#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/kthread.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
#include "jumpshot.h"
#endif
-
+#ifdef CONFIG_USB_STORAGE_ONETOUCH
+#include "onetouch.h"
+#endif
+#ifdef CONFIG_USB_STORAGE_ALAUDA
+#include "alauda.h"
+#endif
/* Some informational data */
MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
static DECLARE_COMPLETION(threads_gone);
-static int storage_probe(struct usb_interface *iface,
- const struct usb_device_id *id);
-
-static void storage_disconnect(struct usb_interface *iface);
-
-/* The entries in this table, except for final ones here
- * (USB_MASS_STORAGE_CLASS and the empty entry), correspond,
- * line for line with the entries of us_unsuaul_dev_list[].
+/*
+ * The entries in this table correspond, line for line,
+ * with the entries of us_unusual_dev_list[].
*/
+#ifndef CONFIG_USB_LIBUSUAL
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
vendorName, productName,useProtocol, useTransport, \
initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax) }
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
+ .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+#define USUAL_DEV(useProto, useTrans, useType) \
+{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
+ .driver_info = (USB_US_TYPE_STOR<<24) }
static struct usb_device_id storage_usb_ids [] = {
# include "unusual_devs.h"
#undef UNUSUAL_DEV
- /* Control/Bulk transport for all SubClass values */
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CB) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CB) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CB) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CB) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CB) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CB) },
-
- /* Control/Bulk/Interrupt transport for all SubClass values */
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CBI) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CBI) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CBI) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CBI) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CBI) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CBI) },
-
- /* Bulk-only transport for all SubClass values */
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_BULK) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_BULK) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_BULK) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_BULK) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_BULK) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) },
-
+#undef USUAL_DEV
/* Terminating entry */
{ }
};
MODULE_DEVICE_TABLE (usb, storage_usb_ids);
+#endif /* CONFIG_USB_LIBUSUAL */
/* This is the list of devices we recognize, along with their flag data */
* are free to use as many characters as you like.
*/
-#undef UNUSUAL_DEV
#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
vendor_name, product_name, use_protocol, use_transport, \
init_function, Flags) \
.useProtocol = use_protocol, \
.useTransport = use_transport, \
.initFunction = init_function, \
- .flags = Flags, \
+}
+
+#define USUAL_DEV(use_protocol, use_transport, use_type) \
+{ \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
}
static struct us_unusual_dev us_unusual_dev_list[] = {
# include "unusual_devs.h"
# undef UNUSUAL_DEV
- /* Control/Bulk transport for all SubClass values */
- { .useProtocol = US_SC_RBC,
- .useTransport = US_PR_CB},
- { .useProtocol = US_SC_8020,
- .useTransport = US_PR_CB},
- { .useProtocol = US_SC_QIC,
- .useTransport = US_PR_CB},
- { .useProtocol = US_SC_UFI,
- .useTransport = US_PR_CB},
- { .useProtocol = US_SC_8070,
- .useTransport = US_PR_CB},
- { .useProtocol = US_SC_SCSI,
- .useTransport = US_PR_CB},
-
- /* Control/Bulk/Interrupt transport for all SubClass values */
- { .useProtocol = US_SC_RBC,
- .useTransport = US_PR_CBI},
- { .useProtocol = US_SC_8020,
- .useTransport = US_PR_CBI},
- { .useProtocol = US_SC_QIC,
- .useTransport = US_PR_CBI},
- { .useProtocol = US_SC_UFI,
- .useTransport = US_PR_CBI},
- { .useProtocol = US_SC_8070,
- .useTransport = US_PR_CBI},
- { .useProtocol = US_SC_SCSI,
- .useTransport = US_PR_CBI},
-
- /* Bulk-only transport for all SubClass values */
- { .useProtocol = US_SC_RBC,
- .useTransport = US_PR_BULK},
- { .useProtocol = US_SC_8020,
- .useTransport = US_PR_BULK},
- { .useProtocol = US_SC_QIC,
- .useTransport = US_PR_BULK},
- { .useProtocol = US_SC_UFI,
- .useTransport = US_PR_BULK},
- { .useProtocol = US_SC_8070,
- .useTransport = US_PR_BULK},
- { .useProtocol = US_SC_SCSI,
- .useTransport = US_PR_BULK},
+# undef USUAL_DEV
/* Terminating entry */
{ NULL }
};
-static struct usb_driver usb_storage_driver = {
- .owner = THIS_MODULE,
- .name = "usb-storage",
- .probe = storage_probe,
- .disconnect = storage_disconnect,
- .id_table = storage_usb_ids,
-};
+
+#ifdef CONFIG_PM /* Minimal support for suspend and resume */
+
+static int storage_suspend(struct usb_interface *iface, pm_message_t message)
+{
+ struct us_data *us = usb_get_intfdata(iface);
+
+ /* Wait until no command is running */
+ down(&us->dev_semaphore);
+
+ US_DEBUGP("%s\n", __FUNCTION__);
+ if (us->suspend_resume_hook)
+ (us->suspend_resume_hook)(us, US_SUSPEND);
+ iface->dev.power.power_state.event = message.event;
+
+ /* When runtime PM is working, we'll set a flag to indicate
+ * whether we should autoresume when a SCSI request arrives. */
+
+ up(&us->dev_semaphore);
+ return 0;
+}
+
+static int storage_resume(struct usb_interface *iface)
+{
+ struct us_data *us = usb_get_intfdata(iface);
+
+ down(&us->dev_semaphore);
+
+ US_DEBUGP("%s\n", __FUNCTION__);
+ if (us->suspend_resume_hook)
+ (us->suspend_resume_hook)(us, US_RESUME);
+ iface->dev.power.power_state.event = PM_EVENT_ON;
+
+ up(&us->dev_semaphore);
+ return 0;
+}
+
+#endif /* CONFIG_PM */
/*
* fill_inquiry_response takes an unsigned char array (which must
struct us_data *us = (struct us_data *)__us;
struct Scsi_Host *host = us_to_host(us);
- lock_kernel();
-
- /*
- * This thread doesn't need any user-level access,
- * so get rid of all our resources.
- */
- daemonize("usb-storage");
current->flags |= PF_NOFREEZE;
- unlock_kernel();
-
- /* acquire a reference to the host, so it won't be deallocated
- * until we're ready to exit */
- scsi_host_get(host);
-
- /* signal that we've started the thread */
- complete(&(us->notify));
for(;;) {
US_DEBUGP("*** thread sleeping.\n");
/* If an abort request was received we need to signal that
* the abort has finished. The proper test for this is
* the TIMED_OUT flag, not srb->result == DID_ABORT, because
- * a timeout/abort request might be received after all the
- * USB processing was complete. */
- if (test_bit(US_FLIDX_TIMED_OUT, &us->flags))
+ * the timeout might have occurred after the command had
+ * already completed with a different result code. */
+ if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) {
complete(&(us->notify));
+ /* Allow USB transfers to resume */
+ clear_bit(US_FLIDX_ABORTING, &us->flags);
+ clear_bit(US_FLIDX_TIMED_OUT, &us->flags);
+ }
+
/* finished working on this command */
us->srb = NULL;
scsi_unlock(host);
US_DEBUGP("I/O buffer allocation failed\n");
return -ENOMEM;
}
+
+ us->sensebuf = kmalloc(US_SENSE_SIZE, GFP_KERNEL);
+ if (!us->sensebuf) {
+ US_DEBUGP("Sense buffer allocation failed\n");
+ return -ENOMEM;
+ }
return 0;
}
+/* Find an unusual_dev descriptor (always succeeds in the current code) */
+static struct us_unusual_dev *find_unusual(const struct usb_device_id *id)
+{
+ const int id_index = id - storage_usb_ids;
+ return &us_unusual_dev_list[id_index];
+}
+
/* Get the unusual_devs entries and the string descriptors */
-static void get_device_info(struct us_data *us, int id_index)
+static void get_device_info(struct us_data *us, const struct usb_device_id *id)
{
struct usb_device *dev = us->pusb_dev;
struct usb_interface_descriptor *idesc =
&us->pusb_intf->cur_altsetting->desc;
- struct us_unusual_dev *unusual_dev = &us_unusual_dev_list[id_index];
- struct usb_device_id *id = &storage_usb_ids[id_index];
+ struct us_unusual_dev *unusual_dev = find_unusual(id);
/* Store the entries */
us->unusual_dev = unusual_dev;
us->protocol = (unusual_dev->useTransport == US_PR_DEVICE) ?
idesc->bInterfaceProtocol :
unusual_dev->useTransport;
- us->flags = unusual_dev->flags;
+ us->flags = USB_US_ORIG_FLAGS(id->driver_info);
/*
* This flag is only needed when we're in high-speed, so let's
* from the unusual_devs.h table.
*/
if (id->idVendor || id->idProduct) {
- static char *msgs[3] = {
+ static const char *msgs[3] = {
"an unneeded SubClass entry",
"an unneeded Protocol entry",
"unneeded SubClass and Protocol entries"};
if (unusual_dev->useTransport != US_PR_DEVICE &&
us->protocol == idesc->bInterfaceProtocol)
msg += 2;
- if (msg >= 0 && !(unusual_dev->flags & US_FL_NEED_OVERRIDE))
+ if (msg >= 0 && !(us->flags & US_FL_NEED_OVERRIDE))
printk(KERN_NOTICE USB_STORAGE "This device "
"(%04x,%04x,%04x S %02x P %02x)"
" has %s in unusual_devs.h\n"
break;
#ifdef CONFIG_USB_STORAGE_USBAT
- case US_PR_SCM_ATAPI:
- us->transport_name = "SCM/ATAPI";
+ case US_PR_USBAT:
+ us->transport_name = "Shuttle USBAT";
us->transport = usbat_transport;
us->transport_reset = usb_stor_CB_reset;
us->max_lun = 1;
break;
#endif
+#ifdef CONFIG_USB_STORAGE_ALAUDA
+ case US_PR_ALAUDA:
+ us->transport_name = "Alauda Control/Bulk";
+ us->transport = alauda_transport;
+ us->transport_reset = usb_stor_Bulk_reset;
+ us->max_lun = 1;
+ break;
+#endif
+
default:
return -EIO;
}
static int usb_stor_acquire_resources(struct us_data *us)
{
int p;
+ struct task_struct *th;
us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!us->current_urb) {
return -ENOMEM;
}
- /* Lock the device while we carry out the next two operations */
- down(&us->dev_semaphore);
-
- /* For bulk-only devices, determine the max LUN value */
- if (us->protocol == US_PR_BULK) {
- p = usb_stor_Bulk_max_lun(us);
- if (p < 0) {
- up(&us->dev_semaphore);
- return p;
- }
- us->max_lun = p;
- }
-
/* Just before we start our control thread, initialize
* the device if it needs initialization */
- if (us->unusual_dev->initFunction)
- us->unusual_dev->initFunction(us);
-
- up(&us->dev_semaphore);
+ if (us->unusual_dev->initFunction) {
+ p = us->unusual_dev->initFunction(us);
+ if (p)
+ return p;
+ }
/* Start up our control thread */
- p = kernel_thread(usb_stor_control_thread, us, CLONE_VM);
- if (p < 0) {
+ th = kthread_create(usb_stor_control_thread, us, "usb-storage");
+ if (IS_ERR(th)) {
printk(KERN_WARNING USB_STORAGE
"Unable to start control thread\n");
- return p;
+ return PTR_ERR(th);
}
- us->pid = p;
- atomic_inc(&total_threads);
- /* Wait for the thread to start */
- wait_for_completion(&(us->notify));
+ /* Take a reference to the host for the control thread and
+ * count it among all the threads we have launched. Then
+ * start it up. */
+ scsi_host_get(us_to_host(us));
+ atomic_inc(&total_threads);
+ wake_up_process(th);
return 0;
}
* any more commands.
*/
US_DEBUGP("-- sending exit command to thread\n");
+ set_bit(US_FLIDX_DISCONNECTING, &us->flags);
up(&us->sema);
/* Call the destructor routine, if it exists */
{
US_DEBUGP("-- %s\n", __FUNCTION__);
+ kfree(us->sensebuf);
+
/* Free the device-related DMA-mapped buffers */
if (us->cr)
usb_buffer_free(us->pusb_dev, sizeof(*us->cr), us->cr,
usb_set_intfdata(us->pusb_intf, NULL);
}
-/* Thread to carry out delayed SCSI-device scanning */
-static int usb_stor_scan_thread(void * __us)
+/* First stage of disconnect processing: stop all commands and remove
+ * the host */
+static void quiesce_and_remove_host(struct us_data *us)
{
- struct us_data *us = (struct us_data *)__us;
+ /* Prevent new USB transfers, stop the current command, and
+ * interrupt a SCSI-scan or device-reset delay */
+ set_bit(US_FLIDX_DISCONNECTING, &us->flags);
+ usb_stor_stop_transport(us);
+ wake_up(&us->delay_wait);
- /*
- * This thread doesn't need any user-level access,
- * so get rid of all our resources.
- */
- lock_kernel();
- daemonize("usb-stor-scan");
- unlock_kernel();
+ /* It doesn't matter if the SCSI-scanning thread is still running.
+ * The thread will exit when it sees the DISCONNECTING flag. */
- /* Acquire a reference to the host, so it won't be deallocated
- * until we're ready to exit */
- scsi_host_get(us_to_host(us));
+ /* Wait for the current command to finish, then remove the host */
+ down(&us->dev_semaphore);
+ up(&us->dev_semaphore);
+
+ /* queuecommand won't accept any new commands and the control
+ * thread won't execute a previously-queued command. If there
+ * is such a command pending, complete it with an error. */
+ if (us->srb) {
+ us->srb->result = DID_NO_CONNECT << 16;
+ scsi_lock(us_to_host(us));
+ us->srb->scsi_done(us->srb);
+ us->srb = NULL;
+ scsi_unlock(us_to_host(us));
+ }
+
+ /* Now we own no commands so it's safe to remove the SCSI host */
+ scsi_remove_host(us_to_host(us));
+}
+
+/* Second stage of disconnect processing: deallocate all resources */
+static void release_everything(struct us_data *us)
+{
+ usb_stor_release_resources(us);
+ dissociate_dev(us);
+
+ /* Drop our reference to the host; the SCSI core will free it
+ * (and "us" along with it) when the refcount becomes 0. */
+ scsi_host_put(us_to_host(us));
+}
- /* Signal that we've started the thread */
- complete(&(us->notify));
+/* Thread to carry out delayed SCSI-device scanning */
+static int usb_stor_scan_thread(void * __us)
+{
+ struct us_data *us = (struct us_data *)__us;
printk(KERN_DEBUG
"usb-storage: device found at %d\n", us->pusb_dev->devnum);
/* If the device is still connected, perform the scanning */
if (!test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
+
+ /* For bulk-only devices, determine the max LUN value */
+ if (us->protocol == US_PR_BULK &&
+ !(us->flags & US_FL_SINGLE_LUN)) {
+ down(&us->dev_semaphore);
+ us->max_lun = usb_stor_Bulk_max_lun(us);
+ up(&us->dev_semaphore);
+ }
scsi_scan_host(us_to_host(us));
printk(KERN_DEBUG "usb-storage: device scan complete\n");
{
struct Scsi_Host *host;
struct us_data *us;
- const int id_index = id - storage_usb_ids;
int result;
+ struct task_struct *th;
+
+ if (usb_usual_check_type(id, USB_US_TYPE_STOR))
+ return -ENXIO;
US_DEBUGP("USB Mass Storage device detected\n");
* of the match from the usb_device_id table, so we can find the
* corresponding entry in the private table.
*/
- get_device_info(us, id_index);
-
-#ifdef CONFIG_USB_STORAGE_SDDR09
- if (us->protocol == US_PR_EUSB_SDDR09 ||
- us->protocol == US_PR_DPCM_USB) {
- /* set the configuration -- STALL is an acceptable response here */
- if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) {
- US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev
- ->actconfig->desc.bConfigurationValue);
- goto BadDevice;
- }
- result = usb_reset_configuration(us->pusb_dev);
-
- US_DEBUGP("Result of usb_reset_configuration is %d\n", result);
- if (result == -EPIPE) {
- US_DEBUGP("-- stall on control interface\n");
- } else if (result != 0) {
- /* it's not a stall, but another error -- time to bail */
- US_DEBUGP("-- Unknown error. Rejecting device\n");
- goto BadDevice;
- }
- }
-#endif
+ get_device_info(us, id);
/* Get the transport, protocol, and pipe settings */
result = get_transport(us);
}
/* Start up the thread for delayed SCSI-device scanning */
- result = kernel_thread(usb_stor_scan_thread, us, CLONE_VM);
- if (result < 0) {
+ th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
+ if (IS_ERR(th)) {
printk(KERN_WARNING USB_STORAGE
"Unable to start the device-scanning thread\n");
- scsi_remove_host(host);
+ quiesce_and_remove_host(us);
+ result = PTR_ERR(th);
goto BadDevice;
}
- atomic_inc(&total_threads);
- /* Wait for the thread to start */
- wait_for_completion(&(us->notify));
+ /* Take a reference to the host for the scanning thread and
+ * count it among all the threads we have launched. Then
+ * start it up. */
+ scsi_host_get(us_to_host(us));
+ atomic_inc(&total_threads);
+ wake_up_process(th);
return 0;
/* We come here if there are any problems */
BadDevice:
US_DEBUGP("storage_probe() failed\n");
- set_bit(US_FLIDX_DISCONNECTING, &us->flags);
- usb_stor_release_resources(us);
- dissociate_dev(us);
- scsi_host_put(host);
+ release_everything(us);
return result;
}
struct us_data *us = usb_get_intfdata(intf);
US_DEBUGP("storage_disconnect() called\n");
-
- /* Prevent new USB transfers, stop the current command, and
- * interrupt a SCSI-scan or device-reset delay */
- set_bit(US_FLIDX_DISCONNECTING, &us->flags);
- usb_stor_stop_transport(us);
- wake_up(&us->delay_wait);
-
- /* It doesn't matter if the SCSI-scanning thread is still running.
- * The thread will exit when it sees the DISCONNECTING flag. */
-
- /* Wait for the current command to finish, then remove the host */
- down(&us->dev_semaphore);
- up(&us->dev_semaphore);
- scsi_remove_host(us_to_host(us));
-
- /* Wait for everything to become idle and release all our resources */
- usb_stor_release_resources(us);
- dissociate_dev(us);
-
- /* Drop our reference to the host; the SCSI core will free it
- * (and "us" along with it) when the refcount becomes 0. */
- scsi_host_put(us_to_host(us));
+ quiesce_and_remove_host(us);
+ release_everything(us);
}
/***********************************************************************
* Initialization and registration
***********************************************************************/
+static struct usb_driver usb_storage_driver = {
+ .name = "usb-storage",
+ .probe = storage_probe,
+ .disconnect = storage_disconnect,
+#ifdef CONFIG_PM
+ .suspend = storage_suspend,
+ .resume = storage_resume,
+#endif
+ .id_table = storage_usb_ids,
+};
+
static int __init usb_stor_init(void)
{
int retval;
/* register the driver, return usb_register return code if error */
retval = usb_register(&usb_storage_driver);
- if (retval == 0)
+ if (retval == 0) {
printk(KERN_INFO "USB Mass Storage support registered.\n");
-
+ usb_usual_set_present(USB_US_TYPE_STOR);
+ }
return retval;
}
wait_for_completion(&threads_gone);
atomic_dec(&total_threads);
}
+
+ usb_usual_clear_present(USB_US_TYPE_STOR);
}
module_init(usb_stor_init);