#endif /* CONFIG_ZORRO */
struct cirrusfb_regs {
- long freq;
- long nom;
- long den;
- long div;
- long multiplexing;
- long mclk;
- long divMCLK;
-
- long HorizRes; /* The x resolution in pixel */
- long HorizTotal;
- long HorizDispEnd;
- long HorizBlankStart;
- long HorizBlankEnd;
- long HorizSyncStart;
- long HorizSyncEnd;
-
- long VertRes; /* the physical y resolution in scanlines */
- long VertTotal;
- long VertDispEnd;
- long VertSyncStart;
- long VertSyncEnd;
- long VertBlankStart;
- long VertBlankEnd;
+ int multiplexing;
};
#ifdef CIRRUSFB_DEBUG
void (*unmap)(struct fb_info *info);
};
-static int noaccel;
+static int noaccel __devinitdata;
static char *mode_option __devinitdata = "640x480@60";
/****************************************************************************/
u_short width, u_short height,
u_char color, u_short line_length);
-static void bestclock(long freq, long *best,
- long *nom, long *den,
- long *div, long maxfreq);
+static void bestclock(long freq, int *nom, int *den, int *div);
#ifdef CIRRUSFB_DEBUG
static void cirrusfb_dump(void);
/****************************************************************************/
/**** BEGIN Hardware specific Routines **************************************/
-/* Get a good MCLK value */
-static long cirrusfb_get_mclk(long freq, int bpp, long *div)
+/* Check if the MCLK is not a better clock source */
+static int cirrusfb_check_mclk(struct cirrusfb_info *cinfo, long freq)
{
- long mclk;
-
- assert(div != NULL);
+ long mclk = vga_rseq(cinfo->regbase, CL_SEQR1F) & 0x3f;
- /* Calculate MCLK, in case VCLK is high enough to require > 50MHz.
- * Assume a 64-bit data path for now. The formula is:
- * ((B * PCLK * 2)/W) * 1.2
- * B = bytes per pixel, PCLK = pixclock, W = data width in bytes */
- mclk = ((bpp / 8) * freq * 2) / 4;
- mclk = (mclk * 12) / 10;
- if (mclk < 50000)
- mclk = 50000;
- DPRINTK("Use MCLK of %ld kHz\n", mclk);
-
- /* Calculate value for SR1F. Multiply by 2 so we can round up. */
- mclk = ((mclk * 16) / 14318);
- mclk = (mclk + 1) / 2;
- DPRINTK("Set SR1F[5:0] to 0x%lx\n", mclk);
+ /* Read MCLK value */
+ mclk = (14318 * mclk) >> 3;
+ DPRINTK("Read MCLK of %ld kHz\n", mclk);
/* Determine if we should use MCLK instead of VCLK, and if so, what we
- * should divide it by to get VCLK */
- switch (freq) {
- case 24751 ... 25249:
- *div = 2;
- DPRINTK("Using VCLK = MCLK/2\n");
- break;
- case 49501 ... 50499:
- *div = 1;
+ * should divide it by to get VCLK
+ */
+
+ if (abs(freq - mclk) < 250) {
DPRINTK("Using VCLK = MCLK\n");
- break;
- default:
- *div = 0;
- break;
+ return 1;
+ } else if (abs(freq - (mclk / 2)) < 250) {
+ DPRINTK("Using VCLK = MCLK/2\n");
+ return 2;
}
- return mclk;
+ return 0;
}
static int cirrusfb_check_var(struct fb_var_screeninfo *var,
long maxclock;
int maxclockidx = var->bits_per_pixel >> 3;
struct cirrusfb_info *cinfo = info->par;
- int xres, hfront, hsync, hback;
- int yres, vfront, vsync, vback;
switch (var->bits_per_pixel) {
case 1:
case 16:
case 32:
info->fix.line_length = var->xres_virtual * maxclockidx;
- info->fix.visual = FB_VISUAL_DIRECTCOLOR;
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
default:
switch (var->bits_per_pixel) {
case 16:
case 32:
- if (regs->HorizRes <= 800)
+ if (var->xres <= 800)
/* Xbh has this type of clock for 32-bit */
freq /= 2;
break;
}
#endif
-
- bestclock(freq, ®s->freq, ®s->nom, ®s->den, ®s->div,
- maxclock);
- regs->mclk = cirrusfb_get_mclk(freq, var->bits_per_pixel,
- ®s->divMCLK);
-
- xres = var->xres;
- hfront = var->right_margin;
- hsync = var->hsync_len;
- hback = var->left_margin;
-
- yres = var->yres;
- vfront = var->lower_margin;
- vsync = var->vsync_len;
- vback = var->upper_margin;
-
- if (var->vmode & FB_VMODE_DOUBLE) {
- yres *= 2;
- vfront *= 2;
- vsync *= 2;
- vback *= 2;
- } else if (var->vmode & FB_VMODE_INTERLACED) {
- yres = (yres + 1) / 2;
- vfront = (vfront + 1) / 2;
- vsync = (vsync + 1) / 2;
- vback = (vback + 1) / 2;
- }
- regs->HorizRes = xres;
- regs->HorizTotal = (xres + hfront + hsync + hback) / 8 - 5;
- regs->HorizDispEnd = xres / 8 - 1;
- regs->HorizBlankStart = xres / 8;
- /* does not count with "-5" */
- regs->HorizBlankEnd = regs->HorizTotal + 5;
- regs->HorizSyncStart = (xres + hfront) / 8 + 1;
- regs->HorizSyncEnd = (xres + hfront + hsync) / 8 + 1;
-
- regs->VertRes = yres;
- regs->VertTotal = yres + vfront + vsync + vback - 2;
- regs->VertDispEnd = yres - 1;
- regs->VertBlankStart = yres;
- regs->VertBlankEnd = regs->VertTotal;
- regs->VertSyncStart = yres + vfront - 1;
- regs->VertSyncEnd = yres + vfront + vsync - 1;
-
- if (regs->VertRes >= 1024) {
- regs->VertTotal /= 2;
- regs->VertSyncStart /= 2;
- regs->VertSyncEnd /= 2;
- regs->VertDispEnd /= 2;
- }
- if (regs->multiplexing) {
- regs->HorizTotal /= 2;
- regs->HorizSyncStart /= 2;
- regs->HorizSyncEnd /= 2;
- regs->HorizDispEnd /= 2;
- }
-
return 0;
}
-static void cirrusfb_set_mclk(const struct cirrusfb_info *cinfo, int val,
- int div)
+static void cirrusfb_set_mclk_as_source(const struct cirrusfb_info *cinfo,
+ int div)
{
+ unsigned char old1f, old1e;
assert(cinfo != NULL);
+ old1f = vga_rseq(cinfo->regbase, CL_SEQR1F) & ~0x40;
- if (div == 2) {
- /* VCLK = MCLK/2 */
- unsigned char old = vga_rseq(cinfo->regbase, CL_SEQR1E);
- vga_wseq(cinfo->regbase, CL_SEQR1E, old | 0x1);
- vga_wseq(cinfo->regbase, CL_SEQR1F, 0x40 | (val & 0x3f));
- } else if (div == 1) {
- /* VCLK = MCLK */
- unsigned char old = vga_rseq(cinfo->regbase, CL_SEQR1E);
- vga_wseq(cinfo->regbase, CL_SEQR1E, old & ~0x1);
- vga_wseq(cinfo->regbase, CL_SEQR1F, 0x40 | (val & 0x3f));
- } else {
- vga_wseq(cinfo->regbase, CL_SEQR1F, val & 0x3f);
+ if (div) {
+ DPRINTK("Set %s as pixclock source.\n",
+ (div == 2) ? "MCLK/2" : "MCLK");
+ old1f |= 0x40;
+ old1e = vga_rseq(cinfo->regbase, CL_SEQR1E) & ~0x1;
+ if (div == 2)
+ old1e |= 1;
+
+ vga_wseq(cinfo->regbase, CL_SEQR1E, old1e);
}
+ vga_wseq(cinfo->regbase, CL_SEQR1F, old1f);
}
/*************************************************************************
unsigned char tmp;
int offset = 0, err;
const struct cirrusfb_board_info_rec *bi;
+ int hdispend, hsyncstart, hsyncend, htotal;
+ int yres, vdispend, vsyncstart, vsyncend, vtotal;
+ long freq;
+ int nom, den, div;
DPRINTK("ENTER\n");
DPRINTK("Requested mode: %dx%dx%d\n",
bi = &cirrusfb_board_info[cinfo->btype];
+ hsyncstart = var->xres + var->right_margin;
+ hsyncend = hsyncstart + var->hsync_len;
+ htotal = (hsyncend + var->left_margin) / 8 - 5;
+ hdispend = var->xres / 8 - 1;
+ hsyncstart = hsyncstart / 8 + 1;
+ hsyncend = hsyncend / 8 + 1;
+
+ yres = var->yres;
+ vsyncstart = yres + var->lower_margin;
+ vsyncend = vsyncstart + var->vsync_len;
+ vtotal = vsyncend + var->upper_margin;
+ vdispend = yres - 1;
+
+ if (var->vmode & FB_VMODE_DOUBLE) {
+ yres *= 2;
+ vsyncstart *= 2;
+ vsyncend *= 2;
+ vtotal *= 2;
+ } else if (var->vmode & FB_VMODE_INTERLACED) {
+ yres = (yres + 1) / 2;
+ vsyncstart = (vsyncstart + 1) / 2;
+ vsyncend = (vsyncend + 1) / 2;
+ vtotal = (vtotal + 1) / 2;
+ }
+
+ vtotal -= 2;
+ vsyncstart -= 1;
+ vsyncend -= 1;
+
+ if (yres >= 1024) {
+ vtotal /= 2;
+ vsyncstart /= 2;
+ vsyncend /= 2;
+ vdispend /= 2;
+ }
+ if (regs.multiplexing) {
+ htotal /= 2;
+ hsyncstart /= 2;
+ hsyncend /= 2;
+ hdispend /= 2;
+ }
/* unlock register VGA_CRTC_H_TOTAL..CRT7 */
vga_wcrt(regbase, VGA_CRTC_V_SYNC_END, 0x20); /* previously: 0x00) */
/* if debugging is enabled, all parameters get output before writing */
- DPRINTK("CRT0: %ld\n", regs.HorizTotal);
- vga_wcrt(regbase, VGA_CRTC_H_TOTAL, regs.HorizTotal);
+ DPRINTK("CRT0: %d\n", htotal);
+ vga_wcrt(regbase, VGA_CRTC_H_TOTAL, htotal);
- DPRINTK("CRT1: %ld\n", regs.HorizDispEnd);
- vga_wcrt(regbase, VGA_CRTC_H_DISP, regs.HorizDispEnd);
+ DPRINTK("CRT1: %d\n", hdispend);
+ vga_wcrt(regbase, VGA_CRTC_H_DISP, hdispend);
- DPRINTK("CRT2: %ld\n", regs.HorizBlankStart);
- vga_wcrt(regbase, VGA_CRTC_H_BLANK_START, regs.HorizBlankStart);
+ DPRINTK("CRT2: %d\n", var->xres / 8);
+ vga_wcrt(regbase, VGA_CRTC_H_BLANK_START, var->xres / 8);
/* + 128: Compatible read */
- DPRINTK("CRT3: 128+%ld\n", regs.HorizBlankEnd % 32);
+ DPRINTK("CRT3: 128+%d\n", (htotal + 5) % 32);
vga_wcrt(regbase, VGA_CRTC_H_BLANK_END,
- 128 + (regs.HorizBlankEnd % 32));
+ 128 + ((htotal + 5) % 32));
- DPRINTK("CRT4: %ld\n", regs.HorizSyncStart);
- vga_wcrt(regbase, VGA_CRTC_H_SYNC_START, regs.HorizSyncStart);
+ DPRINTK("CRT4: %d\n", hsyncstart);
+ vga_wcrt(regbase, VGA_CRTC_H_SYNC_START, hsyncstart);
- tmp = regs.HorizSyncEnd % 32;
- if (regs.HorizBlankEnd & 32)
+ tmp = hsyncend % 32;
+ if ((htotal + 5) & 32)
tmp += 128;
DPRINTK("CRT5: %d\n", tmp);
vga_wcrt(regbase, VGA_CRTC_H_SYNC_END, tmp);
- DPRINTK("CRT6: %ld\n", regs.VertTotal & 0xff);
- vga_wcrt(regbase, VGA_CRTC_V_TOTAL, (regs.VertTotal & 0xff));
+ DPRINTK("CRT6: %d\n", vtotal & 0xff);
+ vga_wcrt(regbase, VGA_CRTC_V_TOTAL, vtotal & 0xff);
tmp = 16; /* LineCompare bit #9 */
- if (regs.VertTotal & 256)
+ if (vtotal & 256)
tmp |= 1;
- if (regs.VertDispEnd & 256)
+ if (vdispend & 256)
tmp |= 2;
- if (regs.VertSyncStart & 256)
+ if (vsyncstart & 256)
tmp |= 4;
- if (regs.VertBlankStart & 256)
+ if ((vdispend + 1) & 256)
tmp |= 8;
- if (regs.VertTotal & 512)
+ if (vtotal & 512)
tmp |= 32;
- if (regs.VertDispEnd & 512)
+ if (vdispend & 512)
tmp |= 64;
- if (regs.VertSyncStart & 512)
+ if (vsyncstart & 512)
tmp |= 128;
DPRINTK("CRT7: %d\n", tmp);
vga_wcrt(regbase, VGA_CRTC_OVERFLOW, tmp);
tmp = 0x40; /* LineCompare bit #8 */
- if (regs.VertBlankStart & 512)
+ if ((vdispend + 1) & 512)
tmp |= 0x20;
if (var->vmode & FB_VMODE_DOUBLE)
tmp |= 0x80;
DPRINTK("CRT9: %d\n", tmp);
vga_wcrt(regbase, VGA_CRTC_MAX_SCAN, tmp);
- DPRINTK("CRT10: %ld\n", regs.VertSyncStart & 0xff);
- vga_wcrt(regbase, VGA_CRTC_V_SYNC_START, regs.VertSyncStart & 0xff);
+ DPRINTK("CRT10: %d\n", vsyncstart & 0xff);
+ vga_wcrt(regbase, VGA_CRTC_V_SYNC_START, vsyncstart & 0xff);
- DPRINTK("CRT11: 64+32+%ld\n", regs.VertSyncEnd % 16);
- vga_wcrt(regbase, VGA_CRTC_V_SYNC_END, regs.VertSyncEnd % 16 + 64 + 32);
+ DPRINTK("CRT11: 64+32+%d\n", vsyncend % 16);
+ vga_wcrt(regbase, VGA_CRTC_V_SYNC_END, vsyncend % 16 + 64 + 32);
- DPRINTK("CRT12: %ld\n", regs.VertDispEnd & 0xff);
- vga_wcrt(regbase, VGA_CRTC_V_DISP_END, regs.VertDispEnd & 0xff);
+ DPRINTK("CRT12: %d\n", vdispend & 0xff);
+ vga_wcrt(regbase, VGA_CRTC_V_DISP_END, vdispend & 0xff);
- DPRINTK("CRT15: %ld\n", regs.VertBlankStart & 0xff);
- vga_wcrt(regbase, VGA_CRTC_V_BLANK_START, regs.VertBlankStart & 0xff);
+ DPRINTK("CRT15: %d\n", (vdispend + 1) & 0xff);
+ vga_wcrt(regbase, VGA_CRTC_V_BLANK_START, (vdispend + 1) & 0xff);
- DPRINTK("CRT16: %ld\n", regs.VertBlankEnd & 0xff);
- vga_wcrt(regbase, VGA_CRTC_V_BLANK_END, regs.VertBlankEnd & 0xff);
+ DPRINTK("CRT16: %d\n", vtotal & 0xff);
+ vga_wcrt(regbase, VGA_CRTC_V_BLANK_END, vtotal & 0xff);
DPRINTK("CRT18: 0xff\n");
vga_wcrt(regbase, VGA_CRTC_LINE_COMPARE, 0xff);
tmp = 0;
if (var->vmode & FB_VMODE_INTERLACED)
tmp |= 1;
- if (regs.HorizBlankEnd & 64)
+ if ((htotal + 5) & 64)
tmp |= 16;
- if (regs.HorizBlankEnd & 128)
+ if ((htotal + 5) & 128)
tmp |= 32;
- if (regs.VertBlankEnd & 256)
+ if (vtotal & 256)
tmp |= 64;
- if (regs.VertBlankEnd & 512)
+ if (vtotal & 512)
tmp |= 128;
DPRINTK("CRT1a: %d\n", tmp);
vga_wcrt(regbase, CL_CRT1A, tmp);
+ freq = PICOS2KHZ(var->pixclock);
+ bestclock(freq, &nom, &den, &div);
+
/* set VCLK0 */
/* hardware RefClock: 14.31818 MHz */
/* formula: VClk = (OSC * N) / (D * (1+P)) */
/* Example: VClk = (14.31818 * 91) / (23 * (1+1)) = 28.325 MHz */
- vga_wseq(regbase, CL_SEQRB, regs.nom);
- tmp = regs.den << 1;
- if (regs.div != 0)
- tmp |= 1;
+ if (cinfo->btype == BT_ALPINE) {
+ /* if freq is close to mclk or mclk/2 select mclk
+ * as clock source
+ */
+ int divMCLK = cirrusfb_check_mclk(cinfo, freq);
+ if (divMCLK) {
+ nom = 0;
+ cirrusfb_set_mclk_as_source(cinfo, divMCLK);
+ }
+ }
+ if (nom) {
+ vga_wseq(regbase, CL_SEQRB, nom);
+ tmp = den << 1;
+ if (div != 0)
+ tmp |= 1;
- /* 6 bit denom; ONLY 5434!!! (bugged me 10 days) */
- if ((cinfo->btype == BT_SD64) ||
- (cinfo->btype == BT_ALPINE) ||
- (cinfo->btype == BT_GD5480))
- tmp |= 0x80;
+ /* 6 bit denom; ONLY 5434!!! (bugged me 10 days) */
+ if ((cinfo->btype == BT_SD64) ||
+ (cinfo->btype == BT_ALPINE) ||
+ (cinfo->btype == BT_GD5480))
+ tmp |= 0x80;
- DPRINTK("CL_SEQR1B: %ld\n", (long) tmp);
- vga_wseq(regbase, CL_SEQR1B, tmp);
+ DPRINTK("CL_SEQR1B: %ld\n", (long) tmp);
+ vga_wseq(regbase, CL_SEQR1B, tmp);
+ }
- if (regs.VertRes >= 1024)
+ if (yres >= 1024)
/* 1280x1024 */
vga_wcrt(regbase, VGA_CRTC_MODE, 0xc7);
else
/* don't know if it would hurt to also program this if no interlaced */
/* mode is used, but I feel better this way.. :-) */
if (var->vmode & FB_VMODE_INTERLACED)
- vga_wcrt(regbase, VGA_CRTC_REGS, regs.HorizTotal / 2);
+ vga_wcrt(regbase, VGA_CRTC_REGS, htotal / 2);
else
vga_wcrt(regbase, VGA_CRTC_REGS, 0x00); /* interlace control */
case BT_ALPINE:
DPRINTK(" (for GD543x)\n");
- cirrusfb_set_mclk(cinfo, regs.mclk, regs.divMCLK);
/* We already set SRF and SR1F */
break;
case BT_ALPINE:
DPRINTK(" (for GD543x)\n");
- if (regs.HorizRes >= 1024)
- vga_wseq(regbase, CL_SEQR7, 0xa7);
- else
- vga_wseq(regbase, CL_SEQR7, 0xa3);
- cirrusfb_set_mclk(cinfo, regs.mclk, regs.divMCLK);
+ vga_wseq(regbase, CL_SEQR7, 0xa7);
break;
case BT_GD5480:
case BT_ALPINE:
DPRINTK(" (for GD543x)\n");
vga_wseq(regbase, CL_SEQR7, 0xa9);
- cirrusfb_set_mclk(cinfo, regs.mclk, regs.divMCLK);
break;
case BT_GD5480:
#endif /* CONFIG_PCI */
#ifdef CONFIG_ZORRO
-static void __devexit cirrusfb_zorro_unmap(struct fb_info *info)
+static void cirrusfb_zorro_unmap(struct fb_info *info)
{
struct cirrusfb_info *cinfo = info->par;
struct zorro_dev *zdev = to_zorro_dev(info->device);
module_param(mode_option, charp, 0);
MODULE_PARM_DESC(mode_option, "Initial video mode e.g. '648x480-8@60'");
+module_param(noaccel, bool, 0);
+MODULE_PARM_DESC(noaccel, "Disable acceleration");
#ifdef MODULE
module_exit(cirrusfb_exit);
* bestclock() - determine closest possible clock lower(?) than the
* desired pixel clock
**************************************************************************/
-static void bestclock(long freq, long *best, long *nom,
- long *den, long *div, long maxfreq)
+static void bestclock(long freq, int *nom, int *den, int *div)
{
- long n, h, d, f;
+ int n, d;
+ long h, diff;
- assert(best != NULL);
assert(nom != NULL);
assert(den != NULL);
assert(div != NULL);
- assert(maxfreq > 0);
*nom = 0;
*den = 0;
if (freq < 8000)
freq = 8000;
- if (freq > maxfreq)
- freq = maxfreq;
-
- *best = 0;
- f = freq * 10;
+ diff = freq;
for (n = 32; n < 128; n++) {
int s = 0;
- d = (143181 * n) / f;
+ d = (14318 * n) / freq;
if ((d >= 7) && (d <= 63)) {
int temp = d;
temp >>= 1;
}
h = ((14318 * n) / temp) >> s;
- if (abs(h - freq) < abs(*best - freq)) {
- *best = h;
+ h = h > freq ? h - freq : freq - h;
+ if (h < diff) {
+ diff = h;
*nom = n;
*den = temp;
*div = s;
d >>= 1;
}
h = ((14318 * n) / d) >> s;
- if (abs(h - freq) < abs(*best - freq)) {
- *best = h;
+ h = h > freq ? h - freq : freq - h;
+ if (h < diff) {
+ diff = h;
*nom = n;
*den = d;
*div = s;
}
DPRINTK("Best possible values for given frequency:\n");
- DPRINTK(" best: %ld kHz nom: %ld den: %ld div: %ld\n",
+ DPRINTK(" freq: %ld kHz nom: %d den: %d div: %d\n",
freq, *nom, *den, *div);
DPRINTK("EXIT\n");