* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include "pl2303.h"
{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
- { USB_DEVICE(HL340_VENDOR_ID, HL340_PRODUCT_ID) },
{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
{ } /* Terminating entry */
};
#define CONTROL_RTS 0x02
#define BREAK_REQUEST_TYPE 0x21
-#define BREAK_REQUEST 0x23
+#define BREAK_REQUEST 0x23
#define BREAK_ON 0xffff
#define BREAK_OFF 0x0000
if (pb == NULL)
return 0;
- return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
+ return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
}
/*
if (pb == NULL)
return 0;
- return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
+ return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
}
/*
cleanup:
kfree(buf);
- for (--i; i>=0; --i) {
+ for (--i; i >= 0; --i) {
priv = usb_get_serial_port_data(serial->port[i]);
pl2303_buf_free(priv->buf);
kfree(priv);
static int set_control_lines(struct usb_device *dev, u8 value)
{
int retval;
-
+
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
value, 0, NULL, 0, 100);
dev_err(&port->dev, "%s - failed submitting write urb,"
" error %d\n", __func__, result);
priv->write_urb_in_use = 0;
- // TODO: reschedule pl2303_send
+ /* TODO: reschedule pl2303_send */
}
usb_serial_port_softint(port);
}
-static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf,
- int count)
+static int pl2303_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
return count;
}
-static int pl2303_write_room(struct usb_serial_port *port)
+static int pl2303_write_room(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
struct pl2303_private *priv = usb_get_serial_port_data(port);
int room = 0;
unsigned long flags;
return room;
}
-static int pl2303_chars_in_buffer(struct usb_serial_port *port)
+static int pl2303_chars_in_buffer(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
struct pl2303_private *priv = usb_get_serial_port_data(port);
int chars = 0;
unsigned long flags;
return chars;
}
-static void pl2303_set_termios(struct usb_serial_port *port,
- struct ktermios *old_termios)
+static void pl2303_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct pl2303_private *priv = usb_get_serial_port_data(port);
spin_lock_irqsave(&priv->lock, flags);
if (!priv->termios_initialized) {
- *(port->tty->termios) = tty_std_termios;
- port->tty->termios->c_cflag = B9600 | CS8 | CREAD |
- HUPCL | CLOCAL;
- port->tty->termios->c_ispeed = 9600;
- port->tty->termios->c_ospeed = 9600;
+ *(tty->termios) = tty_std_termios;
+ tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios->c_ispeed = 9600;
+ tty->termios->c_ospeed = 9600;
priv->termios_initialized = 1;
}
spin_unlock_irqrestore(&priv->lock, flags);
serial settings even to the same values as before. Thus
we actually need to filter in this specific case */
- if (!tty_termios_hw_change(port->tty->termios, old_termios))
+ if (!tty_termios_hw_change(tty->termios, old_termios))
return;
- cflag = port->tty->termios->c_cflag;
+ cflag = tty->termios->c_cflag;
buf = kzalloc(7, GFP_KERNEL);
if (!buf) {
dev_err(&port->dev, "%s - out of memory.\n", __func__);
/* Report back no change occurred */
- *port->tty->termios = *old_termios;
+ *tty->termios = *old_termios;
return;
}
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
- case CS5: buf[6] = 5; break;
- case CS6: buf[6] = 6; break;
- case CS7: buf[6] = 7; break;
- default:
- case CS8: buf[6] = 8; break;
+ case CS5:
+ buf[6] = 5;
+ break;
+ case CS6:
+ buf[6] = 6;
+ break;
+ case CS7:
+ buf[6] = 7;
+ break;
+ default:
+ case CS8:
+ buf[6] = 8;
+ break;
}
dbg("%s - data bits = %d", __func__, buf[6]);
}
- baud = tty_get_baud_rate(port->tty);;
+ baud = tty_get_baud_rate(tty);
dbg("%s - baud = %d", __func__, baud);
if (baud) {
buf[0] = baud & 0xff;
/* FIXME: Need to read back resulting baud rate */
if (baud)
- tty_encode_baud_rate(port->tty, baud, baud);
+ tty_encode_baud_rate(tty, baud, baud);
kfree(buf);
}
-static void pl2303_close(struct usb_serial_port *port, struct file *filp)
+static void pl2303_close(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
timeout = PL2303_CLOSING_WAIT;
init_waitqueue_entry(&wait, current);
- add_wait_queue(&port->tty->write_wait, &wait);
+ add_wait_queue(&tty->write_wait, &wait);
for (;;) {
set_current_state(TASK_INTERRUPTIBLE);
if (pl2303_buf_data_avail(priv->buf) == 0 ||
spin_lock_irqsave(&priv->lock, flags);
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->tty->write_wait, &wait);
+ remove_wait_queue(&tty->write_wait, &wait);
/* clear out any remaining data in the buffer */
pl2303_buf_clear(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
/* for lower rates we should really know how much */
/* data is in the buffer to compute a delay */
/* that is not unnecessarily long) */
- bps = tty_get_baud_rate(port->tty);
+ bps = tty_get_baud_rate(tty);
if (bps > 1200)
- timeout = max((HZ*2560)/bps,HZ/10);
+ timeout = max((HZ*2560)/bps, HZ/10);
else
timeout = 2*HZ;
schedule_timeout_interruptible(timeout);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
- if (port->tty) {
- c_cflag = port->tty->termios->c_cflag;
+ if (tty) {
+ c_cflag = tty->termios->c_cflag;
if (c_cflag & HUPCL) {
/* drop DTR and RTS */
spin_lock_irqsave(&priv->lock, flags);
}
}
-static int pl2303_open(struct usb_serial_port *port, struct file *filp)
+static int pl2303_open(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp)
{
struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
}
/* Setup termios */
- if (port->tty) {
- pl2303_set_termios(port, &tmp_termios);
- }
+ if (tty)
+ pl2303_set_termios(tty, port, &tmp_termios);
- //FIXME: need to assert RTS and DTR if CRTSCTS off
+ /* FIXME: need to assert RTS and DTR if CRTSCTS off */
dbg("%s - submitting read urb", __func__);
port->read_urb->dev = serial->dev;
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb,"
" error %d\n", __func__, result);
- pl2303_close(port, NULL);
+ pl2303_close(tty, port, NULL);
return -EPROTO;
}
if (result) {
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
" error %d\n", __func__, result);
- pl2303_close(port, NULL);
+ pl2303_close(tty, port, NULL);
return -EPROTO;
}
return 0;
}
-static int pl2303_tiocmset(struct usb_serial_port *port, struct file *file,
+static int pl2303_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
+ struct usb_serial_port *port = tty->driver_data;
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
u8 control;
return set_control_lines(port->serial->dev, control);
}
-static int pl2303_tiocmget(struct usb_serial_port *port, struct file *file)
+static int pl2303_tiocmget(struct tty_struct *tty, struct file *file)
{
+ struct usb_serial_port *port = tty->driver_data;
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned int mcr;
status = priv->line_status;
spin_unlock_irqrestore(&priv->lock, flags);
- changed=prevstatus^status;
+ changed = prevstatus ^ status;
if (((arg & TIOCM_RNG) && (changed & UART_RING)) ||
((arg & TIOCM_DSR) && (changed & UART_DSR)) ||
((arg & TIOCM_CD) && (changed & UART_DCD)) ||
- ((arg & TIOCM_CTS) && (changed & UART_CTS)) ) {
+ ((arg & TIOCM_CTS) && (changed & UART_CTS))) {
return 0;
}
prevstatus = status;
return 0;
}
-static int pl2303_ioctl(struct usb_serial_port *port, struct file *file,
+static int pl2303_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
+ struct usb_serial_port *port = tty->driver_data;
dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
switch (cmd) {
- case TIOCMIWAIT:
- dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
- return wait_modem_info(port, arg);
-
- default:
- dbg("%s not supported = 0x%04x", __func__, cmd);
- break;
+ case TIOCMIWAIT:
+ dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
+ return wait_modem_info(port, arg);
+ default:
+ dbg("%s not supported = 0x%04x", __func__, cmd);
+ break;
}
-
return -ENOIOCTLCMD;
}
-static void pl2303_break_ctl(struct usb_serial_port *port, int break_state)
+static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
{
+ struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
u16 state;
int result;
state = BREAK_OFF;
else
state = BREAK_ON;
- dbg("%s - turning break %s", __func__, state==BREAK_OFF ? "off" : "on");
+ dbg("%s - turning break %s", __func__,
+ state == BREAK_OFF ? "off" : "on");
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
if (actual_length < length)
return;
- /* Save off the uart status for others to look at */
+ /* Save off the uart status for others to look at */
spin_lock_irqsave(&priv->lock, flags);
priv->line_status = data[status_idx];
spin_unlock_irqrestore(&priv->lock, flags);
if (status) {
dbg("%s - urb status = %d", __func__, status);
- if (!port->open_count) {
+ if (!port->port.count) {
dbg("%s - port is closed, exiting.", __func__);
return;
}
/* break takes precedence over parity, */
/* which takes precedence over framing errors */
- if (line_status & UART_BREAK_ERROR )
+ if (line_status & UART_BREAK_ERROR)
tty_flag = TTY_BREAK;
else if (line_status & UART_PARITY_ERROR)
tty_flag = TTY_PARITY;
tty_flag = TTY_FRAME;
dbg("%s - tty_flag = %d", __func__, tty_flag);
- tty = port->tty;
+ tty = port->port.tty;
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length + 1);
/* overrun is special, not associated with a char */
}
/* Schedule the next read _if_ we are still open */
- if (port->open_count) {
+ if (port->port.count) {
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
projects / linux-2.6-omap-h63xx.git / blobdiff