* The device works as an standard CDC device, it has 2 interfaces, the first
* one is for firmware access and the second is the serial one.
* The protocol is very simply, there are two posibilities reading or writing.
- * When writting the first urb must have a Header that starts with 0x20 0x29 the
+ * When writing the first urb must have a Header that starts with 0x20 0x29 the
* next two bytes must say how much data will be sended.
* When reading the process is almost equal except that the header starts with
* 0x00 0x20.
* buffer: The First and Second byte is used for a Header, the Third and Fourth
* tells the device the amount of information the package holds.
* Packages are 60 bytes long Header Stuff.
- * When writting to the device the first two bytes of the header are 0x20 0x29
+ * When writing to the device the first two bytes of the header are 0x20 0x29
* When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange
* situation, when too much data arrives to the device because it sends the data
* but with out the header. I will use a simply hack to override this situation,
static void aircable_write_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
+ int status = urb->status;
int result;
- dbg("%s - urb->status: %d", __FUNCTION__ , urb->status);
+ dbg("%s - urb status: %d", __FUNCTION__ , status);
/* This has been taken from cypress_m8.c cypress_write_int_callback */
- switch (urb->status) {
+ switch (status) {
case 0:
/* success */
break;
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, urb->status);
+ __FUNCTION__, status);
port->write_urb_busy = 0;
return;
default:
/* error in the urb, so we have to resubmit it */
dbg("%s - Overflow in write", __FUNCTION__);
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, urb->status);
+ __FUNCTION__, status);
port->write_urb->transfer_buffer_length = 1;
port->write_urb->dev = port->serial->dev;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
unsigned long no_packages, remaining, package_length, i;
int result, shift = 0;
unsigned char *temp;
+ int status = urb->status;
dbg("%s - port %d", __FUNCTION__, port->number);
- if (urb->status) {
- dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
+ if (status) {
+ dbg("%s - urb status = %d", __FUNCTION__, status);
if (!port->open_count) {
dbg("%s - port is closed, exiting.", __FUNCTION__);
return;
}
- if (urb->status == -EPROTO) {
+ if (status == -EPROTO) {
dbg("%s - caught -EPROTO, resubmitting the urb",
__FUNCTION__);
usb_fill_bulk_urb(port->read_urb, port->serial->dev,