private = dev;
- dev->input.open = atp_open;
- dev->input.close = atp_close;
+ usb_make_path(udev, dev->phys, sizeof(dev->phys));
+ strlcat(dev->phys, "/input0", sizeof(dev->phys));
+
+ input_dev->name = "appletouch";
+ input_dev->phys = dev->phys;
+ usb_to_input_id(dev->udev, &input_dev->id);
+ input_dev->cdev.dev = &iface->dev;
- usb_to_input_id(dev->udev, &dev->input.id);
+ input_dev->private = dev;
+ input_dev->open = atp_open;
+ input_dev->close = atp_close;
- set_bit(EV_ABS, dev->input.evbit);
+ set_bit(EV_ABS, input_dev->evbit);
/*
* 12" and 15" Powerbooks only have 16 x sensors,
* 17" models are detected later.
*/
- input_set_abs_params(&dev->input, ABS_X, 0,
+ input_set_abs_params(input_dev, ABS_X, 0,
(16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0);
- input_set_abs_params(&dev->input, ABS_Y, 0,
+ input_set_abs_params(input_dev, ABS_Y, 0,
(ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0);
- input_set_abs_params(&dev->input, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0);
- set_bit(EV_KEY, dev->input.evbit);
- set_bit(BTN_TOUCH, dev->input.keybit);
- set_bit(BTN_TOOL_FINGER, dev->input.keybit);
- set_bit(BTN_TOOL_DOUBLETAP, dev->input.keybit);
- set_bit(BTN_TOOL_TRIPLETAP, dev->input.keybit);
- set_bit(BTN_LEFT, dev->input.keybit);
+ set_bit(EV_KEY, input_dev->evbit);
+ set_bit(BTN_TOUCH, input_dev->keybit);
+ set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+ set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+ set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+ set_bit(BTN_LEFT, input_dev->keybit);
- input_register_device(&dev->input);
+ input_register_device(dev->input);
- printk(KERN_INFO "input: appletouch connected\n");
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(iface, dev);
return 0;
-err_usbbufalloc:
+ err_free_urb:
usb_free_urb(dev->urb);
-err_usballoc:
+ err_free_devs:
usb_set_intfdata(iface, NULL);
-err_endpoint:
kfree(dev);
-err_kmalloc:
+ input_free_device(input_dev);
return retval;
}
usb_set_intfdata(iface, NULL);
if (dev) {
usb_kill_urb(dev->urb);
- input_unregister_device(&dev->input);
+ input_unregister_device(dev->input);
usb_free_urb(dev->urb);
usb_buffer_free(dev->udev, ATP_DATASIZE,
dev->data, dev->urb->transfer_dma);
}
static struct usb_driver atp_driver = {
- .owner = THIS_MODULE,
.name = "appletouch",
.probe = atp_probe,
.disconnect = atp_disconnect,
projects / linux-2.6-omap-h63xx.git / blobdiff