Merge branch 'for-rmk' of git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6.git

[linux-2.6-omap-h63xx.git] / drivers / video / Kconfig

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 9b887ef64ff1c27c857602833211dd2b6b2d7716..d85a74c64b54e3cffb70b262e0f1f40524e4ff6d 100644 (file)
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -172,11 +172,6 @@ config FB_DEFERRED_IO
        bool
        depends on FB
 
-config FB_METRONOME
-       tristate
-       depends on FB
-       depends on FB_DEFERRED_IO
-
 config FB_HECUBA
        tristate
        depends on FB
@@ -1658,6 +1653,32 @@ config FB_PM3
          similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
          and maybe other boards.
 
+config FB_CARMINE
+       tristate "Fujitsu carmine frame buffer support"
+       depends on FB && PCI
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       help
+         This is the frame buffer device driver for the Fujitsu Carmine chip.
+         The driver provides two independent frame buffer devices.
+
+choice
+       depends on FB_CARMINE
+       prompt "DRAM timing"
+       default FB_CARMINE_DRAM_EVAL
+
+config FB_CARMINE_DRAM_EVAL
+       bool "Eval board timings"
+       help
+         Use timings which work on the eval card.
+
+config CARMINE_DRAM_CUSTOM
+       bool "Custom board timings"
+       help
+         Use custom board timings.
+endchoice
+
 config FB_AU1100
        bool "Au1100 LCD Driver"
        depends on (FB = y) && MIPS && SOC_AU1100
@@ -1840,6 +1861,16 @@ config FB_W100
 
          If unsure, say N.
 
+config FB_SH_MOBILE_LCDC
+       tristate "SuperH Mobile LCDC framebuffer support"
+       depends on FB && SUPERH
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       default m
+       ---help---
+         Frame buffer driver for the on-chip SH-Mobile LCD controller.
+
 config FB_S3C2410
        tristate "S3C2410 LCD framebuffer support"
        depends on FB && ARCH_S3C2410
@@ -1938,18 +1969,22 @@ config FB_XILINX
          framebuffer. ML300 carries a 640*480 LCD display on the board,
          ML403 uses a standard DB15 VGA connector.
 
-config FB_AM200EPD
-       tristate "AM-200 E-Ink EPD devkit support"
-       depends on FB && ARCH_PXA && MMU
-       select FB_SYS_FILLRECT
-       select FB_SYS_COPYAREA
-       select FB_SYS_IMAGEBLIT
-       select FB_SYS_FOPS
-       select FB_DEFERRED_IO
-       select FB_METRONOME
+config FB_COBALT
+       tristate "Cobalt server LCD frame buffer support"
+       depends on FB && MIPS_COBALT
+
+config FB_SH7760
+       bool "SH7760/SH7763 LCDC support"
+       depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763)
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
        help
-         This enables support for the Metronome display controller used on
-         the E-Ink AM-200 EPD devkit.
+         Support for the SH7760/SH7763 integrated (D)STN/TFT LCD Controller.
+         Supports display resolutions up to 1024x1024 pixel, grayscale and
+         color operation, with depths ranging from 1 bpp to 8 bpp monochrome
+         and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
+         panels <= 320 pixel horizontal resolution.
 
 config FB_VIRTUAL
        tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
@@ -1988,6 +2023,19 @@ config XEN_FBDEV_FRONTEND
          frame buffer driver.  It communicates with a back-end
          in another domain.
 
+config FB_METRONOME
+       tristate "E-Ink Metronome/8track controller support"
+       depends on FB
+       select FB_SYS_FILLRECT
+       select FB_SYS_COPYAREA
+       select FB_SYS_IMAGEBLIT
+       select FB_SYS_FOPS
+       select FB_DEFERRED_IO
+       help
+         This driver implements support for the E-Ink Metronome
+         controller. The pre-release name for this device was 8track
+         and could also have been called by some vendors as PVI-nnnn.
+
 source "drivers/video/omap/Kconfig"
 
 source "drivers/video/backlight/Kconfig"