*/
#include <linux/errno.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/cdrom.h>
#include "transport.h"
#include "protocol.h"
#include "debug.h"
-#include "shuttle_usbat.h"
+
+MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable");
+MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>, Robert Baruch <autophile@starband.net>");
+MODULE_LICENSE("GPL");
+
+/* Supported device types */
+#define USBAT_DEV_HP8200 0x01
+#define USBAT_DEV_FLASH 0x02
+
+#define USBAT_EPP_PORT 0x10
+#define USBAT_EPP_REGISTER 0x30
+#define USBAT_ATA 0x40
+#define USBAT_ISA 0x50
+
+/* Commands (need to be logically OR'd with an access type */
+#define USBAT_CMD_READ_REG 0x00
+#define USBAT_CMD_WRITE_REG 0x01
+#define USBAT_CMD_READ_BLOCK 0x02
+#define USBAT_CMD_WRITE_BLOCK 0x03
+#define USBAT_CMD_COND_READ_BLOCK 0x04
+#define USBAT_CMD_COND_WRITE_BLOCK 0x05
+#define USBAT_CMD_WRITE_REGS 0x07
+
+/* Commands (these don't need an access type) */
+#define USBAT_CMD_EXEC_CMD 0x80
+#define USBAT_CMD_SET_FEAT 0x81
+#define USBAT_CMD_UIO 0x82
+
+/* Methods of accessing UIO register */
+#define USBAT_UIO_READ 1
+#define USBAT_UIO_WRITE 0
+
+/* Qualifier bits */
+#define USBAT_QUAL_FCQ 0x20 /* full compare */
+#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */
+
+/* USBAT Flash Media status types */
+#define USBAT_FLASH_MEDIA_NONE 0
+#define USBAT_FLASH_MEDIA_CF 1
+
+/* USBAT Flash Media change types */
+#define USBAT_FLASH_MEDIA_SAME 0
+#define USBAT_FLASH_MEDIA_CHANGED 1
+
+/* USBAT ATA registers */
+#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */
+#define USBAT_ATA_FEATURES 0x11 /* set features (W) */
+#define USBAT_ATA_ERROR 0x11 /* error (R) */
+#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */
+#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */
+#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */
+#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */
+#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */
+#define USBAT_ATA_STATUS 0x17 /* device status (R) */
+#define USBAT_ATA_CMD 0x17 /* device command (W) */
+#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */
+
+/* USBAT User I/O Data registers */
+#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */
+#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */
+ /* CDT = ACKD & !UI1 & !UI0 */
+#define USBAT_UIO_1 0x20 /* I/O 1 */
+#define USBAT_UIO_0 0x10 /* I/O 0 */
+#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */
+#define USBAT_UIO_UI1 0x04 /* Input 1 */
+#define USBAT_UIO_UI0 0x02 /* Input 0 */
+#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
+
+/* USBAT User I/O Enable registers */
+#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */
+#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */
+#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */
+ /* If ACKD=1, set OE1 to 1 also. */
+#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */
+#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */
+
+/* USBAT Features */
+#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */
+#define USBAT_FEAT_U1 0x08
+#define USBAT_FEAT_U0 0x04
+#define USBAT_FEAT_ET1 0x02
+#define USBAT_FEAT_ET2 0x01
+
+struct usbat_info {
+ int devicetype;
+
+ /* Used for Flash readers only */
+ unsigned long sectors; /* total sector count */
+ unsigned long ssize; /* sector size in bytes */
+
+ unsigned char sense_key;
+ unsigned long sense_asc; /* additional sense code */
+ unsigned long sense_ascq; /* additional sense code qualifier */
+};
#define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) )
#define LSB_of(s) ((s)&0xFF)
static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
+static int init_usbat_cd(struct us_data *us);
+static int init_usbat_flash(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id usbat_usb_ids[] = {
+# include "unusual_usbat.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, usbat_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev usbat_unusual_dev_list[] = {
+# include "unusual_usbat.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
/*
* Convenience function to produce an ATA read/write sectors command
* Use cmd=0x20 for read, cmd=0x30 for write
return USB_STOR_TRANSPORT_FAILED;
}
-int init_usbat_cd(struct us_data *us)
+static int init_usbat_cd(struct us_data *us)
{
return init_usbat(us, USBAT_DEV_HP8200);
}
-
-int init_usbat_flash(struct us_data *us)
+static int init_usbat_flash(struct us_data *us)
{
return init_usbat(us, USBAT_DEV_FLASH);
}
-int init_usbat_probe(struct us_data *us)
+static int usbat_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
{
- return init_usbat(us, 0);
+ struct us_data *us;
+ int result;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - usbat_usb_ids) + usbat_unusual_dev_list);
+ if (result)
+ return result;
+
+ /* The actual transport will be determined later by the
+ * initialization routine; this is just a placeholder.
+ */
+ us->transport_name = "Shuttle USBAT";
+ us->transport = usbat_flash_transport;
+ us->transport_reset = usb_stor_CB_reset;
+ us->max_lun = 1;
+
+ result = usb_stor_probe2(us);
+ return result;
}
-/*
- * Default transport function. Attempts to detect which transport function
- * should be called, makes it the new default, and calls it.
- *
- * This function should never be called. Our usbat_init() function detects the
- * device type and changes the us->transport ptr to the transport function
- * relevant to the device.
- * However, we'll support this impossible(?) case anyway.
- */
-int usbat_transport(struct scsi_cmnd *srb, struct us_data *us)
+static struct usb_driver usbat_driver = {
+ .name = "ums-usbat",
+ .probe = usbat_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = usbat_usb_ids,
+ .soft_unbind = 1,
+};
+
+static int __init usbat_init(void)
{
- struct usbat_info *info = (struct usbat_info*) (us->extra);
-
- if (usbat_set_transport(us, info, 0))
- return USB_STOR_TRANSPORT_ERROR;
+ return usb_register(&usbat_driver);
+}
- return us->transport(srb, us);
+static void __exit usbat_exit(void)
+{
+ usb_deregister(&usbat_driver);
}
+
+module_init(usbat_init);
+module_exit(usbat_exit);
projects / linux-2.6-omap-h63xx.git / blobdiff