module_param(nocursor, int, 0644);
MODULE_PARM_DESC(nocursor, "cursor enable/disable");
+/* fb_blank
+ * Blank the screen. Depending on the mode, the screen will be
+ * activated with the backlight color, or desactivated
+ */
+static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
+{
+ struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+
+ print_dbg("fb_blank %d %p", blank_mode, fbi);
+
+ switch (blank_mode) {
+
+ case VESA_NO_BLANKING:
+ /* Turn on panel */
+ fbdev->regs->lcd_control |= LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+ if (drv_info.panel_idx == 1) {
+ au_writew(au_readw(PB1100_G_CONTROL)
+ | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+ PB1100_G_CONTROL);
+ }
+#endif
+ au_sync();
+ break;
+
+ case VESA_VSYNC_SUSPEND:
+ case VESA_HSYNC_SUSPEND:
+ case VESA_POWERDOWN:
+ /* Turn off panel */
+ fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+ if (drv_info.panel_idx == 1) {
+ au_writew(au_readw(PB1100_G_CONTROL)
+ & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+ PB1100_G_CONTROL);
+ }
+#endif
+ au_sync();
+ break;
+ default:
+ break;
+
+ }
+ return 0;
+}
+
/*
* Set hardware with var settings. This will enable the controller with a specific
* mode, normally validated with the fb_check_var method
return 0;
}
-/* fb_blank
- * Blank the screen. Depending on the mode, the screen will be
- * activated with the backlight color, or desactivated
- */
-int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
-{
- struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
-
- print_dbg("fb_blank %d %p", blank_mode, fbi);
-
- switch (blank_mode) {
-
- case VESA_NO_BLANKING:
- /* Turn on panel */
- fbdev->regs->lcd_control |= LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
- if (drv_info.panel_idx == 1) {
- au_writew(au_readw(PB1100_G_CONTROL)
- | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
- PB1100_G_CONTROL);
- }
-#endif
- au_sync();
- break;
-
- case VESA_VSYNC_SUSPEND:
- case VESA_HSYNC_SUSPEND:
- case VESA_POWERDOWN:
- /* Turn off panel */
- fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
- if (drv_info.panel_idx == 1) {
- au_writew(au_readw(PB1100_G_CONTROL)
- & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
- PB1100_G_CONTROL);
- }
-#endif
- au_sync();
- break;
- default:
- break;
-
- }
- return 0;
-}
-
/* fb_pan_display
* Pan display in x and/or y as specified
*/
/* AU1100 LCD controller device driver */
-int au1100fb_drv_probe(struct device *dev)
+static int __init au1100fb_drv_probe(struct platform_device *dev)
{
struct au1100fb_device *fbdev = NULL;
struct resource *regs_res;
fbdev->panel = &known_lcd_panels[drv_info.panel_idx];
- dev_set_drvdata(dev, (void*)fbdev);
+ platform_set_drvdata(dev, (void *)fbdev);
/* Allocate region for our registers and map them */
if (!(regs_res = platform_get_resource(to_platform_device(dev),
fb_dealloc_cmap(&fbdev->info.cmap);
}
kfree(fbdev);
- dev_set_drvdata(dev, NULL);
+ platform_set_drvdata(dev, NULL);
return 0;
}
-int au1100fb_drv_remove(struct device *dev)
+int au1100fb_drv_remove(struct platform_device *dev)
{
struct au1100fb_device *fbdev = NULL;
if (!dev)
return -ENODEV;
- fbdev = (struct au1100fb_device*) dev_get_drvdata(dev);
+ fbdev = (struct au1100fb_device *) platform_get_drvdata(dev);
#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
au1100fb_fb_blank(VESA_POWERDOWN, &fbdev->info);
static u32 sys_clksrc;
static struct au1100fb_regs fbregs;
-int au1100fb_drv_suspend(struct device *dev, pm_message_t state)
+int au1100fb_drv_suspend(struct platform_device *dev, pm_message_t state)
{
- struct au1100fb_device *fbdev = dev_get_drvdata(dev);
+ struct au1100fb_device *fbdev = platform_get_drvdata(dev);
if (!fbdev)
return 0;
return 0;
}
-int au1100fb_drv_resume(struct device *dev)
+int au1100fb_drv_resume(struct platform_device *dev)
{
- struct au1100fb_device *fbdev = dev_get_drvdata(dev);
+ struct au1100fb_device *fbdev = platform_get_drvdata(dev);
if (!fbdev)
return 0;
#define au1100fb_drv_resume NULL
#endif
-static struct device_driver au1100fb_driver = {
- .name = "au1100-lcd",
- .bus = &platform_bus_type,
-
+static struct platform_driver au1100fb_driver = {
+ .driver = {
+ .name = "au1100-lcd",
+ .owner = THIS_MODULE,
+ },
.probe = au1100fb_drv_probe,
.remove = au1100fb_drv_remove,
.suspend = au1100fb_drv_suspend,
return ret;
}
- return driver_register(&au1100fb_driver);
+ return platform_driver_register(&au1100fb_driver);
}
void __exit au1100fb_cleanup(void)
{
- driver_unregister(&au1100fb_driver);
+ platform_driver_unregister(&au1100fb_driver);
kfree(drv_info.opt_mode);
}