#include <linux/console.h>
#include <linux/mm.h>
#include <linux/slab.h>
+#include <linux/suspend.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
static char *mode_option;
static int noclear, nopanel, nocrt;
-static int fbsize;
+static int vram;
+static int vt_switch;
/* Most of these modes are sorted in ascending order, but
* since the first entry in this table is the "default" mode,
* we try to make it something sane - 640x480-60 is sane
*/
-static const struct fb_videomode geode_modedb[] __initdata = {
+static struct fb_videomode geode_modedb[] __initdata = {
/* 640x480-60 */
{ NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2,
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
0, FB_VMODE_NONINTERLACED, 0 },
};
+#ifdef CONFIG_OLPC
+#include <asm/olpc.h>
+
+static struct fb_videomode olpc_dcon_modedb[] __initdata = {
+ /* The only mode the DCON has is 1200x900 */
+ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, 0 }
+};
+
+static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+{
+ if (olpc_has_dcon()) {
+ *modedb = (struct fb_videomode *) olpc_dcon_modedb;
+ *size = ARRAY_SIZE(olpc_dcon_modedb);
+ } else {
+ *modedb = (struct fb_videomode *) geode_modedb;
+ *size = ARRAY_SIZE(geode_modedb);
+ }
+}
+
+#else
+static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+{
+ *modedb = (struct fb_videomode *) geode_modedb;
+ *size = ARRAY_SIZE(geode_modedb);
+}
+#endif
+
static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
if (var->xres > 1920 || var->yres > 1440)
if (ret)
return ret;
- ret = pci_request_region(dev, 3, "lxfb-vip");
+ ret = pci_request_region(dev, 3, "lxfb-vp");
if (ret)
return ret;
info->fix.smem_start = pci_resource_start(dev, 0);
- info->fix.smem_len = fbsize ? fbsize : lx_framebuffer_size();
+ info->fix.smem_len = vram ? vram : lx_framebuffer_size();
info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
if (par->dc_regs == NULL)
return ret;
- par->df_regs = ioremap(pci_resource_start(dev, 3),
+ par->vp_regs = ioremap(pci_resource_start(dev, 3),
pci_resource_len(dev, 3));
- if (par->df_regs == NULL)
+ if (par->vp_regs == NULL)
return ret;
- writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
-
- writel(info->fix.smem_start & 0xFF000000,
- par->dc_regs + DC_PHY_MEM_OFFSET);
-
- writel(0, par->dc_regs + DC_UNLOCK);
+ write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
+ write_dc(par, DC_GLIU0_MEM_OFFSET, info->fix.smem_start & 0xFF000000);
+ write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK);
dev_info(&dev->dev, "%d KB of video memory at 0x%lx\n",
info->fix.smem_len / 1024, info->fix.smem_start);
return info;
}
+#ifdef CONFIG_PM
+static int lxfb_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct fb_info *info = pci_get_drvdata(pdev);
+
+ if (state.event == PM_EVENT_SUSPEND) {
+ acquire_console_sem();
+ lx_powerdown(info);
+ fb_set_suspend(info, 1);
+ release_console_sem();
+ }
+
+ /* there's no point in setting PCI states; we emulate PCI, so
+ * we don't end up getting power savings anyways */
+
+ return 0;
+}
+
+static int lxfb_resume(struct pci_dev *pdev)
+{
+ struct fb_info *info = pci_get_drvdata(pdev);
+ int ret;
+
+ acquire_console_sem();
+ ret = lx_powerup(info);
+ if (ret) {
+ printk(KERN_ERR "lxfb: power up failed!\n");
+ return ret;
+ }
+
+ fb_set_suspend(info, 0);
+ release_console_sem();
+ return 0;
+}
+#else
+#define lxfb_suspend NULL
+#define lxfb_resume NULL
+#endif
+
static int __init lxfb_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int ret;
struct fb_videomode *modedb_ptr;
- int modedb_size;
+ unsigned int modedb_size;
info = lxfb_init_fbinfo(&pdev->dev);
/* Set up the mode database */
- modedb_ptr = (struct fb_videomode *) geode_modedb;
- modedb_size = ARRAY_SIZE(geode_modedb);
-
+ get_modedb(&modedb_ptr, &modedb_size);
ret = fb_find_mode(&info->var, info, mode_option,
modedb_ptr, modedb_size, NULL, 16);
lxfb_check_var(&info->var, info);
lxfb_set_par(info);
+ pm_set_vt_switch(vt_switch);
+
if (register_framebuffer(info) < 0) {
ret = -EINVAL;
goto err;
iounmap(par->dc_regs);
pci_release_region(pdev, 2);
}
- if (par->df_regs) {
- iounmap(par->df_regs);
+ if (par->vp_regs) {
+ iounmap(par->vp_regs);
pci_release_region(pdev, 3);
}
iounmap(par->dc_regs);
pci_release_region(pdev, 2);
- iounmap(par->df_regs);
+ iounmap(par->vp_regs);
pci_release_region(pdev, 3);
pci_set_drvdata(pdev, NULL);
.id_table = lxfb_id_table,
.probe = lxfb_probe,
.remove = lxfb_remove,
+ .suspend = lxfb_suspend,
+ .resume = lxfb_resume,
};
#ifndef MODULE
if (!*opt)
continue;
- if (!strncmp(opt, "fbsize:", 7))
- fbsize = simple_strtoul(opt+7, NULL, 0);
- else if (!strcmp(opt, "noclear"))
+ if (!strcmp(opt, "noclear"))
noclear = 1;
else if (!strcmp(opt, "nopanel"))
nopanel = 1;
module_param(mode_option, charp, 0);
MODULE_PARM_DESC(mode_option, "video mode (<x>x<y>[-<bpp>][@<refr>])");
-module_param(fbsize, int, 0);
-MODULE_PARM_DESC(fbsize, "video memory size");
+module_param(vram, int, 0);
+MODULE_PARM_DESC(vram, "video memory size");
+
+module_param(vt_switch, int, 0);
+MODULE_PARM_DESC(vt_switch, "enable VT switch during suspend/resume");
MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode LX");
MODULE_LICENSE("GPL");
projects / linux-2.6-omap-h63xx.git / blobdiff