#define XPAD_PKT_LEN 32
-static struct xpad_device {
+static const struct xpad_device {
u16 idVendor;
u16 idProduct;
char *name;
{ 0x0000, 0x0000, "X-Box pad" }
};
-static signed short xpad_btn[] = {
+static const signed short xpad_btn[] = {
BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, /* "analog" buttons */
BTN_START, BTN_BACK, BTN_THUMBL, BTN_THUMBR, /* start/back/sticks */
-1 /* terminating entry */
};
-static signed short xpad_abs[] = {
+static const signed short xpad_abs[] = {
ABS_X, ABS_Y, /* left stick */
ABS_RX, ABS_RY, /* right stick */
ABS_Z, ABS_RZ, /* triggers left/right */
MODULE_DEVICE_TABLE (usb, xpad_table);
struct usb_xpad {
- struct input_dev dev; /* input device interface */
+ struct input_dev *dev; /* input device interface */
struct usb_device *udev; /* usb device */
struct urb *irq_in; /* urb for interrupt in report */
static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data, struct pt_regs *regs)
{
- struct input_dev *dev = &xpad->dev;
+ struct input_dev *dev = xpad->dev;
input_regs(dev, regs);
static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev (intf);
- struct usb_xpad *xpad = NULL;
+ struct usb_xpad *xpad;
+ struct input_dev *input_dev;
struct usb_endpoint_descriptor *ep_irq_in;
- char path[64];
int i;
for (i = 0; xpad_device[i].idVendor; i++) {
break;
}
- if ((xpad = kmalloc (sizeof(struct usb_xpad), GFP_KERNEL)) == NULL) {
- err("cannot allocate memory for new pad");
- return -ENOMEM;
- }
- memset(xpad, 0, sizeof(struct usb_xpad));
+ xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!xpad || !input_dev)
+ goto fail1;
xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN,
SLAB_ATOMIC, &xpad->idata_dma);
- if (!xpad->idata) {
- kfree(xpad);
- return -ENOMEM;
- }
+ if (!xpad->idata)
+ goto fail1;
xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
- if (!xpad->irq_in) {
- err("cannot allocate memory for new pad irq urb");
- usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
- kfree(xpad);
- return -ENOMEM;
- }
-
- ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
-
- usb_fill_int_urb(xpad->irq_in, udev,
- usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
- xpad->idata, XPAD_PKT_LEN, xpad_irq_in,
- xpad, ep_irq_in->bInterval);
- xpad->irq_in->transfer_dma = xpad->idata_dma;
- xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ if (!xpad->irq_in)
+ goto fail2;
xpad->udev = udev;
+ xpad->dev = input_dev;
+ usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
+ strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
- usb_to_input_id(udev, &xpad->dev.id);
- xpad->dev.dev = &intf->dev;
- xpad->dev.private = xpad;
- xpad->dev.name = xpad_device[i].name;
- xpad->dev.phys = xpad->phys;
- xpad->dev.open = xpad_open;
- xpad->dev.close = xpad_close;
-
- usb_make_path(udev, path, 64);
- snprintf(xpad->phys, 64, "%s/input0", path);
+ input_dev->name = xpad_device[i].name;
+ input_dev->phys = xpad->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = xpad;
+ input_dev->open = xpad_open;
+ input_dev->close = xpad_close;
- xpad->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (i = 0; xpad_btn[i] >= 0; i++)
- set_bit(xpad_btn[i], xpad->dev.keybit);
+ set_bit(xpad_btn[i], input_dev->keybit);
for (i = 0; xpad_abs[i] >= 0; i++) {
signed short t = xpad_abs[i];
- set_bit(t, xpad->dev.absbit);
+ set_bit(t, input_dev->absbit);
switch (t) {
case ABS_X:
case ABS_Y:
case ABS_RX:
case ABS_RY: /* the two sticks */
- xpad->dev.absmax[t] = 32767;
- xpad->dev.absmin[t] = -32768;
- xpad->dev.absflat[t] = 128;
- xpad->dev.absfuzz[t] = 16;
+ input_set_abs_params(input_dev, t, -32768, 32767, 16, 128);
break;
case ABS_Z:
case ABS_RZ: /* the triggers */
- xpad->dev.absmax[t] = 255;
- xpad->dev.absmin[t] = 0;
+ input_set_abs_params(input_dev, t, 0, 255, 0, 0);
break;
case ABS_HAT0X:
case ABS_HAT0Y: /* the d-pad */
- xpad->dev.absmax[t] = 1;
- xpad->dev.absmin[t] = -1;
+ input_set_abs_params(input_dev, t, -1, 1, 0, 0);
break;
}
}
- input_register_device(&xpad->dev);
+ ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
+ usb_fill_int_urb(xpad->irq_in, udev,
+ usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
+ xpad->idata, XPAD_PKT_LEN, xpad_irq_in,
+ xpad, ep_irq_in->bInterval);
+ xpad->irq_in->transfer_dma = xpad->idata_dma;
+ xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- printk(KERN_INFO "input: %s on %s", xpad->dev.name, path);
+ input_register_device(xpad->dev);
usb_set_intfdata(intf, xpad);
return 0;
+
+fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
+fail1: input_free_device(input_dev);
+ kfree(xpad);
+ return -ENOMEM;
+
}
static void xpad_disconnect(struct usb_interface *intf)
usb_set_intfdata(intf, NULL);
if (xpad) {
usb_kill_urb(xpad->irq_in);
- input_unregister_device(&xpad->dev);
+ input_unregister_device(xpad->dev);
usb_free_urb(xpad->irq_in);
usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
kfree(xpad);
}
static struct usb_driver xpad_driver = {
- .owner = THIS_MODULE,
.name = "xpad",
.probe = xpad_probe,
.disconnect = xpad_disconnect,