Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6

[linux-2.6-omap-h63xx.git] / drivers / usb / serial / cp2101.c

diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 7ebaffd6ed8643ab43edf52aeb4201e5c6324873..33f6ee50b8d34b5c0ca5fc83d368d8325d11e235 100644 (file)
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -58,17 +58,22 @@ static struct usb_device_id id_table [] = {
        { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
        { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
        { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
+       { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
        { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
        { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
        { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
+       { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
        { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
        { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+       { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
+       { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
        { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
        { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
        { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
        { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
        { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
        { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+       { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
        { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
        { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
        { } /* Terminating Entry */
@@ -89,6 +94,7 @@ static struct usb_serial_driver cp2101_device = {
                .owner =        THIS_MODULE,
                .name =         "cp2101",
        },
+       .usb_driver             = &cp2101_driver,
        .id_table               = id_table,
        .num_interrupt_in       = 0,
        .num_bulk_in            = 0,
@@ -169,13 +175,13 @@ static int cp2101_get_config(struct usb_serial_port* port, u8 request,
                unsigned int *data, int size)
 {
        struct usb_serial *serial = port->serial;
-       u32 *buf;
+       __le32 *buf;
        int result, i, length;
 
        /* Number of integers required to contain the array */
        length = (((size - 1) | 3) + 1)/4;
 
-       buf = kcalloc(length, sizeof(u32), GFP_KERNEL);
+       buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
        if (!buf) {
                dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__);
                return -ENOMEM;
@@ -215,13 +221,13 @@ static int cp2101_set_config(struct usb_serial_port* port, u8 request,
                unsigned int *data, int size)
 {
        struct usb_serial *serial = port->serial;
-       u32 *buf;
+       __le32 *buf;
        int result, i, length;
 
        /* Number of integers required to contain the array */
        length = (((size - 1) | 3) + 1)/4;
 
-       buf = kmalloc(length * sizeof(u32), GFP_KERNEL);
+       buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
        if (!buf) {
                dev_err(&port->dev, "%s - out of memory.\n",
                                __FUNCTION__);
@@ -350,7 +356,7 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 
        dbg("%s - port %d", __FUNCTION__, port->number);
 
-       if ((!port->tty) || (!port->tty->termios)) {
+       if (!port->tty || !port->tty->termios) {
                dbg("%s - no tty structures", __FUNCTION__);
                return;
        }
@@ -520,50 +526,35 @@ static void cp2101_set_termios (struct usb_serial_port *port,
                return;
        }
        cflag = port->tty->termios->c_cflag;
-
-       /* Check that they really want us to change something */
-       if (old_termios) {
-               if ((cflag == old_termios->c_cflag) &&
-                               (RELEVANT_IFLAG(port->tty->termios->c_iflag)
-                               == RELEVANT_IFLAG(old_termios->c_iflag))) {
-                       dbg("%s - nothing to change...", __FUNCTION__);
-                       return;
-               }
-
-               old_cflag = old_termios->c_cflag;
-       }
+       old_cflag = old_termios->c_cflag;
+       baud = tty_get_baud_rate(port->tty);
 
        /* If the baud rate is to be updated*/
-       if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
-               switch (cflag & CBAUD) {
-                       /*
-                        * The baud rates which are commented out below
-                        * appear to be supported by the device
-                        * but are non-standard
-                        */
-                       case B0:        baud = 0;       break;
-                       case B600:      baud = 600;     break;
-                       case B1200:     baud = 1200;    break;
-                       case B1800:     baud = 1800;    break;
-                       case B2400:     baud = 2400;    break;
-                       case B4800:     baud = 4800;    break;
-                       /*case B7200:   baud = 7200;    break;*/
-                       case B9600:     baud = 9600;    break;
-                       /*ase B14400:   baud = 14400;   break;*/
-                       case B19200:    baud = 19200;   break;
-                       /*case B28800:  baud = 28800;   break;*/
-                       case B38400:    baud = 38400;   break;
-                       /*case B55854:  baud = 55054;   break;*/
-                       case B57600:    baud = 57600;   break;
-                       case B115200:   baud = 115200;  break;
-                       /*case B127117: baud = 127117;  break;*/
-                       case B230400:   baud = 230400;  break;
-                       case B460800:   baud = 460800;  break;
-                       case B921600:   baud = 921600;  break;
-                       /*case B3686400:        baud = 3686400; break;*/
+       if (baud != tty_termios_baud_rate(old_termios)) {
+               switch (baud) {
+                       case 0:
+                       case 600:
+                       case 1200:
+                       case 1800:
+                       case 2400:
+                       case 4800:
+                       case 7200:
+                       case 9600:
+                       case 14400:
+                       case 19200:
+                       case 28800:
+                       case 38400:
+                       case 55854:
+                       case 57600:
+                       case 115200:
+                       case 127117:
+                       case 230400:
+                       case 460800:
+                       case 921600:
+                       case 3686400:
+                               break;
                        default:
-                               dev_err(&port->dev, "cp2101 driver does not "
-                                       "support the baudrate requested\n");
+                               baud = 9600;
                                break;
                }