#define DRIVER_DESC "USB FTDI Serial Converters Driver"
static int debug;
+static __u16 vendor = FTDI_VID;
+static __u16 product;
/* struct ftdi_sio_quirk is used by devices requiring special attention. */
struct ftdi_sio_quirk {
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
+ /*
+ * These will probably use user-space drivers. Uncomment them if
+ * you need them or use the user-specified vendor/product module
+ * parameters (see ftdi_sio.h for the numbers). Make a fuss if
+ * you think the driver should recognize any of them by default.
+ */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, */
{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
{ USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
+ { USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
- { } /* Terminating entry */
+ { }, /* Optional parameter entry */
+ { } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, id_table_combined);
unsigned interfaces;
/* Assume it is not the original SIO device for now. */
- priv->baud_base = 48000000 / 16;
+ priv->baud_base = 48000000 / 2;
priv->write_offset = 0;
version = le16_to_cpu(udev->descriptor.bcdDevice);
} else {
/* set the baudrate determined before */
if (change_speed(port)) {
- err("%s urb failed to set baurdrate", __FUNCTION__);
+ err("%s urb failed to set baudrate", __FUNCTION__);
+ }
+ /* Ensure RTS and DTR are raised when baudrate changed from 0 */
+ if ((old_termios->c_cflag & CBAUD) == B0) {
+ set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
- /* Ensure RTS and DTR are raised */
- set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
/* Set flow control */
int retval;
dbg("%s", __FUNCTION__);
+ if (vendor > 0 && product > 0) {
+ /* Add user specified VID/PID to reserved element of table. */
+ int i;
+ for (i = 0; id_table_combined[i].idVendor; i++)
+ ;
+ id_table_combined[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+ id_table_combined[i].idVendor = vendor;
+ id_table_combined[i].idProduct = product;
+ }
retval = usb_serial_register(&ftdi_sio_device);
if (retval)
goto failed_sio_register;
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
+module_param(vendor, ushort, 0);
+MODULE_PARM_DESC(vendor, "User specified vendor ID (default="
+ __MODULE_STRING(FTDI_VID)")");
+module_param(product, ushort, 0);
+MODULE_PARM_DESC(vendor, "User specified product ID");