},
.id_table = generic_device_ids,
.usb_driver = &generic_driver,
- .num_interrupt_in = NUM_DONT_CARE,
- .num_bulk_in = NUM_DONT_CARE,
- .num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
.shutdown = usb_serial_generic_shutdown,
.throttle = usb_serial_generic_throttle,
int result = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* force low_latency on so that our tty_push actually forces the data through,
otherwise it is scheduled, and with high data rates (like with OHCI) data
port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
- dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
}
return result;
{
struct usb_serial *serial = port->serial;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (serial->dev) {
/* shutdown any bulk reads that might be going on */
struct usb_serial_port *port;
int i, c = 0, r;
+#ifdef CONFIG_PM
+ /*
+ * If this is an autoresume, don't submit URBs.
+ * They will be submitted in the open function instead.
+ */
+ if (serial->dev->auto_pm)
+ return 0;
+#endif
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
if (port->open_count && port->read_urb) {
void usb_serial_generic_close (struct usb_serial_port *port, struct file * filp)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
generic_cleanup (port);
}
int result;
unsigned char *data;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (count == 0) {
- dbg("%s - write request of 0 bytes", __FUNCTION__);
+ dbg("%s - write request of 0 bytes", __func__);
return (0);
}
/* only do something if we have a bulk out endpoint */
if (serial->num_bulk_out) {
- spin_lock_bh(&port->lock);
+ unsigned long flags;
+ spin_lock_irqsave(&port->lock, flags);
if (port->write_urb_busy) {
- spin_unlock_bh(&port->lock);
- dbg("%s - already writing", __FUNCTION__);
+ spin_unlock_irqrestore(&port->lock, flags);
+ dbg("%s - already writing", __func__);
return 0;
}
port->write_urb_busy = 1;
- spin_unlock_bh(&port->lock);
+ spin_unlock_irqrestore(&port->lock, flags);
count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
memcpy (port->write_urb->transfer_buffer, buf, count);
data = port->write_urb->transfer_buffer;
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, data);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, data);
/* set up our urb */
usb_fill_bulk_urb (port->write_urb, serial->dev,
port->write_urb_busy = 1;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result);
/* don't have to grab the lock here, as we will retry if != 0 */
port->write_urb_busy = 0;
} else
struct usb_serial *serial = port->serial;
int room = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
+ /* FIXME: Locking */
if (serial->num_bulk_out) {
if (!(port->write_urb_busy))
room = port->bulk_out_size;
}
- dbg("%s - returns %d", __FUNCTION__, room);
- return (room);
+ dbg("%s - returns %d", __func__, room);
+ return room;
}
int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port)
struct usb_serial *serial = port->serial;
int chars = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
+ /* FIXME: Locking */
if (serial->num_bulk_out) {
if (port->write_urb_busy)
chars = port->write_urb->transfer_buffer_length;
}
- dbg("%s - returns %d", __FUNCTION__, chars);
+ dbg("%s - returns %d", __func__, chars);
return (chars);
}
usb_serial_generic_read_bulk_callback), port);
result = usb_submit_urb(urb, mem_flags);
if (result)
- dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
}
/* Push data to tty layer and resubmit the bulk read URB */
room = tty_buffer_request_room(tty, urb->actual_length);
if (room) {
tty_insert_flip_string(tty, urb->transfer_buffer, room);
- tty_flip_buffer_push(tty); /* is this allowed from an URB callback ? */
+ tty_flip_buffer_push(tty);
}
}
void usb_serial_generic_read_bulk_callback (struct urb *urb)
{
- struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+ struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
+ int status = urb->status;
+ unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
- if (unlikely(urb->status != 0)) {
- dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
+ if (unlikely(status != 0)) {
+ dbg("%s - nonzero read bulk status received: %d",
+ __func__, status);
return;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
/* Throttle the device if requested by tty */
- spin_lock(&port->lock);
- if (!(port->throttled = port->throttle_req))
- /* Handle data and continue reading from device */
+ spin_lock_irqsave(&port->lock, flags);
+ if (!(port->throttled = port->throttle_req)) {
+ spin_unlock_irqrestore(&port->lock, flags);
flush_and_resubmit_read_urb(port);
- spin_unlock(&port->lock);
+ } else {
+ spin_unlock_irqrestore(&port->lock, flags);
+ }
}
EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
void usb_serial_generic_write_bulk_callback (struct urb *urb)
{
- struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+ struct usb_serial_port *port = urb->context;
+ int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
port->write_urb_busy = 0;
- if (urb->status) {
- dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
+ if (status) {
+ dbg("%s - nonzero write bulk status received: %d",
+ __func__, status);
return;
}
-
usb_serial_port_softint(port);
}
EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback);
{
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* Set the throttle request flag. It will be picked up
* by usb_serial_generic_read_bulk_callback(). */
int was_throttled;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* Clear the throttle flags */
spin_lock_irqsave(&port->lock, flags);
{
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* stop reads and writes on all ports */
for (i=0; i < serial->num_ports; ++i) {