#include <linux/serial.h>
#include <linux/ioctl.h>
#include <asm/uaccess.h>
-#include <asm/semaphore.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
return status;
if (status != size) {
dbg ("%s - wanted to write %d, but only wrote %d",
- __FUNCTION__, size, status);
+ __func__, size, status);
return -ECOMM;
}
return 0;
return status;
if (status != size) {
dbg ("%s - wanted to write %d, but only wrote %d",
- __FUNCTION__, size, status);
+ __func__, size, status);
return -ECOMM;
}
return 0;
{
int port_number = port->number - port->serial->minor;
- dbg ("%s - port %d, mask %x", __FUNCTION__, port_number, mask);
+ dbg ("%s - port %d, mask %x", __func__, port_number, mask);
return TIWriteCommandSync (port->serial->dev,
UMPC_PURGE_PORT,
__u8 read_length;
__be16 be_start_address;
- dbg ("%s - @ %x for %d", __FUNCTION__, start_address, length);
+ dbg ("%s - @ %x for %d", __func__, start_address, length);
/* Read in blocks of 64 bytes
* (TI firmware can't handle more than 64 byte reads)
read_length = (__u8)length;
if (read_length > 1) {
- dbg ("%s - @ %x for %d", __FUNCTION__,
+ dbg ("%s - @ %x for %d", __func__,
start_address, read_length);
}
be_start_address = cpu_to_be16 (start_address);
read_length); // TransferBufferLength
if (status) {
- dbg ("%s - ERROR %x", __FUNCTION__, status);
+ dbg ("%s - ERROR %x", __func__, status);
return status;
}
if (read_length > 1) {
- usb_serial_debug_data(debug, &dev->dev, __FUNCTION__,
+ usb_serial_debug_data(debug, &dev->dev, __func__,
read_length, buffer);
}
&buffer[i], // TransferBuffer
0x01); // TransferBufferLength
if (status) {
- dbg ("%s - ERROR %x", __FUNCTION__, status);
+ dbg ("%s - ERROR %x", __func__, status);
return status;
}
}
- dbg ("%s - start_address = %x, length = %d", __FUNCTION__, start_address, length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, length, buffer);
+ dbg ("%s - start_address = %x, length = %d", __func__, start_address, length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, length, buffer);
serial->TiReadI2C = 1;
return status;
}
- dbg ("%s - start_sddr = %x, length = %d", __FUNCTION__, start_address, length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, length, buffer);
+ dbg ("%s - start_sddr = %x, length = %d", __func__, start_address, length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, length, buffer);
return status;
}
if (write_length > length)
write_length = length;
- dbg ("%s - BytesInFirstPage Addr = %x, length = %d", __FUNCTION__, start_address, write_length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, write_length, buffer);
+ dbg ("%s - BytesInFirstPage Addr = %x, length = %d", __func__, start_address, write_length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, write_length, buffer);
/* Write first page */
be_start_address = cpu_to_be16 (start_address);
buffer, // TransferBuffer
write_length);
if (status) {
- dbg ("%s - ERROR %d", __FUNCTION__, status);
+ dbg ("%s - ERROR %d", __func__, status);
return status;
}
else
write_length = length;
- dbg ("%s - Page Write Addr = %x, length = %d", __FUNCTION__, start_address, write_length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, write_length, buffer);
+ dbg ("%s - Page Write Addr = %x, length = %d", __func__, start_address, write_length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, write_length, buffer);
/* Write next page */
be_start_address = cpu_to_be16 (start_address);
buffer, // TransferBuffer
write_length); // TransferBufferLength
if (status) {
- dev_err (&serial->serial->dev->dev, "%s - ERROR %d\n", __FUNCTION__, status);
+ dev_err (&serial->serial->dev->dev, "%s - ERROR %d\n", __func__, status);
return status;
}
oedb = kmalloc (sizeof (* oedb), GFP_KERNEL);
if (!oedb) {
- dev_err (&port->port->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (&port->port->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
if (status)
goto exit_is_tx_active;
- dbg ("%s - XByteCount 0x%X", __FUNCTION__, oedb->XByteCount);
+ dbg ("%s - XByteCount 0x%X", __func__, oedb->XByteCount);
/* and the LSR */
status = TIReadRam (port->port->serial->dev,
if (status)
goto exit_is_tx_active;
- dbg ("%s - LSR = 0x%X", __FUNCTION__, *lsr);
+ dbg ("%s - LSR = 0x%X", __func__, *lsr);
/* If either buffer has data or we are transmitting then return TRUE */
if ((oedb->XByteCount & 0x80 ) != 0 )
/* We return Not Active if we get any kind of error */
exit_is_tx_active:
- dbg ("%s - return %d", __FUNCTION__, bytes_left );
+ dbg ("%s - return %d", __func__, bytes_left );
kfree(lsr);
kfree(oedb);
/* (TIIsTxActive doesn't seem to wait for the last byte) */
if ((baud_rate=port->baud_rate) == 0)
baud_rate = 50;
- msleep(max(1,(10000+baud_rate-1)/baud_rate));
+ msleep(max(1, DIV_ROUND_UP(10000, baud_rate)));
}
static int TIChooseConfiguration (struct usb_device *dev)
// we want. However, we just support one config at this point,
// configuration # 1, which is Config Descriptor 0.
- dbg ("%s - Number of Interfaces = %d", __FUNCTION__, dev->config->desc.bNumInterfaces);
- dbg ("%s - MAX Power = %d", __FUNCTION__, dev->config->desc.bMaxPower*2);
+ dbg ("%s - Number of Interfaces = %d", __func__, dev->config->desc.bNumInterfaces);
+ dbg ("%s - MAX Power = %d", __func__, dev->config->desc.bMaxPower*2);
if (dev->config->desc.bNumInterfaces != 1) {
- dev_err (&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __FUNCTION__);
+ dev_err (&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __func__);
return -ENODEV;
}
cs = (__u8)(cs + buffer[i]);
}
if (cs != rom_desc->CheckSum) {
- dbg ("%s - Mismatch %x - %x", __FUNCTION__, rom_desc->CheckSum, cs);
+ dbg ("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs);
return -EINVAL;
}
return 0;
rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL);
if (!rom_desc) {
- dev_err (dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
buffer = kmalloc (TI_MAX_I2C_SIZE, GFP_KERNEL);
if (!buffer) {
- dev_err (dev, "%s - out of memory when allocating buffer\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory when allocating buffer\n", __func__);
kfree (rom_desc);
return -ENOMEM;
}
goto ExitTiValidateI2cImage;
if (*buffer != UMP5152 && *buffer != UMP3410) {
- dev_err (dev, "%s - invalid buffer signature\n", __FUNCTION__);
+ dev_err (dev, "%s - invalid buffer signature\n", __func__);
status = -ENODEV;
goto ExitTiValidateI2cImage;
}
if ((start_address + sizeof(struct ti_i2c_desc) + rom_desc->Size) > TI_MAX_I2C_SIZE) {
status = -ENODEV;
- dbg ("%s - structure too big, erroring out.", __FUNCTION__);
+ dbg ("%s - structure too big, erroring out.", __func__);
break;
}
- dbg ("%s Type = 0x%x", __FUNCTION__, rom_desc->Type);
+ dbg ("%s Type = 0x%x", __func__, rom_desc->Type);
// Skip type 2 record
ttype = rom_desc->Type & 0x0f;
rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL);
if (!rom_desc) {
- dev_err (&serial->serial->dev->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (&serial->serial->dev->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
start_address = TIGetDescriptorAddress (serial, I2C_DESC_TYPE_ION, rom_desc);
if (!start_address) {
- dbg ("%s - Edge Descriptor not found in I2C", __FUNCTION__);
+ dbg ("%s - Edge Descriptor not found in I2C", __func__);
status = -ENODEV;
goto exit;
}
status = ValidChecksum(rom_desc, buffer);
desc = (struct edge_ti_manuf_descriptor *)buffer;
- dbg ( "%s - IonConfig 0x%x", __FUNCTION__, desc->IonConfig );
- dbg ( "%s - Version %d", __FUNCTION__, desc->Version );
- dbg ( "%s - Cpu/Board 0x%x", __FUNCTION__, desc->CpuRev_BoardRev );
- dbg ( "%s - NumPorts %d", __FUNCTION__, desc->NumPorts );
- dbg ( "%s - NumVirtualPorts %d", __FUNCTION__, desc->NumVirtualPorts );
- dbg ( "%s - TotalPorts %d", __FUNCTION__, desc->TotalPorts );
+ dbg ( "%s - IonConfig 0x%x", __func__, desc->IonConfig );
+ dbg ( "%s - Version %d", __func__, desc->Version );
+ dbg ( "%s - Cpu/Board 0x%x", __func__, desc->CpuRev_BoardRev );
+ dbg ( "%s - NumPorts %d", __func__, desc->NumPorts );
+ dbg ( "%s - NumVirtualPorts %d", __func__, desc->NumVirtualPorts );
+ dbg ( "%s - TotalPorts %d", __func__, desc->TotalPorts );
exit:
kfree (rom_desc);
buffer = kmalloc (buffer_size, GFP_KERNEL);
if (!buffer) {
- dev_err (dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
&data, // TransferBuffer
0x01); // TransferBufferLength
if (status)
- dbg ("%s - read 2 status error = %d", __FUNCTION__, status);
+ dbg ("%s - read 2 status error = %d", __func__, status);
else
- dbg ("%s - read 2 data = 0x%x", __FUNCTION__, data);
+ dbg ("%s - read 2 data = 0x%x", __func__, data);
if ((!status) && (data == UMP5152 || data == UMP3410)) {
- dbg ("%s - ROM_TYPE_II", __FUNCTION__);
+ dbg ("%s - ROM_TYPE_II", __func__);
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
return 0;
}
&data, // TransferBuffer
0x01); // TransferBufferLength
if (status)
- dbg ("%s - read 3 status error = %d", __FUNCTION__, status);
+ dbg ("%s - read 3 status error = %d", __func__, status);
else
- dbg ("%s - read 2 data = 0x%x", __FUNCTION__, data);
+ dbg ("%s - read 2 data = 0x%x", __func__, data);
if ((!status) && (data == UMP5152 || data == UMP3410)) {
- dbg ("%s - ROM_TYPE_III", __FUNCTION__);
+ dbg ("%s - ROM_TYPE_III", __func__);
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III;
return 0;
}
- dbg ("%s - Unknown", __FUNCTION__);
+ dbg ("%s - Unknown", __func__);
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
return -ENODEV;
}
interface = &serial->serial->interface->cur_altsetting->desc;
if (!interface) {
- dev_err (dev, "%s - no interface set, error!\n", __FUNCTION__);
+ dev_err (dev, "%s - no interface set, error!\n", __func__);
return -ENODEV;
}
if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) {
struct ti_i2c_desc *rom_desc;
- dbg ("%s - <<<<<<<<<<<<<<<RUNNING IN DOWNLOAD MODE>>>>>>>>>>", __FUNCTION__);
+ dbg("%s - RUNNING IN DOWNLOAD MODE", __func__);
status = TiValidateI2cImage (serial);
if (status) {
- dbg ("%s - <<<<<<<<<<<<<<<DOWNLOAD MODE -- BAD I2C >>>>>>>>>>",
- __FUNCTION__);
+ dbg("%s - DOWNLOAD MODE -- BAD I2C", __func__);
return status;
}
*/
ti_manuf_desc = kmalloc (sizeof (*ti_manuf_desc), GFP_KERNEL);
if (!ti_manuf_desc) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
return -ENOMEM;
}
status = TIReadManufDescriptor (serial, (__u8 *)ti_manuf_desc);
// Check version number of ION descriptor
if (!ignore_cpu_rev && TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev) < 2) {
- dbg ( "%s - Wrong CPU Rev %d (Must be 2)", __FUNCTION__,
+ dbg ( "%s - Wrong CPU Rev %d (Must be 2)", __func__,
TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev));
kfree (ti_manuf_desc);
return -EINVAL;
rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL);
if (!rom_desc) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
kfree (ti_manuf_desc);
return -ENOMEM;
}
struct ti_i2c_firmware_rec *firmware_version;
__u8 record;
- dbg ("%s - Found Type FIRMWARE (Type 2) record", __FUNCTION__);
+ dbg ("%s - Found Type FIRMWARE (Type 2) record", __func__);
firmware_version = kmalloc (sizeof (*firmware_version), GFP_KERNEL);
if (!firmware_version) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
kfree (rom_desc);
kfree (ti_manuf_desc);
return -ENOMEM;
(OperationalCodeImageVersion.MinorVersion);
dbg ("%s - >>>Firmware Versions Device %d.%d Driver %d.%d",
- __FUNCTION__,
+ __func__,
firmware_version->Ver_Major,
firmware_version->Ver_Minor,
OperationalCodeImageVersion.MajorVersion,
// Check if we have an old version in the I2C and update if necessary
if (download_cur_ver != download_new_ver) {
dbg ("%s - Update I2C Download from %d.%d to %d.%d",
- __FUNCTION__,
+ __func__,
firmware_version->Ver_Major,
firmware_version->Ver_Minor,
OperationalCodeImageVersion.MajorVersion,
}
if (record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
- dev_err (dev, "%s - error resetting device\n", __FUNCTION__);
+ dev_err (dev, "%s - error resetting device\n", __func__);
kfree (firmware_version);
kfree (rom_desc);
kfree (ti_manuf_desc);
return -ENODEV;
}
- dbg ("%s - HARDWARE RESET", __FUNCTION__);
+ dbg ("%s - HARDWARE RESET", __func__);
// Reset UMP -- Back to BOOT MODE
status = TISendVendorRequestSync (serial->serial->dev,
NULL, // TransferBuffer
0); // TransferBufferLength
- dbg ( "%s - HARDWARE RESET return %d", __FUNCTION__, status);
+ dbg ( "%s - HARDWARE RESET return %d", __func__, status);
/* return an error on purpose. */
kfree (firmware_version);
header = kmalloc (HEADER_SIZE, GFP_KERNEL);
if (!header) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
kfree (rom_desc);
kfree (ti_manuf_desc);
return -ENOMEM;
vheader = kmalloc (HEADER_SIZE, GFP_KERNEL);
if (!vheader) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
kfree (header);
kfree (rom_desc);
kfree (ti_manuf_desc);
return -ENOMEM;
}
- dbg ("%s - Found Type BLANK FIRMWARE (Type F2) record", __FUNCTION__);
+ dbg ("%s - Found Type BLANK FIRMWARE (Type F2) record", __func__);
// In order to update the I2C firmware we must change the type 2 record to type 0xF2.
// This will force the UMP to come up in Boot Mode. Then while in boot mode, the driver
vheader);
if (status) {
- dbg ("%s - can't read header back", __FUNCTION__);
+ dbg ("%s - can't read header back", __func__);
kfree (vheader);
kfree (header);
kfree (rom_desc);
return status;
}
if (memcmp(vheader, header, HEADER_SIZE)) {
- dbg ("%s - write download record failed", __FUNCTION__);
+ dbg ("%s - write download record failed", __func__);
kfree (vheader);
kfree (header);
kfree (rom_desc);
kfree (vheader);
kfree (header);
- dbg ("%s - Start firmware update", __FUNCTION__);
+ dbg ("%s - Start firmware update", __func__);
// Tell firmware to copy download image into I2C
status = TISendVendorRequestSync (serial->serial->dev,
NULL, // TransferBuffer
0); // TransferBufferLength
- dbg ("%s - Update complete 0x%x", __FUNCTION__, status);
+ dbg ("%s - Update complete 0x%x", __func__, status);
if (status) {
- dev_err (dev, "%s - UMPC_COPY_DNLD_TO_I2C failed\n", __FUNCTION__);
+ dev_err (dev, "%s - UMPC_COPY_DNLD_TO_I2C failed\n", __func__);
kfree (rom_desc);
kfree (ti_manuf_desc);
return status;
/********************************************************************/
/* Boot Mode */
/********************************************************************/
- dbg ("%s - <<<<<<<<<<<<<<<RUNNING IN BOOT MODE>>>>>>>>>>>>>>>",
- __FUNCTION__);
+ dbg("%s - RUNNING IN BOOT MODE", __func__);
// Configure the TI device so we can use the BULK pipes for download
status = TIConfigureBootDevice (serial->serial->dev);
return status;
if (le16_to_cpu(serial->serial->dev->descriptor.idVendor) != USB_VENDOR_ID_ION) {
- dbg ("%s - VID = 0x%x", __FUNCTION__,
+ dbg ("%s - VID = 0x%x", __func__,
le16_to_cpu(serial->serial->dev->descriptor.idVendor));
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
goto StayInBootMode;
// Registry variable set?
if (TIStayInBootMode) {
- dbg ("%s - TIStayInBootMode", __FUNCTION__);
+ dbg ("%s - TIStayInBootMode", __func__);
goto StayInBootMode;
}
*/
ti_manuf_desc = kmalloc (sizeof (*ti_manuf_desc), GFP_KERNEL);
if (!ti_manuf_desc) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
return -ENOMEM;
}
status = TIReadManufDescriptor (serial, (__u8 *)ti_manuf_desc);
// Check for version 2
if (!ignore_cpu_rev && TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev) < 2) {
- dbg ("%s - Wrong CPU Rev %d (Must be 2)", __FUNCTION__,
+ dbg ("%s - Wrong CPU Rev %d (Must be 2)", __func__,
TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev));
kfree (ti_manuf_desc);
goto StayInBootMode;
buffer_size = (((1024 * 16) - 512) + sizeof(struct ti_i2c_image_header));
buffer = kmalloc (buffer_size, GFP_KERNEL);
if (!buffer) {
- dev_err (dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
header->CheckSum = cs;
// Download the operational code
- dbg ("%s - Downloading operational code image (TI UMP)", __FUNCTION__);
+ dbg ("%s - Downloading operational code image (TI UMP)", __func__);
status = TIDownloadCodeImage (serial, buffer, buffer_size);
kfree (buffer);
if (status) {
- dbg ("%s - Error downloading operational code image", __FUNCTION__);
+ dbg ("%s - Error downloading operational code image", __func__);
return status;
}
// Device will reboot
serial->product_info.TiMode = TI_MODE_TRANSITIONING;
- dbg ("%s - Download successful -- Device rebooting...", __FUNCTION__);
+ dbg ("%s - Download successful -- Device rebooting...", __func__);
/* return an error on purpose */
return -ENODEV;
StayInBootMode:
// Eprom is invalid or blank stay in boot mode
- dbg ("%s - <<<<<<<<<<<<<<<STAYING IN BOOT MODE>>>>>>>>>>>>", __FUNCTION__);
+ dbg("%s - STAYING IN BOOT MODE", __func__);
serial->product_info.TiMode = TI_MODE_BOOT;
return 0;
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
port->shadow_mcr |= MCR_DTR;
return TIWriteCommandSync (port->port->serial->dev,
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
port->shadow_mcr &= ~MCR_DTR;
return TIWriteCommandSync (port->port->serial->dev,
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
port->shadow_mcr |= MCR_RTS;
return TIWriteCommandSync (port->port->serial->dev,
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
port->shadow_mcr &= ~MCR_RTS;
return TIWriteCommandSync (port->port->serial->dev,
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
return TIWriteCommandSync (port->port->serial->dev,
UMPC_SET_CLR_LOOPBACK,
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
return TIWriteCommandSync (port->port->serial->dev,
UMPC_SET_CLR_LOOPBACK,
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
return TIWriteCommandSync (port->port->serial->dev,
UMPC_SET_CLR_BREAK,
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
return TIWriteCommandSync (port->port->serial->dev,
UMPC_SET_CLR_BREAK,
{
int status = 0;
- dbg ("%s - %x", __FUNCTION__, mcr);
+ dbg ("%s - %x", __func__, mcr);
if (mcr & MCR_DTR)
status = TISetDtr (port);
struct async_icount *icount;
struct tty_struct *tty;
- dbg ("%s - %02x", __FUNCTION__, msr);
+ dbg ("%s - %02x", __func__, msr);
if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
icount = &edge_port->icount;
struct async_icount *icount;
__u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
- dbg ("%s - %02x", __FUNCTION__, new_lsr);
+ dbg ("%s - %02x", __func__, new_lsr);
edge_port->shadow_lsr = lsr;
static void edge_interrupt_callback (struct urb *urb)
{
- struct edgeport_serial *edge_serial = (struct edgeport_serial *)urb->context;
+ struct edgeport_serial *edge_serial = urb->context;
struct usb_serial_port *port;
struct edgeport_port *edge_port;
unsigned char *data = urb->transfer_buffer;
__u8 msr;
int status = urb->status;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
switch (status) {
case 0:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dev_err(&urb->dev->dev, "%s - nonzero urb status received: "
- "%d\n", __FUNCTION__, status);
+ "%d\n", __func__, status);
goto exit;
}
if (!length) {
- dbg ("%s - no data in urb", __FUNCTION__);
+ dbg ("%s - no data in urb", __func__);
goto exit;
}
- usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __FUNCTION__, length, data);
+ usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, length, data);
if (length != 2) {
- dbg ("%s - expecting packet of size 2, got %d", __FUNCTION__, length);
+ dbg ("%s - expecting packet of size 2, got %d", __func__, length);
goto exit;
}
port_number = TIUMP_GET_PORT_FROM_CODE (data[0]);
function = TIUMP_GET_FUNC_FROM_CODE (data[0]);
dbg ("%s - port_number %d, function %d, info 0x%x",
- __FUNCTION__, port_number, function, data[1]);
+ __func__, port_number, function, data[1]);
port = edge_serial->serial->port[port_number];
edge_port = usb_get_serial_port_data(port);
if (!edge_port) {
- dbg ("%s - edge_port not found", __FUNCTION__);
+ dbg ("%s - edge_port not found", __func__);
return;
}
switch (function) {
if (lsr & UMP_UART_LSR_DATA_MASK) {
/* Save the LSR event for bulk read completion routine */
dbg ("%s - LSR Event Port %u LSR Status = %02x",
- __FUNCTION__, port_number, lsr);
+ __func__, port_number, lsr);
edge_port->lsr_event = 1;
edge_port->lsr_mask = lsr;
} else {
dbg ("%s - ===== Port %d LSR Status = %02x ======",
- __FUNCTION__, port_number, lsr);
+ __func__, port_number, lsr);
handle_new_lsr (edge_port, 0, lsr, 0);
}
break;
/* Copy MSR from UMP */
msr = data[1];
dbg ("%s - ===== Port %u MSR Status = %02x ======\n",
- __FUNCTION__, port_number, msr);
+ __func__, port_number, msr);
handle_new_msr (edge_port, msr);
break;
default:
dev_err (&urb->dev->dev, "%s - Unknown Interrupt code from UMP %x\n",
- __FUNCTION__, data[1]);
+ __func__, data[1]);
break;
}
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
dev_err (&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
}
static void edge_bulk_in_callback (struct urb *urb)
{
- struct edgeport_port *edge_port = (struct edgeport_port *)urb->context;
+ struct edgeport_port *edge_port = urb->context;
unsigned char *data = urb->transfer_buffer;
struct tty_struct *tty;
int retval = 0;
int port_number;
int status = urb->status;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
switch (status) {
case 0:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dev_err (&urb->dev->dev,"%s - nonzero read bulk status received: %d\n",
- __FUNCTION__, status);
+ __func__, status);
}
if (status == -EPIPE)
goto exit;
if (status) {
- dev_err(&urb->dev->dev,"%s - stopping read!\n", __FUNCTION__);
+ dev_err(&urb->dev->dev,"%s - stopping read!\n", __func__);
return;
}
if (edge_port->lsr_event) {
edge_port->lsr_event = 0;
dbg ("%s ===== Port %u LSR Status = %02x, Data = %02x ======",
- __FUNCTION__, port_number, edge_port->lsr_mask, *data);
+ __func__, port_number, edge_port->lsr_mask, *data);
handle_new_lsr (edge_port, 1, edge_port->lsr_mask, *data);
/* Adjust buffer length/pointer */
--urb->actual_length;
tty = edge_port->port->tty;
if (tty && urb->actual_length) {
- usb_serial_debug_data(debug, &edge_port->port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &edge_port->port->dev, __func__, urb->actual_length, data);
if (edge_port->close_pending) {
- dbg ("%s - close is pending, dropping data on the floor.", __FUNCTION__);
+ dbg ("%s - close is pending, dropping data on the floor.", __func__);
} else {
edge_tty_recv(&edge_port->port->dev, tty, data, urb->actual_length);
}
spin_unlock(&edge_port->ep_lock);
if (retval)
dev_err (&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
}
static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned char *data, int length)
cnt = tty_buffer_request_room(tty, length);
if (cnt < length) {
dev_err(dev, "%s - dropping data, %d bytes lost\n",
- __FUNCTION__, length - cnt);
+ __func__, length - cnt);
if(cnt == 0)
break;
}
static void edge_bulk_out_callback (struct urb *urb)
{
- struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+ struct usb_serial_port *port = urb->context;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int status = urb->status;
- dbg ("%s - port %d", __FUNCTION__, port->number);
+ dbg ("%s - port %d", __func__, port->number);
edge_port->ep_write_urb_in_use = 0;
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dev_err(&urb->dev->dev, "%s - nonzero write bulk status "
- "received: %d\n", __FUNCTION__, status);
+ "received: %d\n", __func__, status);
}
/* send any buffered data */
u16 open_settings;
u8 transaction_timeout;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return -ENODEV;
- if (port->tty)
- port->tty->low_latency = low_latency;
+ port->tty->low_latency = low_latency;
port_number = port->number - port->serial->minor;
switch (port_number) {
}
dbg ("%s - port_number = %d, uart_base = %04x, dma_address = %04x",
- __FUNCTION__, port_number, edge_port->uart_base, edge_port->dma_address);
+ __func__, port_number, edge_port->uart_base, edge_port->dma_address);
dev = port->serial->dev;
status = TIClearLoopBack (edge_port);
if (status) {
dev_err(&port->dev,"%s - cannot send clear loopback command, %d\n",
- __FUNCTION__, status);
+ __func__, status);
return status;
}
UMP_PIPE_TRANS_TIMEOUT_ENA |
(transaction_timeout << 2));
- dbg ("%s - Sending UMPC_OPEN_PORT", __FUNCTION__);
+ dbg ("%s - Sending UMPC_OPEN_PORT", __func__);
/* Tell TI to open and start the port */
status = TIWriteCommandSync (dev,
NULL,
0);
if (status) {
- dev_err(&port->dev,"%s - cannot send open command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev,"%s - cannot send open command, %d\n", __func__, status);
return status;
}
NULL,
0);
if (status) {
- dev_err(&port->dev,"%s - cannot send start DMA command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev,"%s - cannot send start DMA command, %d\n", __func__, status);
return status;
}
/* Clear TX and RX buffers in UMP */
status = TIPurgeDataSync (port, UMP_PORT_DIR_OUT | UMP_PORT_DIR_IN);
if (status) {
- dev_err(&port->dev,"%s - cannot send clear buffers command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev,"%s - cannot send clear buffers command, %d\n", __func__, status);
return status;
}
&edge_port->shadow_msr, // TransferBuffer
1); // TransferBufferLength
if (status) {
- dev_err(&port->dev,"%s - cannot send read MSR command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev,"%s - cannot send read MSR command, %d\n", __func__, status);
return status;
}
/* we are the first port to be opened, let's post the interrupt urb */
urb = edge_serial->serial->port[0]->interrupt_in_urb;
if (!urb) {
- dev_err (&port->dev, "%s - no interrupt urb present, exiting\n", __FUNCTION__);
+ dev_err (&port->dev, "%s - no interrupt urb present, exiting\n", __func__);
status = -EINVAL;
goto release_es_lock;
}
urb->dev = dev;
status = usb_submit_urb (urb, GFP_KERNEL);
if (status) {
- dev_err (&port->dev, "%s - usb_submit_urb failed with value %d\n", __FUNCTION__, status);
+ dev_err (&port->dev, "%s - usb_submit_urb failed with value %d\n", __func__, status);
goto release_es_lock;
}
}
/* start up our bulk read urb */
urb = port->read_urb;
if (!urb) {
- dev_err (&port->dev, "%s - no read urb present, exiting\n", __FUNCTION__);
+ dev_err (&port->dev, "%s - no read urb present, exiting\n", __func__);
status = -EINVAL;
goto unlink_int_urb;
}
urb->dev = dev;
status = usb_submit_urb (urb, GFP_KERNEL);
if (status) {
- dev_err (&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __FUNCTION__, status);
+ dev_err (&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __func__, status);
goto unlink_int_urb;
}
++edge_serial->num_ports_open;
- dbg("%s - exited", __FUNCTION__);
+ dbg("%s - exited", __func__);
goto release_es_lock;
int port_number;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
edge_serial = usb_get_serial_data(port->serial);
edge_port = usb_get_serial_port_data(port);
/* assuming we can still talk to the device,
* send a close port command to it */
- dbg("%s - send umpc_close_port", __FUNCTION__);
+ dbg("%s - send umpc_close_port", __func__);
port_number = port->number - port->serial->minor;
status = TIWriteCommandSync (port->serial->dev,
UMPC_CLOSE_PORT,
mutex_unlock(&edge_serial->es_lock);
edge_port->close_pending = 0;
- dbg("%s - exited", __FUNCTION__);
+ dbg("%s - exited", __func__);
}
static int edge_write (struct usb_serial_port *port, const unsigned char *data, int count)
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (count == 0) {
- dbg("%s - write request of 0 bytes", __FUNCTION__);
+ dbg("%s - write request of 0 bytes", __func__);
return 0;
}
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&edge_port->ep_lock, flags);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer);
/* set up our urb */
usb_fill_bulk_urb (port->write_urb, port->serial->dev,
/* send the data out the bulk port */
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result);
edge_port->ep_write_urb_in_use = 0;
// TODO: reschedule edge_send
} else {
int room = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return -ENODEV;
room = edge_buf_space_avail(edge_port->ep_out_buf);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return room;
}
int chars = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return -ENODEV;
chars = edge_buf_data_avail(edge_port->ep_out_buf);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- dbg ("%s - returns %d", __FUNCTION__, chars);
+ dbg ("%s - returns %d", __func__, chars);
return chars;
}
struct tty_struct *tty;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return;
tty = port->tty;
if (!tty) {
- dbg ("%s - no tty available", __FUNCTION__);
+ dbg ("%s - no tty available", __func__);
return;
}
unsigned char stop_char = STOP_CHAR(tty);
status = edge_write (port, &stop_char, 1);
if (status <= 0) {
- dev_err(&port->dev, "%s - failed to write stop character, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - failed to write stop character, %d\n", __func__, status);
}
}
struct tty_struct *tty;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return;
tty = port->tty;
if (!tty) {
- dbg ("%s - no tty available", __FUNCTION__);
+ dbg ("%s - no tty available", __func__);
return;
}
unsigned char start_char = START_CHAR(tty);
status = edge_write (port, &start_char, 1);
if (status <= 0) {
- dev_err(&port->dev, "%s - failed to write start character, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status);
}
}
if (C_CRTSCTS(tty)) {
status = restart_read(edge_port);
if (status)
- dev_err(&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __func__, status);
}
}
int status;
int port_number = edge_port->port->number - edge_port->port->serial->minor;
- dbg("%s - port %d", __FUNCTION__, edge_port->port->number);
+ dbg("%s - port %d", __func__, edge_port->port->number);
tty = edge_port->port->tty;
config = kmalloc (sizeof (*config), GFP_KERNEL);
if (!config) {
- dev_err (&edge_port->port->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (&edge_port->port->dev, "%s - out of memory\n", __func__);
return;
}
switch (cflag & CSIZE) {
case CS5:
config->bDataBits = UMP_UART_CHAR5BITS;
- dbg ("%s - data bits = 5", __FUNCTION__);
+ dbg ("%s - data bits = 5", __func__);
break;
case CS6:
config->bDataBits = UMP_UART_CHAR6BITS;
- dbg ("%s - data bits = 6", __FUNCTION__);
+ dbg ("%s - data bits = 6", __func__);
break;
case CS7:
config->bDataBits = UMP_UART_CHAR7BITS;
- dbg ("%s - data bits = 7", __FUNCTION__);
+ dbg ("%s - data bits = 7", __func__);
break;
default:
case CS8:
config->bDataBits = UMP_UART_CHAR8BITS;
- dbg ("%s - data bits = 8", __FUNCTION__);
+ dbg ("%s - data bits = 8", __func__);
break;
}
if (cflag & PARODD) {
config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
config->bParity = UMP_UART_ODDPARITY;
- dbg("%s - parity = odd", __FUNCTION__);
+ dbg("%s - parity = odd", __func__);
} else {
config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
config->bParity = UMP_UART_EVENPARITY;
- dbg("%s - parity = even", __FUNCTION__);
+ dbg("%s - parity = even", __func__);
}
} else {
config->bParity = UMP_UART_NOPARITY;
- dbg("%s - parity = none", __FUNCTION__);
+ dbg("%s - parity = none", __func__);
}
if (cflag & CSTOPB) {
config->bStopBits = UMP_UART_STOPBIT2;
- dbg("%s - stop bits = 2", __FUNCTION__);
+ dbg("%s - stop bits = 2", __func__);
} else {
config->bStopBits = UMP_UART_STOPBIT1;
- dbg("%s - stop bits = 1", __FUNCTION__);
+ dbg("%s - stop bits = 1", __func__);
}
/* figure out the flow control settings */
if (cflag & CRTSCTS) {
config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW;
config->wFlags |= UMP_MASK_UART_FLAGS_RTS_FLOW;
- dbg("%s - RTS/CTS is enabled", __FUNCTION__);
+ dbg("%s - RTS/CTS is enabled", __func__);
} else {
- dbg("%s - RTS/CTS is disabled", __FUNCTION__);
+ dbg("%s - RTS/CTS is disabled", __func__);
tty->hw_stopped = 0;
restart_read(edge_port);
}
if (I_IXOFF(tty)) {
config->wFlags |= UMP_MASK_UART_FLAGS_IN_X;
dbg ("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
- __FUNCTION__, config->cXon, config->cXoff);
+ __func__, config->cXon, config->cXoff);
} else {
- dbg ("%s - INBOUND XON/XOFF is disabled", __FUNCTION__);
+ dbg ("%s - INBOUND XON/XOFF is disabled", __func__);
}
/* if we are implementing OUTBOUND XON/XOFF */
if (I_IXON(tty)) {
config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X;
dbg ("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
- __FUNCTION__, config->cXon, config->cXoff);
+ __func__, config->cXon, config->cXoff);
} else {
- dbg ("%s - OUTBOUND XON/XOFF is disabled", __FUNCTION__);
+ dbg ("%s - OUTBOUND XON/XOFF is disabled", __func__);
}
}
/* FIXME: Recompute actual baud from divisor here */
- dbg ("%s - baud rate = %d, wBaudRate = %d", __FUNCTION__, baud, config->wBaudRate);
+ dbg ("%s - baud rate = %d, wBaudRate = %d", __func__, baud, config->wBaudRate);
dbg ("wBaudRate: %d", (int)(461550L / config->wBaudRate));
dbg ("wFlags: 0x%x", config->wFlags);
sizeof(*config));
if (status) {
dbg ("%s - error %d when trying to write config to device",
- __FUNCTION__, status);
+ __func__, status);
}
kfree (config);
cflag = tty->termios->c_cflag;
- dbg("%s - clfag %08x iflag %08x", __FUNCTION__,
+ dbg("%s - clfag %08x iflag %08x", __func__,
tty->termios->c_cflag, tty->termios->c_iflag);
- dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
+ dbg("%s - old clfag %08x old iflag %08x", __func__,
old_termios->c_cflag, old_termios->c_iflag);
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return;
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned int mcr;
+ unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
+ spin_lock_irqsave(&edge_port->ep_lock, flags);
mcr = edge_port->shadow_mcr;
if (set & TIOCM_RTS)
mcr |= MCR_RTS;
mcr &= ~MCR_LOOPBACK;
edge_port->shadow_mcr = mcr;
+ spin_unlock_irqrestore(&edge_port->ep_lock, flags);
TIRestoreMCR (edge_port, mcr);
unsigned int result = 0;
unsigned int msr;
unsigned int mcr;
+ unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
+
+ spin_lock_irqsave(&edge_port->ep_lock, flags);
msr = edge_port->shadow_msr;
mcr = edge_port->shadow_mcr;
| ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
- dbg("%s -- %x", __FUNCTION__, result);
+ dbg("%s -- %x", __func__, result);
+ spin_unlock_irqrestore(&edge_port->ep_lock, flags);
return result;
}
struct async_icount cnow;
struct async_icount cprev;
- dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
switch (cmd) {
case TIOCINQ:
- dbg("%s - (%d) TIOCINQ", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCINQ", __func__, port->number);
// return get_number_bytes_avail(edge_port, (unsigned int *) arg);
break;
case TIOCSERGETLSR:
- dbg("%s - (%d) TIOCSERGETLSR", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCSERGETLSR", __func__, port->number);
// return get_lsr_info(edge_port, (unsigned int *) arg);
break;
case TIOCGSERIAL:
- dbg("%s - (%d) TIOCGSERIAL", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCGSERIAL", __func__, port->number);
return get_serial_info(edge_port, (struct serial_struct __user *) arg);
break;
case TIOCSSERIAL:
- dbg("%s - (%d) TIOCSSERIAL", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCSSERIAL", __func__, port->number);
break;
case TIOCMIWAIT:
- dbg("%s - (%d) TIOCMIWAIT", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
cprev = edge_port->icount;
while (1) {
interruptible_sleep_on(&edge_port->delta_msr_wait);
break;
case TIOCGICOUNT:
- dbg ("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__,
+ dbg ("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
port->number, edge_port->icount.rx, edge_port->icount.tx);
if (copy_to_user((void __user *)arg, &edge_port->icount, sizeof(edge_port->icount)))
return -EFAULT;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int status;
- dbg ("%s - state = %d", __FUNCTION__, break_state);
+ dbg ("%s - state = %d", __func__, break_state);
/* chase the port close */
TIChasePort (edge_port, 0, 0);
}
if (status) {
dbg ("%s - error %d sending break set/clear command.",
- __FUNCTION__, status);
+ __func__, status);
}
}
/* create our private serial structure */
edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
if (edge_serial == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__);
+ dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
return -ENOMEM;
}
mutex_init(&edge_serial->es_lock);
for (i = 0; i < serial->num_ports; ++i) {
edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
if (edge_port == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__);
+ dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
goto cleanup;
}
spin_lock_init(&edge_port->ep_lock);
edge_port->ep_out_buf = edge_buf_alloc(EDGE_OUT_BUF_SIZE);
if (edge_port->ep_out_buf == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__);
+ dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
kfree(edge_port);
goto cleanup;
}
int i;
struct edgeport_port *edge_port;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
for (i = 0; i < serial->num_ports; ++i) {
edge_port = usb_get_serial_port_data(serial->port[i]);
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned int v = simple_strtoul(valbuf, NULL, 0);
- dbg("%s: setting uart_mode = %d", __FUNCTION__, v);
+ dbg("%s: setting uart_mode = %d", __func__, v);
if (v < 256)
edge_port->bUartMode = v;
else
- dev_err(dev, "%s - uart_mode %d is invalid\n", __FUNCTION__, v);
+ dev_err(dev, "%s - uart_mode %d is invalid\n", __func__, v);
return count;
}
.description = "Edgeport TI 1 port adapter",
.usb_driver = &io_driver,
.id_table = edgeport_1port_id_table,
- .num_interrupt_in = 1,
- .num_bulk_in = 1,
- .num_bulk_out = 1,
.num_ports = 1,
.open = edge_open,
.close = edge_close,
.description = "Edgeport TI 2 port adapter",
.usb_driver = &io_driver,
.id_table = edgeport_2port_id_table,
- .num_interrupt_in = 1,
- .num_bulk_in = 2,
- .num_bulk_out = 2,
.num_ports = 2,
.open = edge_open,
.close = edge_close,
projects / linux-2.6-omap-h63xx.git / blobdiff