goto bailout_mutex_unlock;
}
+ retval = usb_autopm_get_interface(serial->interface);
+ if (retval)
+ goto bailout_module_put;
/* only call the device specific open if this
* is the first time the port is opened */
retval = serial->type->open(port, filp);
if (retval)
- goto bailout_module_put;
+ goto bailout_interface_put;
}
mutex_unlock(&port->mutex);
return 0;
+bailout_interface_put:
+ usb_autopm_put_interface(serial->interface);
bailout_module_put:
module_put(serial->type->driver.owner);
bailout_mutex_unlock:
}
--port->open_count;
- if (port->open_count == 0) {
+ if (port->open_count == 0)
/* only call the device specific close if this
* port is being closed by the last owner */
port->serial->type->close(port, filp);
+ if (port->open_count == (port->console? 1 : 0)) {
if (port->tty) {
if (port->tty->driver_data)
port->tty->driver_data = NULL;
port->tty = NULL;
}
+ }
+ if (port->open_count == 0) {
+ usb_autopm_put_interface(port->serial->interface);
module_put(port->serial->type->driver.owner);
}
/* pass on to the driver specific version of this function if it is available */
if (port->serial->type->set_termios)
port->serial->type->set_termios(port, old);
+ else
+ tty_termios_copy_hw(tty->termios, old);
}
static void serial_break (struct tty_struct *tty, int break_state)
{
usb_kill_urb(port->read_urb);
usb_kill_urb(port->write_urb);
+ /*
+ * This is tricky.
+ * Some drivers submit the read_urb in the
+ * handler for the write_urb or vice versa
+ * this order determines the order in which
+ * usb_kill_urb() must be used to reliably
+ * kill the URBs. As it is unknown here,
+ * both orders must be used in turn.
+ * The call below is not redundant.
+ */
+ usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
usb_kill_urb(port->interrupt_out_urb);
}
serial->type = driver;
serial->interface = interface;
kref_init(&serial->kref);
+ mutex_init(&serial->disc_mutex);
return serial;
}
static struct usb_serial_driver *search_serial_device(struct usb_interface *iface)
{
- struct list_head *p;
const struct usb_device_id *id;
- struct usb_serial_driver *t;
+ struct usb_serial_driver *drv;
/* Check if the usb id matches a known device */
- list_for_each(p, &usb_serial_driver_list) {
- t = list_entry(p, struct usb_serial_driver, driver_list);
- id = get_iface_id(t, iface);
+ list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
+ id = get_iface_id(drv, iface);
if (id)
- return t;
+ return drv;
}
return NULL;
/* END HORRIBLE HACK FOR PL2303 */
#endif
- /* found all that we need */
- dev_info(&interface->dev, "%s converter detected\n", type->description);
-
#ifdef CONFIG_USB_SERIAL_GENERIC
if (type == &usb_serial_generic_device) {
num_ports = num_bulk_out;
serial->num_interrupt_in = num_interrupt_in;
serial->num_interrupt_out = num_interrupt_out;
+#if 0
+ /* check that the device meets the driver's requirements */
+ if ((type->num_interrupt_in != NUM_DONT_CARE &&
+ type->num_interrupt_in != num_interrupt_in)
+ || (type->num_interrupt_out != NUM_DONT_CARE &&
+ type->num_interrupt_out != num_interrupt_out)
+ || (type->num_bulk_in != NUM_DONT_CARE &&
+ type->num_bulk_in != num_bulk_in)
+ || (type->num_bulk_out != NUM_DONT_CARE &&
+ type->num_bulk_out != num_bulk_out)) {
+ dbg("wrong number of endpoints");
+ kfree(serial);
+ return -EIO;
+ }
+#endif
+
+ /* found all that we need */
+ dev_info(&interface->dev, "%s converter detected\n",
+ type->description);
+
/* create our ports, we need as many as the max endpoints */
/* we don't use num_ports here cauz some devices have more endpoint pairs than ports */
max_endpoints = max(num_bulk_in, num_bulk_out);
usb_serial_console_disconnect(serial);
dbg ("%s", __FUNCTION__);
+ mutex_lock(&serial->disc_mutex);
usb_set_intfdata (interface, NULL);
- if (serial) {
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
- if (port) {
- if (port->tty)
- tty_hangup(port->tty);
- kill_traffic(port);
- }
+ /* must set a flag, to signal subdrivers */
+ serial->disconnected = 1;
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ if (port) {
+ if (port->tty)
+ tty_hangup(port->tty);
+ kill_traffic(port);
}
- /* let the last holder of this object
- * cause it to be cleaned up */
- usb_serial_put(serial);
}
+ /* let the last holder of this object
+ * cause it to be cleaned up */
+ mutex_unlock(&serial->disc_mutex);
+ usb_serial_put(serial);
dev_info(dev, "device disconnected\n");
}
struct usb_serial_port *port;
int i, r = 0;
- if (!serial) /* device has been disconnected */
- return 0;
-
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
if (port)
{
struct usb_serial *serial = usb_get_intfdata(intf);
- return serial->type->resume(serial);
+ if (serial->type->resume)
+ return serial->type->resume(serial);
+ return 0;
}
EXPORT_SYMBOL(usb_serial_resume);
set_to_generic_if_null(device, read_bulk_callback);
set_to_generic_if_null(device, write_bulk_callback);
set_to_generic_if_null(device, shutdown);
+ set_to_generic_if_null(device, resume);
}
int usb_serial_register(struct usb_serial_driver *driver) /* must be called with BKL held */