usb-serial: Use ftdi_sio driver for RATOC REX-USB60F

[linux-2.6-omap-h63xx.git] / drivers / usb / serial / ftdi_sio.h

diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index b51cbb0eaa054491c8bcc2479788f28fa0a0afde..a72f2c81d664671e603caba83829c390a006b266 100644 (file)
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -40,6 +40,17 @@
 /* AlphaMicro Components AMC-232USB01 device */
 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
 
+/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
+/* the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
+#define FTDI_SCS_DEVICE_1_PID 0xD011    /* SCS Tracker / DSP TNC */
+#define FTDI_SCS_DEVICE_2_PID 0xD012
+#define FTDI_SCS_DEVICE_3_PID 0xD013
+#define FTDI_SCS_DEVICE_4_PID 0xD014
+#define FTDI_SCS_DEVICE_5_PID 0xD015
+#define FTDI_SCS_DEVICE_6_PID 0xD016
+#define FTDI_SCS_DEVICE_7_PID 0xD017
+
 /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
 #define FTDI_ACTZWAVE_PID      0xF2D0
 
@@ -98,6 +109,17 @@
 #define FTDI_MTXORB_5_PID      0xFA05  /* Matrix Orbital Product Id */
 #define FTDI_MTXORB_6_PID      0xFA06  /* Matrix Orbital Product Id */
 
+/* OOCDlink by Joern Kaipf <joernk@web.de>
+ * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
+#define FTDI_OOCDLINK_PID      0xbaf8  /* Amontec JTAGkey */
+
+/*
+ * The following are the values for the Matrix Orbital VK204-25-USB
+ * display, which use the FT232RL.
+ */
+#define MTXORB_VK_VID          0x1b3d
+#define MTXORB_VK_PID          0x0158
+
 /* Interbiometrics USB I/O Board */
 /* Developed for Interbiometrics by Rudolf Gugler */
 #define INTERBIOMETRICS_VID              0x1209
@@ -245,6 +267,7 @@
 #define FTDI_ELV_WS300PC_PID   0xE0F6  /* PC-Wetterstation (WS 300 PC) */
 #define FTDI_ELV_FHZ1300PC_PID 0xE0E8  /* FHZ 1300 PC */
 #define FTDI_ELV_WS500_PID     0xE0E9  /* PC-Wetterstation (WS 500) */
+#define FTDI_ELV_EM1010PC_PID  0xE0EF  /* Engery monitor EM 1010 PC */
 
 /*
  * Definitions for ID TECH (www.idt-net.com) devices
@@ -278,6 +301,7 @@
 #define FTDI_ATIK_ATK16C_PID   0xDF32  /* ATIK ATK-16C Colour Camera */
 #define FTDI_ATIK_ATK16HR_PID  0xDF31  /* ATIK ATK-16HR Grayscale Camera */
 #define FTDI_ATIK_ATK16HRC_PID 0xDF33  /* ATIK ATK-16HRC Colour Camera */
+#define FTDI_ATIK_ATK16IC_PID   0xDF35  /* ATIK ATK-16IC Grayscale Camera */
 
 /*
  * Protego product ids
@@ -534,6 +558,8 @@
 #define OLIMEX_VID                     0x15BA
 #define OLIMEX_ARM_USB_OCD_PID         0x0003
 
+/* www.elsterelectricity.com Elster Unicom III Optical Probe */
+#define FTDI_ELSTER_UNICOM_PID         0xE700 /* Product Id */
 
 /*
  * The Mobility Lab (TML)
@@ -542,6 +568,9 @@
 #define TML_VID                        0x1B91  /* Vendor ID */
 #define TML_USB_SERIAL_PID     0x0064  /* USB - Serial Converter */
 
+/* Propox devices */
+#define FTDI_PROPOX_JTAGCABLEII_PID    0xD738
+
 /* Commands */
 #define FTDI_SIO_RESET                 0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL    1 /* Set the modem control register */
@@ -555,6 +584,19 @@
 #define FTDI_SIO_GET_LATENCY_TIMER     10 /* Get the latency timer */
 
 
+/*
+ * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
+ * Submitted by Harald Welte <laforge@openmoko.org>
+ */
+#define        FIC_VID                 0x1457
+#define        FIC_NEO1973_DEBUG_PID   0x5118
+
+/*
+ * RATOC REX-USB60F
+ */
+#define RATOC_VENDOR_ID                0x0584
+#define RATOC_PRODUCT_ID_USB60F        0xb020
+
 /*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ